新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global

シャーク高性能レーサー/グライダー1228ミリメートルコンポジット(PNF)

シャーク高性能レーサー/グライダー1228ミリメートルコンポジット(PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
1778 g
SKU:
224000002

Combine

essential items and
battery
acc
商品概要

Hobbykingシャークは低速お金のための高速スリルを提供しています独特のF3Aスタイリングを備えた高性能ハイブリッドグライダー/パイロンレーサーであり、驚くほどの複合高性能速機のために、それはそう、すべてのハードワークが行われているプラ​​グNフライです。

機体はバルサであり、取り外し可能な1個のアイテムのみ水平安定板/エレベーターであるガラス繊維の胴体と主翼、から構成されています。仕上げはそれだけでも同様である、速く見える、間違いなく存在し、非常に優れた耐久性があり、それは速いです!モデルこのクイックニーズが十分に構築されると全くコーナーがカットされていない、エルロンのが「ライブ」であるが、ヒンジ結合高トルク9グラムサーボのは全体で事前装着されている&すべて含まれるハードウェアは、信頼性とパフォーマンスのために頑丈かつ良質です。

プレフィットブラシレスinrunnerモータはパワーの多くを有しており、滑りやすい空気フレームと相まって、巨大なにやにや笑いはあなたのフィールドでの一日のためになるだろうしています。品質合金スピナーであるので、あなたのラジオ、lipolyとせいぜい時間の作業のカップルは、あなたといくつかのハイスピー​​ドアクションの間に立って、そのすべてであるため小道具やスペアが含まれています。 Hobbykingサメのレーサーは、低価格、品質、ルックスの良さ、実用性、組み立てやすさ、耐久性、そしてもちろんの素晴らしいパフォーマンスの無敵の組み合わせを提供しています、それはスピードフリーク必見です!

仕様:
翼幅:1228ミリメートル
長さ:737ミリメートル
ウィングエリア:16.2dm2
エアフォイル:MH43が変更されました
フライング重量:750グラム〜900グラム
モーター:28ミリメートルInrunnerブラシレス2600kv
ESC:30A BEC /ワット
サーボ:9グラム×3

含まれています:
説明書
合金スピナー
4.75x4.75プロップ×2

必要なもの:
独自の4 ChのTX / RX
2200mAhの3S Lipolyバッテリー

Product
Specifications

追加情報

  • 単位:
    224000002
  • Brand:
    N/A
  • 容量(mAh )
    いいえ
  • 重量(g )
    1778.00
  • 長さ:
    1290.00
  • Width:
    100.00
  • 高さ
    190.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
top du top !! une bombe et ca gratte comme un pur planeur !!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Arrived with firewall brokeaway, wing joint line in bad finishing ( upper/lower parts ).

Maiden flight lasts only one minute, motor problems due ESC overheating.

ESC burned after 3 flights.

Aileron trimming awful due to wing washout assimetric incidence.

Do not worth your money ....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I strongly recommend you when you buy this airplane to buy a landing gear as well.
Like this plane is a low wing and fast flying that will avoid dents on the wing and propeller. Don't forget the thumb if you think this an useful advise...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Had some bad luck with my delivery. Wing was broken, motor mount glued distortedly and wing didn't fit entirely with the body. During maiden, aileron horn got loose and elevator centre broke down.



Now wing is fixed using fiberglass cloth, motor mount attached again, both ailerons glued and support bar added to the elevator both sides.



Body quality was good, wing paintings not. But... look at the price. All electronics worked well and speed was enough for me.



My flying video is here: http://youtu.be/Zheih4Hi0Ls
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I maidened mine yesterday and I agree to the earlier "speakers" about the weak mtrl in the elevator. I will replace mine....

I also had a big grin on my face during the whole flight....it was a high "WOW" factor...I used a 3c2200mah lipo.

Has anybody switched the propeller to a larger one?...what speeds are we talking on this baby?

Well guys, I can really recommend this baby, lots of value for the low bucks...get m while they last!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ok to start off ordered this bird a few weeks ago just got it today shipping was slow but hey what do you expect it is coming from Hong Kong. All the included equipment motor, servos, ESC are top notch. Servos center well motor stays cool in flight everything electronically is great. I personally swapped out the 30amp esc for a 54amp so i could go 4cell if i wanted to. The plane is beautiful, the fiberglass body really catches the eye of your flying buddies at the field. There are a few defects i noticed however the wing does not fit absolutely flush with the fuse there is a tiny 2mm gap at most and is only notice able up close. Also instructions Manual is pretty crappy it helps a bit but otherwise figure stuff out yourself and improve the design. maidened the plane today all i have to tell you is that i was grinning the whole time. when you do a high speed fly by you hear this beautiful whistle that is music to any rc pilots ears. overall well worth the money you will not be disappointed. i will be doing a video review of this plane soon keep your eyes open for it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
As an upgrade HK could include in the kit some adesives for the all red wing. I installed in mine three 60mm wide white stripes from L.E. to T.E. in the bottom of each wing and a 20mm wide white stripes from root section to tip section in each upper wing panel. An all red wing is difficult to see in the air mainly in this fast plane. To avoid scratches in bottom fuse I glued a 10mm thick tape from tail to front. I mixed the two aileron servos to get a flap help to reduce speed at landings. The liteply for the motor mount is too soft and after one fly the screws get loose. I change it for a carbon fiber one.All in all this upgrade is better. HK please, don't use that soft balsa for the elevator.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It seems to be an upgrade from the Drago Red with its very slim fuse. The craftsmanship in the kit is of good quality. No noticiable air bubbles in the fuse paint nor in the wing. The fuse now has a thicker layer of fiber to avoid cracks in landings. The horizontal stab remains a weak point in the model as was for the Drago Red. The elevator is of a very light and soft balsa. For safety and for don't waste money you should reinforce it up and down at center section with carbon fiber sticks (50mm x 4mm). The bigger lipo pack you could install in the Drago Red fuse was a mere 1000mA 3S. Now you can install a 2200mA with ease. Now you can remove the elevator servo by unscrew the two screws. In Drago Red it was impossible. Good to know that HK is taking care about its products. There are a bunch of products that need this treatment too.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Pylon Racer

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。