Scratch and Dent Durafly™ Excalibur High Performance 1600mm (63") V-Tail Glider (PNF)

This was returned to us due to a faulty tail servo, other than that this product is brand new. You will need to fit 2 identical 9g servos in the tail, you will then be good to go.

Warranty:
No warranty available for this item.
Item used as a display item only.
Please do not ask questions as the item will be sold out within 24hrs.
No backorders allowed.

Scratch & Dent items are sold as-is.
Because HobbyKing loses money on each Scratch/Dent item sold we cannot offer warranty or answer questions on these products.

Item will be deactivated once a 0 stock level is reached.

Forged for a King in a distant realm, the legendary Excalibur is here.

The most anticipated Durafly release this year, The Excalibur must be flown to be truly appreciated. Innovative design features, such as the cantilever forward swept wing, V-tail tail surfaces, incredibly strong construction and stunning lines.

Just like the legendary sword, Excaliburs strength is paramount. The engineers at Durafly were given their hardest challenge yet, to design a wing that is ultra thin but incredibly strong in EPO foam!

The wing has carefully positioned carbon fiber reinforcement and pre-tensioned glass fiber strips. The fuselage is feature packed with a square carbon fiber tube and glass fiber strips. The V-tail along with control surfaces are reinforced. All these features combine to make the Excalibur a weapon.

Servos are all pre-installed with a whopping 3542 800kv Aerostar brushless outrunner motor up front. 60amp Aerostar brushless speed controller. Two piece removable wing makes assembly fast with wire-free PCB connection between the wing and fuse.

Rule the sky with the Excalibur.

Features:
• Highly compressed EPO foam construction
• Available in both PnF and Kit variants
• Nose cone supplied for slope soaring
• Reinforced with carbon fiber and glass fiber
• Extreme speed, Awesome maneuverability
• Bolt together plug and play design
• Unique forward sweep wing design
• V-tail tailplane
• Aerostar 3542 800kv brushless outrunner
• Aerostar 60amp brushless ESC
• Folding 13x7 Aerostar carbon fiber propeller
• Quality Servos
• PCB servo wing connector
• Stunning looks
• Intake cooling features
• Ready to fly in minutes

Specs:
Wingspan: 1600mm (63")
Length: 1010mm
Flying weight: 1250g
Controls: 4 Channel (Ailerons, Elevator, Rudder (V-Tail), Throttle)
ESC: Aerostar 60amp brushless ESC
Motor: 3542-800kv brushless outrunner
Propeller: Aerostar folding carbon fiber 13x7

Required:
Minimum 4ch Transmitter capable of V-Tail mixing
Appropriate 4ch receiver
1 x 1800~2200mAh 4S LiPoly high "C" rated battery

Included:
1 x Durafly Excalibur