New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

SK LIGHTNING 480クアッドヘリコプターフレーム(キット)

SK LIGHTNING 480クアッドヘリコプターフレーム(キット)

Discontinued Product

Please continue searching for a similar product.
重量:
931 g
SKU:
426000039-0
WANT FREE SHIPPING? Click here to find out more!

SK LIGHTNING 480クアッドヘリコプターフレーム(キット)

SKライトニングは、カメラ・プラットフォームとして使用するための安定したクワッドです。それは、強力な、軽量、ガラス繊維アームとフレームが付属しています。 480ミリメートルホイールベースを持つ偉大なサイズのフレームのすべてのこの。きちんとあなたの配線を維持するために統合された配電盤が付属しています。 5V 3A BECプラスXT60内蔵のバッテリコネクタは、この中に含まれます。

これは、アセンブリおよび位置合わせを支援するために事前にネジ付きスリーブを持つすべての主要な部分を有するフレームを構築することは容易です。いいえ階のものをセルフロックナットを探していません。向きを助けるために昼と夜の両方にあなたが正しい方向に進んで得るのを助けるために、各レッグのストリップが導かれます。

ガラス繊維アームは、あなたが10から12インチのプロペラを実行できるようになります16、19と25ミリメートルモーターの穴が付いています。右上がりの腕は、プラットフォームに大きな安定性を与えるのを助けます。調整可能なバッテリーとカメラジンバルマウントは、あなたが完全に重量配分を調整できます。別のジンバルを容易フレームに取り付けることができます。

適切な価格で優れたユニバーサルフレーム。ちょうどあなたのギアに合わせて、あなたは簡単にあなたの次のドラマを撮影することがあります。

特徴:
•高品質のガラス繊維とポリアミドナイロンから構築
•すべてのフレームのボルト用の真鍮製のスリーブを事前スレッド
安定性のための•上向きに反っアーム
オリエンテーションのための各アーム上の•スーパー輝度LED
•お使いのESCの直接はんだ付けのための統合されたPCBの接続
•簡単な組み立て
•内蔵XT60バッテリ入力用に

仕様:
ホイールベース:480ミリメートル
身長:190ミリメートル
重量:(BEC及び照明システムを含む)510グラム
BECの入力電圧:8〜28V
BEC出力:5V 3A
モーター取付ボルト穴:16〜19〜25ミリメートル

含まれるもの:
1×SKライトニング480フレームキット
1×マニュアル

必須:
4×28ミリメートル800〜1000KVモーター
4×20〜30Aスピードコントローラー
4×10-12inchプロペラ
1×2200mAhの3S 11.1V LiPoly電池またはそれ以上に
1×フライトコントローラー
5〜6チャネル無線機と受信機
カメラとジンバル(オプション)

  • 単位 426000039-0
  • Brand -
  • 容量(mAh ) -
  • 重量(g ) 931.00
  • 長さ 285.00
  • Width 55.00
  • 高さ 200.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Loved the integrated nature of the electronics, but the SK Lightning is a bit fragile and there are NO SPARE PARTS! Broke an arm on the first crash and now I have a useless frame because I can't get a replacement.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Loved the integrated nature of the electronics, but the SK Lightning is a bit fragile and there are NO SPARE PARTS! Broke an arm on the first crash and now I have a useless frame because I can't get a replacement.

These frames have lots of nice features, but there are some deficiencies.
1. The landing gear legs are VERY fragile. Even a minimally hard landing, especially if the vehicle is drifting at all, they fracture at the notch adjacent to their mounting plate. Fortunately, replacements are available at minimal cost (spare S500 landing gear legs), but they still break too easily. I tried reinforcing the upper surface across the notch by gluing carbon fiber strips with both epoxy and CA, but they didn't stick, even though I roughed up the upper surface of the leg with sandpaper. Plan B is to wrap the upper 4 cm of each leg with 2 oz fiberglass adhered with CA, so I'll see how that works as soon as today's snow melts and the wind dies down.
2. The capacitors on the bottom of the LED and power distribution boards are attached only by their connecting wires, so they dangle below the lower deck. The fix for this is easier with hot melt glue.
3 The translucent covers for the LED strips seem to be pretty brittle. Two of mine fractured. I don't know when it happened, but my quad hasn't had any bad crashes, and they shouldn't break with hard landings or simple tip overs.
Otherwise, the kit goes together well and everything else works

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These frames have lots of nice features, but there are some deficiencies.
1. The landing gear legs are VERY fragile. Even a minimally hard landing, especially if the vehicle is drifting at all, they fracture at the notch adjacent to their mounting plate. Fortunately, replacements are available at minimal cost (spare S500 landing gear legs), but they still break too easily. I tried reinforcing the upper surface across the notch by gluing carbon fiber strips with both epoxy and CA, but they didn't stick, even though I roughed up the upper surface of the leg with sandpaper. Plan B is to wrap the upper 4 cm of each leg with 2 oz fiberglass adhered with CA, so I'll see how that works as soon as today's snow melts and the wind dies down.
2. The capacitors on the bottom of the LED and power distribution boards are attached only by their connecting wires, so they dangle below the lower deck. The fix for this is easier with hot melt glue.
3 The translucent covers for the LED strips seem to be pretty brittle. Two of mine fractured. I don't know when it happened, but my quad hasn't had any bad crashes, and they shouldn't break with hard landings or simple tip overs.
Otherwise, the kit goes together well and everything else works

I highly recommended this product, you can't go wrong for the price. Overall quality is excellent and the parts should stand up to some abuse. The assembly instructions are easy to follow and everything went together without any problems. The electronic components incorporated in the frame are of high quality and worked as stated. The LED strips in each arm are very bright and are adjustable via a push button.

ONLY CON - I just wish HobbyKing would provide spare parts for this kit , which is a bit of a worry.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I highly recommended this product, you can't go wrong for the price. Overall quality is excellent and the parts should stand up to some abuse. The assembly instructions are easy to follow and everything went together without any problems. The electronic components incorporated in the frame are of high quality and worked as stated. The LED strips in each arm are very bright and are adjustable via a push button.

ONLY CON - I just wish HobbyKing would provide spare parts for this kit , which is a bit of a worry.

Customer files
Frame manual diagrams Download [51]
Main board Download [247]
Kit parts Download [227]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save