新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

Sbach 342-30e 1323ミリメートルスポーツ(ARF)

Sbach 342-30e 1323ミリメートルスポーツ(ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
3950 g
SKU:
252000002

Combine

essential items and
esc
battery
servo
商品概要

Sbach 342は、この素敵な価格のバージョンのいずれかになり、そうでない場合は、最も人気のある曲技飛行モデルの周りにする必要があるスポーツは妻と銀行の支店長を乱すことなく、Sbachを飛ぶ構築したいそれらのパイロットに最適です!

サイズ面では、このモデルが構築するためのいくつかのpresenseが、容易に輸送されるのに十分小さく、安価を持っているのに十分な大きさのクラブのチラシ、に最適です。機体が十分になされているとも適用覆う、供給ハードウェアは価格与えられたsusprisingly良好であり、モデルは翼プラグインと非常に強力な磁石で固定さ大きな天蓋には本当に実用的です。

構築する本当に安いです同様に組み立てやすく、このSbach 342が飛んで喜びの時間を与えるだけバルサモデルが提供できることを仕上げと耐久性のようなものを持っています偉大なスポーツの曲芸飛行モデルです!

特徴:
良質伝統的なバルサ建設
総合的なハードウェアが含ま
ニースサイズモデル
構築する安いです
高速かつ簡単な飛行場アセンブリ

仕様:
翼幅:1323ミリメートル
長さ:1340ミリメートル
乾燥重量:1355グラム(株式会社ハードウェア)
ウィングエリア:38.5dm2

必要なもの:
独自の4チャンネルTX / RX
4×高トルクMGの12グラム〜16グラムのサーボ
42ミリメートルブラシレスアウトランナー
60A ESC BEC /ワット
3300mAh〜4000mAh 4S Lipolyバッテリー

Product
Specifications

追加情報

  • 単位:
    252000002
  • Brand:
    N/A
  • 重量(g )
    3950.00
  • 長さ
    1110.00
  • Width:
    230.00
  • 高さ:
    400.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Finally got the box today. The very first thing i looked for are the decals. And it's not there. Very frustrated.
Anyhow, quality is good enough. Started building and notice that some parts are missing. Missing a control rod, I don't have the servo plate for rudder (pull-pull system). I still have to see how this goes.





verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
super, great, good, recomennded
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good plane but I had problems in assembly because the rod is wider than hole in the clevis. I have Zippy Compact 3300 mAh 4s and Turnigy Aerodrive SK3 - 4250-500kv Brushless Outrunner Motor and I haven't got problems with CG. Also it is bad that there are no spinner included.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
First thing that impressed me was that it came in a crush proof box. I live near the US warehouse, I will call all orders
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
modello molto buono per il prezzo che costa attenzione rinforzare bene tutto il castello motore .come motorizzazione utilizzato un 4250 di derivazione sbach 1400 epo, elica 13x8 , alimentazione 4s 3700 35c ,servi corona. modello dal volo veloce vivamente consigliato per gli amanti del genere
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The horizontal stab and the firewall must be reinforced.
After about 8 flights, I noticed that the horizontal stab was wiggling quite a bit and seems to have some internal structural failure.
I recommend pulling off the skin and reinforcing prior to flight.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
tres beau model, de bonne qualite et d'une finition soigne.premier vol ce WE pas de probleme avec un CG regle a 90mm du BA.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great covering job and fiberglass cowl. Now on to business...
Mismatched hardware; cowl barely squeezed over the front bulkhead making it very difficult to get it to cover the canopy and prevent it from blowing off (seen this on other HK planes). Canopy did not fit properly on the magnets (warped or the fuse was twisted) so a canopy latch is a must. The canopy WILL fly off, especially when the firewall flexes so bad and pulls away from the canopy notches releasing it in mid flight.
On the plane I received it was absolutely necessary to reinforce the firewall/motor mount with gussets as well as bracing under the battery tray. The flex in the firewall allowed the motor to move drastically under throttle and cause porpoising. I had to add so much lead to the nose to get it balanced I didn't really like how it flew. The other review said 2 3000mah packs and it would still do 3D? Sounds like a pretty heavy setup for 3D to me.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall