サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

レース32レースフライトコントローラF303(デラックス)

Generating Links

レース32レースフライトコントローラF303(デラックス)

価格:

Now save 節約 ¥0.00 ¥0.00

¥6,778.67
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
387000090-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

まず、性能と価格の両方のフィニッシュラインを横断して、チェッカーフラッグを取るために今ちょうど待っています! Race32フライトコントローラは、軽量、フル機能のフライトコントローラは、あなたが必要エッジを与えることができますクワッドレーサーのために開発されてきました。

Cleanflightと完全な互換性レース32 FCは素晴らしいSTM32 F3プロセッサを含む、最新のボードの主要な機能のすべてを持っています。より高速なARM-のCortex M4コアは、効率的な飛行の計算およびループ回数のための浮動小数点ハードウェアユニットを持って倍の速度、前世代STM2 F1ボードとしてあります。

機能の完全なランチRace32は深刻なクワッド/マルチコプターパイロットのための賢い選択のフライトコントローラです。

特徴:
•ハイブリッドプラグのセットアップ、JSTプラグやピンコネクタ用スルーホール。ポート上の妥協はありません。すべて同時に、すべてのモジュールのすべての機能をサポートし、。
•保護ケース
•スタック可能な設計 - のOSD配電盤との統合のための完璧な
•ブラックボックスフライトログ記録
•浮動小数点ハードウェアユニットとより高速ARM-のCortex M4コアを持つ次世代STM32 F3プロセッサ。
•プラグは、基板の同じ側に位置します
•ESCは、サーボ用の穴のコネクタを介して4 PWM 3ピン。ワンショットESCのためのフルサポート
•Sバス、SumH、SumD、SPEKTRUM 1024/2048、XBUS、PPM、PWMレシーバをサポートします。
•内蔵インバータ
•プログラム可能なLEDの専用出力
•バッテリーはポートブザー、ポートを監視します
電圧と電流のための•PWRポート
高精度低高度の位置保持のための•ソナーのサポート
•バロメーターは、簡単に風を単離するためのボードの下部に取り付けられました
•クロスプラットフォームのGUIを介して、フライトコントローラの設定(ウィンドウ/ OSX / Linuxの)
•固定翼、tricopters、クワッドローター、hexacopters、octocopters、よりサポートします。

仕様:
寸法:36 X 36ミリメートルボード30.5ミリメートル取り付け穴付き
重量:5グラム
CPU:FPUの256kのフラッシュとSTM32F303
ジャイロ:MPU6050
バロメーター:MS5611
磁力:HMC5983
ポート:UART1 / OSD、UART2 / GPS、UART3 /シリアルRX、I2C

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

SHELDON | 確認済みの購入者

  • Overall
  • Quality
  • Value

works perfectly

Mar 19, 2022

good product good name difficult, to use at first .solved problems on u-tube and cheap.

robert | 確認済みの購入者

  • Overall
  • Quality
  • Value

Great FC with plugs so no soldering

Feb 11, 2021

Shame this is discontinued, get one if you can, load with inav and put a gps on and its rock solid. You have to remove from the case and short out the jp2 pads, then plug in the usb and run the inav configurator. When flashing the bar changes from blue to red and states 'error'. But disconnect and re plug in to usb and run configurator, all is fine.There is an instruction sheet which shows the board and all its connections. The holybro nano gps was virtually plug and play as was the BN220. The Holybro has an onboard compass so you have to sever the connection on JP1. You can do this by using the edge of a stanley blade. If you use the BN220 gps, that has no compass and was truely plug and play. Obviously configuring it in inav is another thing but plenty of documentation/ videos on the net. I like the plugs, I wish more FC's had them. Pad it well, this board doesnt like much vibration.

Federico | 確認済みの購入者

  • Overall
  • Quality
  • Value

Works Fine

Jul 29, 2020

For updating firmware, I needed to unckeck "No reboot Sequence" and then I was able to flash it. It gives an error when "checking", but at that moment disconnect and reconnect the board and it is already flashed. For installing Betaflight, first update cleanflight to the latest for SPRACINGF3

Joe | 確認済みの購入者

  • Overall
  • Quality
  • Value

Great value

May 17, 2020

Voltage monitoring doesn't work correctly

Agostino | 確認済みの購入者

  • Overall
  • Quality
  • Value

ottimo prodotto

Apr 28, 2020

Un regolatore fantastico e acquistato ad un prezzo ottimo complimenti

Agostino | 確認済みの購入者

  • Overall
  • Quality
  • Value

Prodotto ottimo

Mar 12, 2020

Prodotto eccezionale un fly controller di tutto rispetto a un prezzo fantastico

Benjamin | 確認済みの購入者

  • Overall
  • Quality
  • Value

Never got to work. Definitely not for beginners.

Sep 23, 2019

Seems like more experienced users got it to work but I'm cutting my losses. Expect trial and error using bits of information from random reviews. I'm a beginner and would discourage other beginners from getting this FC.

robert | 確認済みの購入者

  • Overall
  • Quality
  • Value

Good FC but PWM map wrong from factory

Jun 10, 2019

Good board, special thanks to Bruno who worked out the correct PWM mapping. If you are seeing the aux channels moving instead of the AETR channels in cleanflight, remap in CLI mode as follows - map AE34TR12 dont forget to save. Thanks to Bruno who stopped me throwing this FC in the bin.

Dany | 確認済みの購入者

  • Overall
  • Quality
  • Value

deff

Mar 19, 2018

flashen with ????

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 09, 2016

A good one if you have to build with the small white connectors

  1. 1
  2. 2
顧客ファイル
Manual A Download [141]
Manual B Download [158]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!