Quanum AXE FPV 180レーシングフレームビレットブロック3mmのカーボン

• Overall
• Quality
• Value

Ok

Jan 23, 2018

I purchase 3 pcs when arrived i realize that the FC dont fit, i had to drill the frame.
Not compatible with 1806 motors, only if you use in 2 screws.
Overall its a good compromise for 4$ cant complain.

• Overall
• Quality
• Value

Disappointed

Jan 09, 2018

You'll just receive a bottom plate (3 mm, carbon), a top plate (1,5 mm, fiberglas), a unadjustable camera plate (1,5 mm, fibreglas, tilted at ~110°) with a 15,5 mm lens hole and a set of upper/lower plate screws and red stands. Thats all.
As others wrote before, a normal 36 mm x 36 mm FC like a Holybro Kakute F4 AIO won't fit until you drill yourself some holes or stick it to the bottom plate with some foam tape. Motors even won't fit if they have an bolt hole spacing with like 12 mm x 16 mm.
I'm not that fully satisfied.

• Overall
• Quality
• Value

Customer Rated

Jul 03, 2016

Honestly I am disappointed even though I got the Axe 180 at half price. While its a nice strong frame the mounting options are terrible! It does not take 18XX motors at all as the mounts are for 3mm bolt not 2mm. It also cannot take a standard 36x36mm control board as the mounting X is smaller then the 30.5mm that is needed. I had to mount the PDB on vibration tape and mount the control board to that. I would recommend the Diatone Lizard 180 or Kim 180 instead which are both less and 100pcnt carbon. Sure this has an interesting shape but so does the Lizard 180.

• Overall
• Quality
• Value

Certified Buyer Rated

May 03, 2016

Nice quad, shame it comes with fibreglass upper deck and camera plate. How to buy the carbon option! make sure you order in the same order! The bottom plate is 3mm, not the 3.5mm as quoted in the description. It's fine for a 180, but it would have been much better if it was the quoted 3.5mm!