CD-点火2.1HP / 1.54キロワット/ワットRCGF 15ccガスエンジン

• Overall
• Quality
• Value

Rcfg 15cc

Mar 25, 2019

Easy to tune easy to start right out of the box very little vibration with this motor was very impressed for the price and the quality thank you hobby king

• Overall
• Quality
• Value

Not real powerful

Jan 15, 2019

A very nicely built engine, starts easy, idiols great and is very reliable. but don't expect 2.1hp running a 14×7 prop on a 60/90 size airframe and it struggles even tried a 13×8, will have to experiment with different props.
Would highly recommend it for a trainer but not something requiring performance.

• Overall
• Quality
• Value

I got this engine in HobbyKing soukio 60.So far it really runs great.I yous Klotz bean oil at 20 percent.Its a little rich for an an engine with roller bearing con rod,i got an NGH that calls for 20 percent so i keep it simple and run one mix.The only thi

Jul 08, 2018

I got this engine in HobbyKing Soukio 60.So far it really runs great.I yous Klotz bean oil at 20 percent its a little rich for an engine with roller bearing con rod but i gt an NGH that calls for 20 percent so i keep it simple and run one mix.The only thing you have to remember is to pull the gas line off and run all of that gas out of the fuel pump,that caster will get thick in the diaphram pump when the gas evaporates.So far so good.

• Overall
• Quality
• Value

Good Engine

Jun 28, 2018

Today i flew the first time with my Carbon Cub 15cc from Hangar 9,
RCG15 cc 15x6 prop from Aeronaut ,
7800 rpm and idle at 1900 rpm, 3,2 Kg thrust , Aircraft weight 5,9 Kg ,wingspan 2200 mm
The engine runs and runs without problems , great engine. I ordered another one for my 50 size warbird

• Overall
• Quality
• Value

I put this engine on .60 airplane. It is a good engine but not much powerfull. The big problem are the spare parts. HK does not support for any spare sparts. I needed a replacement muffler and it is impossible to find in the marcket because this engine is

Jun 12, 2018

I put this engine on .60 airplane. It is a good engine but not much powerfull. The big problem are the spare parts. HK does not support for any spare sparts. I needed a replacement muffler and it is impossible to find in the marcket because this engine is a old version. Now the rcgf sells only the CB version that has a different muffler. Same for the packings. With the 14x8 wood propeller it reaches 7700 rpm.

• Overall
• Quality
• Value

I am putting this engine on my Sukio?The problem is its going to be sticking out a little bit longer than expected.This is about the right size engine for this airplane?Will see?The 17 NGH will go on my second Zlinn 50.The other Zlinn 50 i have has a 20 g

May 19, 2018

I am putting this engine on my Sukoi?The problem is its going to be sticking out a little bit longer than expected.This is about the right size engine for this size airplane?Will see?The 17 NGH will go on my second Zlinn 50.The other Zlinn 50 i have has a 20 gas RCGF what a monster?Will see?

• Overall
• Quality
• Value

Got it the other day,made a mount bracket out of some hickery i milled on my band mill.Mounted it on my outside bench got some gas that i used in my NGK engine.I am using Klotz bean oil for lube.Fired right up.Seems OK does not have a sleeve like the NGK

May 08, 2018

Got it the other day,made a mount bracket out of some hickery i milled on my band mill.mounted it on my outside bench got some gas that i use in my NGK 17 engine.I am using Klotz bean oil for lube.Fired right up.seems ok.Does not have sleeve like the NGK has.does not have schneral porting like NGK has.It has little reeds.This is going to be very interesting?

• Overall
• Quality
• Value

Nice engine!

Feb 24, 2018

I am very happy with the engine, only the exhaust provided does not silence it, and i have used a exhaust of a 10cc webra engine with a gasget and that works fine, i am testing it now with a resonance exhaust of the same 10cc for additional power. Be sure to use the right prop as with a 22 inch prop the rpm is not coming above 7000 rpm then with a smaller prop (read the manual for the exact size) the engine runs at 9500 RPM

• Overall
• Quality
• Value

vorrei sapere esattamente la posizione del CG

Jan 16, 2018

il motore non mostra nessun segno di usura di un collaudo in fabbrica per cui non si capisce come possa esser stato collaudato inoltre la leva del gas non è utilizzabile cosi come è fatta.

• Overall
• Quality
• Value

RCGF 15CC

Nov 01, 2017

EXCELENTE MOTOR, FACIL DE ENCENDER Y CARBURAR. CON ESTOS PRECIOS ES MEJOR QUE LOS MOTORES DE NITRO.
SEGUIRE USANDO ESTOS MOTORES SON DE LO MEJOR