サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Quanum AquaholicブラシレスディープVレーシングボート740ミリメートル(ARR)

Generating Links

Quanum AquaholicブラシレスディープVレーシングボート740ミリメートル(ARR)

価格:

Now save 節約 ¥0.00 ¥0.00

¥19,006.62
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9215000013
送料無料したい? クリックする こちらへ 詳細情報を参照する

それはR / Cボートアクションをブラシレスになると、それは単にこれ以上良くなることはありません!

Quanum Aquaholicは究極のディープVレーシングボート、高速、優れたハンドリングとキラー美貌を提供しています。活気に満ちたレースインスピレーションペイント案と巧妙に適用されるデカールは、あなたがどこへ行って頭を回して確実です!

強力な水冷ブラシレスパワーシステムがプリインストールされた小道具に極端な電力を供給しています。モータはトルクを大量に生産するアウトランナーです。これは、ボートはスロットルを打つ時に、ほぼ瞬時ステップに取得することができます。精密機械加工合金ラダー、プリインストール高トルクステアリングサーボは、鮮明なステアリングレスポンスのためになり、ハードなコーナリング時に直立ボートを保持します。

船体は軽量ながら耐久性のあるABSから構成されている - Aquaholicが他とは異なる場所です。船体は、ちょうどグラスファイバーのような美しい塗装光沢仕上げを持って、まだそれははるかに低いコストで提供しています。デカールは、要素からそれらを密封し、最高品質の外観を提供し、最終的なクリアコートの前に適用されます。

このボートは、事前組み立てのハイレベルにあるボックスのおかげで開いた後、約10分で実行できるようになります。あなたは、単に、ステアリングリンケージを接続し、あなたの受信機を設置舵、プロペラボルトオンにする必要があります、あなたが移動する準備が整いました!

これは、私たちが今までHobbyKingオフィスでここに私たちの手を持っていた最も、楽しくエキサイティングでセットアップブラシレスレースボートに簡単に、我々はあなたがあまりにもそれを好きに知っているダウンの手です!

特徴:
•高性能水冷ブラシレスパワーシステム
•鮮やかなレースインスピレーションペイント案
•軽量ABS船体
•高トルクステアリングサーボ
•3ミリメートルダイレクトドライブフレックスシャフト
•3S 2200mAhのlipoly電池パックを搭載(別売)
•実行する準備はほぼ完了 - 単にあなた自身の無線システムとバッテリーを追加

仕様:
全長:740ミリメートル
ハルの長さ:650ミリメートル
ビーム:180ミリメートル
重量:1140グラム(ワット/アウトバッテリー)
モーター: 水冷2815ブラシレスアウトランナー(付属)
ESC:50A水冷ブラシレス(付属)
サーボ: 高トルク標準サイズ(付属)
ハルの材質:ABS

含まれるもの:
Quanum AquaholicブラシレスディープVレーシングボート(ARR)
すべての必要なハードウェア
ユーザーマニュアル
スペアプロペラ
XT60プラグ
ツール

必須:
2CH送信機と受信機
3S 2200mAhのlipolyバッテリー

  • Quanum Aquaholic Brushless Deep V Racing Boat 740mm
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

VRSS Greg | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 03, 2014

Great boat for the price all you have to do is buy a controller/receiver and a couple of 2200mah 3s lipo batteries and your set. Takes 10mins to set up, the abs plastic is rigid enough, it has a good finish with the decals under the clear coat. Goes 25-30mph as said,which is fast enough for all ages. Overall I like the boat and would recommend it

James | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 10, 2014

Awesome RC boat, for the money especially. It's fast and turns on a dime but it has a few flaws. The stock water intake is too long and ends over the prop nut where it gets no water flow. Take it out and shorten it a quarter inch to where it is half way up the prob blade and you'll get much better water flow, but be careful when tightening the set screw or the plastic will snap off. Before you run it for the first time, take out the drive shaft and coat it in sort of oil (motor oil works well) and do that after every 5-10 batteries (one of the set screws on the drive shaft stripped, not my fault but bad quality). I run a Turnigy 2200 25-35C battery and I recommend getting a 45 C because this battery is pretty hot after a full run. It definitely goes over 30mph and I get 5-8 minutes of run time. Great boat and I would definitely buy another.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 04, 2014

The only maintenance is required is to grease the flex shaft with marine grease and make sure you also put grease on the bearing . When i do this i wipe off old grease off the flex shaft before putting new grease on . do this after 4 or 5 runs .and wipe out any water on the inside the hull after your done . drain any water out between every battery packs . Tape the the top deck with any kind or tape to keep water out of hull the best...

Dakiler | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 24, 2014

Great little boat for the money.
It handles extremly well, and te hardware is good.
The water cooling system works perfect, and the motor and ESC are cool after a run.
I havea also tried a 4s battery, and it takes it no problem at all.
The hatch seals the inside of the hull completly, and does not need sticky tape like other models out there. Speed is sufficiant for this size of model not uncontrolable fast, :-)

BokaPeter | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 09, 2014

It is my first electic boat. It easy to handle. With 2200mAh 3s Lipo 4-5 min runtime.

Good things:
- the price
- very good balanced boat => easy to handle
- nice finished
- the inside component quality is good for this price
- light weight
- for me good speed

Bad things:
- bad mounting quality (in my boat the glue between the main tube and the body was not good mounted, and lot of water laked into the boat. I had te remove the original glue, and use silicon glue)
- plastic prop (and no info about the prop upgade possibility)
- the runtime could be longer
- it is not a precise boat
- not everyting on the boat is well tought out

I would by it again :)

Peter

Diego Hernan | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 29, 2014

It is a great boat. Easy to assemble. Using it with 3s has good performance. I added carbon stabilizers and really has an excellent virage!
For all the fun you want, this boat is the best!

mike | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 17, 2014

Great little boat, plenty fast for me on the 10 dollar 2200 3 cell zippy lipo. The cooling system needed a little work to be better, I shortened the hose routing and moved the outlet closer to the motor and it works like a champ on the stock pickup. All and all it's great, specially for the price.

HaTTe | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 10, 2013

Hi guys
Brushless motor are BL2815 Outrunner brushless motor. Im wonder what is the motor Kv that comes with this boat.

giuseppe | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 10, 2013

ottima imbarcazione e ottimo il rapporto qualit prezzo, mi si spaccata la carena nello specchio di poppa a causa di un urto riparata con resina epossidica e tessuto di fibra di vetro

giuseppe | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 10, 2013

Ottimo scafo veloce e abbastanza stabile, ho avuto un incidente spaccandolo e ho risolto con resina epossidica bicomponente e tessuto di fibra di vetro ed tornato come nuovo. consigliato

  1. 1
  2. 2
顧客ファイル
Aquaholic/Relentless Manual (revised edition) Download [2]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー