新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • USA
  • Global

SK450デッド猫「除細動器」電源およびA / V配電盤とパワーシールド

SK450デッド猫「除細動器」電源およびA / V配電盤とパワーシールド

QTY:

Now save save AU$0.00 AU$0.00

AU$39.09
Stock:
重量:
463 g
SKU:
9171000236

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
商品概要

私たちは、除細動器を引き出して死んだ猫への変換にはいくつかの深刻な人生に衝撃を与えました!スパイダースタイルクアッドコプターは既にプロペラ無料FPVビューのために最適化されたアーム角度やレイアウトで最高でした。そして今、統合された電源およびA / V配電盤に待望の進行及びシールド電源に接続します。

新しい下部基板は、直接ケーブル接続を最小限に抑えるために、バッテリの上に位置するパッド」の「右腕と電力のベースにモーターESC電力線のための直接はんだパッドを持っています。そこ電源コネクタの背面、前面にあり、あなたのFPVギアとフライトコントローラの真ん中は、すべての電源シールドに縛られる難なく電源の規制、濾過し、RFノイズは、カメラとフライトコントローラのなんと3アンペアで5ボルトをシールドし、ビデオ送信機のhungriestため1アンペアで12ボルト。正面と背面のビデオコネクタはまた、唯一の電圧を供給していないだけでなく、後部に取り付けられたビデオ送信機にフロントマウントされたカメラからのオーディオおよびビデオ信号を運びます。このアップグレードは、あなたの体重を保存して、レイアウトをクリーンアップし、接続障害を減らすことによって、信頼性を向上します。私はこのデッド猫はすべての後に9命を持っていると思います!

特徴:
•統合電源分配
•ウィックスタイルの半田パッド
•カメラとビデオトランスミッター統合配線
•3または4セル入力
RFノイズプロテクションシールド付き•SMPSコンバータ
•サーマル保護

仕様:
入力電圧:8-16v(3-4セルlipoly)
重量:142グラム
出力:5V / 3Aおよび12V / 1A

* SK450は、以下の関連Sk450フレームやデッド猫の変換を必要とするために死んだ猫の除細動器の変換に注意してください。

Product
Specifications

追加情報

  • 単位:
    9171000236
  • Brand:
    いいえ
  • 容量(mAh )
    いいえ
  • 重量(g )
    463.00
  • 長さ:
    375.00
  • Width:
    30.00
  • 高さ
    215.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I am completely happy with this, what a great product! This did wonders to clean my quad up! Some sort of schematic would have been nice however a quick check with my DVOM and I was off and running! This is a must have for the Deadcat frame!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great thing, saves a lot of cables

and makes it look cleaner
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a must for your dead cat upgrade

making the whole upgrade look the bees knees
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fairly straightforward but I wish it came with documentation on what each connector does.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I was hoping this board would make the addition of a camera and Vtx easy and quick. Not so.

The connectors on the board are male 4 contact connections. It is very difficult to find female 4 contact connectors. I tried using 3 conductor female servo connectors without the outer sleeve. When installed there is not enough room for these connectors on the controller and battery connector and the connector will hit the top board.

The best solution is to remove all of these connectors and install header pins. Once this is done standard male servo connectors can be used. The 4th pin is for audio, which I did not use so the 3 pin connectors would work.

Somewhat disappointed as this created a lot more work than should have been necessary.

If the board would have had header pins. I would give 5 stars.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this is a great idea, too bad it will be useless if they ban fpv
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So a friend and I are building dead cats. His is built and flying and after a hard landing the copper band for his ground circuit going to the defibrillator cracked and started pealing off. My frame hasn't been build because my filtered 12v to my video TX is shorted to ground out of the box. .......Not to mention his was nose heavy with a go pro 3 and a 3300mah 3 cell. So I ordered a 4000mah 3 cell because I have a heavier go pro 2 and ccd board cam for fpv but then ran into my electrical short when pinning out the board. I had high hopes for the dead cat but am having second thoughts now for sure.
Cheap lower defibrillator board.
Nose heave with a go pro sized camera. (With 3300mah)
Arms flex

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I had bigger hopes for this. You have 5V in the front and 12V in the back and a just one extra pin intended for video between front and back. I would like to see both 5V and 12V front and back and some extra pins that I could use for whatever.



The defibrillator seems to output 10V on the 12V pin based on just a quick test with 3S.



Also note that the pins are FEMALE for everything. If they where male we could use the extra servo cables we have...



Connecting a Tarot 2D gimbal to this needs hacking. The defibrillator is in the way and the provided holes are not suitable for the Tarot. I opted to add a separate plate in between the deadcat and gimbal.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Totally agree, the idea is good, like the Black Sheep TBS Discovery product, but the difference is they give you hook-up pins and connectors. HK, at least give us a reference or source to find the pins we need. Come on HK, you have a good concept, follow it through and give your customers a complete product.......after all you require us to buy three different kits to get "one".
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Dead Cat PCB Board

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。