公演 : すべてのカテゴリ 90 送受信機/サーボ 639 送受信機 255 全ての受信機 133

RADIOMASTER RP1 V2 FCC ExpressLRS 2.4GHz Nano Receiver

RADIOMASTER RP1 V2 FCC ExpressLRS 2.4GHz Nano Receiver

0 レビュー

価格:

Now save 節約 $0.00 $0.00

$18.99

数量:

出荷先:

Global

購入済み

お気に入りに追加する

対象となる注文で送料無料

現在の状況:

在庫あり

SKU:

1022720077

個数:

Now save 節約 $0.00 $0.00

$18.99

送料無料したい？ クリックするこちらへ詳細情報を参照する

この製品を共有して 95 ポイントを獲得 ($0.95) [ ? ]

製品説明

The RadioMaster RP V2 series of receivers now have a built-in TCXO (Temperature-Compensated Xtal Oscillator). The TCXO ensures high stability and accuracy in frequency control and compensates for temperature variations. This results in consistent and reliable signal reception, even in extreme temperature conditions. It also reduces frequency drift over time, providing long-term frequency stability and preventing signal degradation. This provides a superior performance in demanding environments and enhances the flight experiences.

The RP1 2.4GHz ELRS Nano receivers use the high-performance, revolutionary ExpressLRS open-source system. The Nano receivers were designed by the ExpressLRS development team, and feature the ESP8285 MCU and SX1280 RF chips. WiFi is built-in so that you can easily upgrade the firmware and configure the receiver using your PC or mobile phone. Other features of the V2 are an upgraded rigid antenna with a UFL socket and improved solder pads.

Due to the low-latency and high-refresh-rate RF module, the RP1 is ideal for FPV racing or long-range flying, they are also compact and ultra-lightweight making them perfect to suit most applications. The RP1 Nano receiver is available in either an FCC or a European LBT version, please check the specifications below for the supported protocol.

Features:
• Improved PCB design for better heat dissipation
• Upgraded rigid antenna with UFL socket for greater durability and performance
• Available with either FCC or LBT-compliant protocols (see specs for details)
• Improved solder pads making the solder joints easier
• Built-in a TCXO (Temperature Compensated Xtal Oscillator) for accuracy and stability
• Compatible with 2.4GHz ExpressLRS modules and transmitters

Specs:
Product: RADIOMASTER RP1 V2 FCC ExpressLRS 2.4GHz Nano Receiver
Frequency Range: 2.404 - 2.479 Ghz
Compliant Protocol: FCC
Firmware Version: ExpressLRS V2.4 pre-installed
Type: ISM
MCU: EPS8285
RF Chip: SEMTECH SX1281
Telemetry RF Power: 10mW
Antenna: 65mm 2.4GHz T Antenna
Maximum Refresh Rate: 500Hz/F1000Hz
Minimum Refresh rate: 25Hz
Input Voltage: 5V
FW Target: RadioMaster RP1/2 2400 RX
Bus interface: CRSF
Dimension: 13mmx11mmx3mm
Weight: 2.2g (Including antenna)