新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • USA

モジュラー組立システムでRotorBits TriCopterキット(KIT)

モジュラー組立システムでRotorBits TriCopterキット(KIT)

QTY:

Now save save AU$33.77 AU$33.77

Special Price AU$6.24 AU$6.24

You save save AU$33.77 AU$33.77

Was  AU$40.01

Stock:
重量:
630 g
SKU:
171000412-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
battery
servo
motor
acc
商品概要

あなたはレゴとエレクターセットを脱却している可能性がありという理由だけで楽しいが停止することがあり意味するものではありません。 RotorBits、無限の可能性のモジュール構造のセットをご紹介します。標準化された接続と寸法の考え方に基づいて、構築することができるものに唯一の制限はあなたの想像力です。

RotorBitsトライヘリコプターはずっと愛し、偉大な飛行トライヘリコプターにユニークな単純なテイクを作成するには、RotorBitsモジュラー部品の独創的な適応です。トライヘリコプターで使用される固有のビットのうちの1つは、ギア噛合するチルト機構です。チルト機構は、以前に複雑な運動チルトアセンブリを取り、ちょうど2つのギアやサーボにそれを簡素化します。モジュラーチルトユニットは、ただのRotorBits 10mmのシャフトへスリップすることができます。鮮やかな色のTRIセンタープレートは45x45mmは、飛行コントローラやその他の付属品とのビットを適合させるためのさまざまな規定のための支柱を統合しました。着陸スキッドが地面スキミングの楽しみのためにジッパーネクタイ離脱設計と月着陸船丸いカップの脚を持っています。単純なモジュール式の考え方は、複雑なアイデアの上に戻って時々に楽しみをもたらし、アセンブリスナップします。

RotorBitsコンポーネントは、あなたが混在し、あなたの心のコンテンツに一致することができ、複数のプロジェクト間で交換することができます!ビットのあなたのコレクションが成長し、概念が進化するにつれ、あなたは可能性は無限であることがわかります。あなたは、誰が次の思い付くだろう知っています! RotorBitsのみ再構成、時代遅れすることはできませんアイデアです。

特徴:
•モジュラー建設を一緒に滑り
•耐久性のあるガラス充填ナイロン、カーボンパーツ
•軽量
•適応性と再利用可能なRotorBits部品
•ギア駆動ティルトローター

仕様:
身長:155ミリメートル
重さ:258グラム
ホイールベースまたはサイズ:555ミリメートル

RotorBitsが含まれています:
3×カーボンスパー
3×ランディングフィート
3×着陸脚
1×トライセンターマウント
2×DSTモーターマウント
1×チルトサーボモーターマウント
組み立て固定具とジップタイの1×バッグ

必須:
3×DST-1200kvまたは同等のモーター
3×20AマルチローターのESC
1×9グラムサーボ
3×10インチの小道具2 CW 1 CCW
1×フライトコントローラ
11.1Vのlipolyバッテリー3S 1×1500〜2200mAhの
1×5chの無線システム

Product
Specifications

追加情報

  • 単位:
    171000412-0
  • Brand:
    いいえ
  • 重量(g )
    630.00
  • 長さ
    330.00
  • Width:
    120.00
  • 高さ:
    180.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
cumple con mi expectativas. se ve fabricado con muy buena calidad y muy ligero.
deberia llevar los taladros del carbono hechos.
Quality
Value
Overall
Quality
Value
Overall
Surprisingly heavy and there is a lot of slop in the servo connection. Most of the slop can be removed by gluing the components together though. Quite enjoying it so far.
Quality
Value
Overall
Quality
Value
Overall
The RotorBits Tricopter is simple yet elegant and easy to put together! It's like Lego for big kids and can easily be assembled with little knowledge in the area. I love the colour scheme and it is easily orientated in the air. The landing gear is sturdy and the zip-ties hold together really well. My only criticism (and the reason I gave the quality one less star) is because I had do some rectification the servo-tilt section and the gears. The servo they recommended/showed in the picture did not fit in the servo bay and the nylon gear was far too small for the gear teeth and it was hard to fix. I ended up super-gluing it and it managed. HobbyKing perhaps release a new version? Other than that I love it. And it is great value for money!
Quality
Value
Overall
Quality
Value
Overall
Brilliant bit of kit. Got me started and in the air nicely. very please. servo mount is a bit rubbish. but works extreeeemly well for the price.
Quality
Value
Overall
Quality
Value
Overall
Got one of these in the mail today... Very robust and well designed kit.
Decided to order another one to build for night flying with some led light strips.
Pretty easy to put together.. I used the KK2.1 control board and setting it up was a breeze..
I assigned the autolevel to my landing gear switch so I could easily switch back and forth for acrobatic modes.
I used plush 18 amp esc.. DT 700 kv bell motors and an orange spektrum compatible receiver with satellite Corna 929 metal gear 9 gram servo for the yaw.
10x4.5 slowfly props (2 CW and 1 CCW) and get an easy ten minutes with 2200 mah Turnigy batteries.
I give it a hearty two thumbs up.. (ps.. I didn't use the screws and bolts per directions
I simply drilled a pilot hole and tapped it for the screws on one side.
Built a battery tray with 1.5 glass plate cut 1.25 x 7" and suspended it from the bottom with wire ties.
Quality
Value
Overall
Quality
Value
Overall
I have two rotorbits tricopters and they are excellent very tough. I would highly recommend them
great for general fun flying and they fly great with the KK2 and recommended motors. Thanks Hobbyling for a great bargain.
Quality
Value
Overall
Quality
Value
Overall
Please do not overlook this frame kit !! I have built and crashed more multirotor kits then I care to admit to. This is the best kit I ever built. The first time that everything fit to a perfect match and ended up being one of the strongest one I have. Very Perice fitting of all components . May be a bit heavy . I love it !!!!
Quality
Value
Overall
Quality
Value
Overall
Received my kit today. A bit disappointed as the carbon fiber rods that come with it don't have holes , so you have to either buy the jig set for it or drill the holes very carefull.

The kit is very neat and nice .It Seems to be strong enough to handle some crashes. But this I will find out soon.

Quality
Value
Overall
Quality
Value
Overall
Awesome kit. My first multirotor and I was impressed with its quality. My only gripe was the servo mechanism. The recommend led servos do not fit without alot of fiddling around. Otherwise im happy with it.
Quality
Value
Overall
Quality
Value
Overall
This was my first multi-rotor kit so i can't compare it to anything but i will say this i am happy with this kit. It was simple to put together and using the recommended electronics except for using my own servo it flies great . Very stable using the KK 2.1HC. The reason for 4 stars are because it did require some modification to the servo mounting area for my servo to fit properly as well as having play in the back area where the rear motor is mounted on. This was fixed using super glue :) Great product!!! Thanks Hobbyking!!!
Quality
Value
Overall
View all reviews
Upload
Videos
  • RotorBits TriCopter Kit With Modular Assembly System

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。