New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

スカイウォーカー1680 V6 FPVプラットフォームEPOキット

スカイウォーカー1680 V6 FPVプラットフォームEPOキット

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
重量:
2340 g
SKU:
304000001
WANT FREE SHIPPING? Click here to find out more!

これは、スカイウォーカー技術から最新の「1680」です。

スカイウォーカー1680 V6は、特別FPVシステム用に設計されています。グライダーは、それが比較的安全クラッシュ作り、耐久性EPO発泡体から構築されます。構築するシンプルで内部の機器空間の膨大な量で、 '1680'はFPV'ersの間で人気です。それは、それのサイズのため、比較的軽量の機体であり、全体に優れた実用的な設計機能を備えています。以下のような:T-尾設計、外部FPVトランスミッタプラットフォーム、整列を保証ラグの位置を胴体するウイング、カーボン胴体&翼は、それが必要なのどこに剛性を追加するためにスパー。

機体を使用すると、選択した機器とそれをフィットすることができ、唯一のキットとして供給されています。

仕様:
翼幅:1680ミリメートル
長さ:1180ミリメートル
キャビンサイズ:172ミリメートルX 280ミリメートルX 60ミリメートル
フライング重量:1300グラム- 1800グラム

必要なもの:
バッテリー:2200-5000mAh 3S-4Sリポバッテリー
モーター:SK3 3536 920から1200 KVのアウトランナー
プロペラ:9x4 - 9x6
ESC:40A
ラジオ:4×9グラムサーボと4chの

  • 単位 304000001
  • Brand -
  • 容量(mAh ) -
  • 重量(g ) 2340.00
  • 長さ 1190.00
  • Width 195.00
  • 高さ 295.00
  • Skywalker FPV
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Have been flying this plane for a couple of months now. The gear - Turnigy Park480/1320kV motor, APC-clone 8x6 prop, 45A ESC, 5000/3S/25c LiPo, 12g metal gear servo's on ailerons and 10g plastic servo's on tail. There is a OrangeRX R800X and 2 R110XL receivers (6 antenna should be enough I think). The FPV gear is a 600tvl camera on a pan mount, and transmits through a 200mW 5.8Ghz unit with a cloverleaf. The remaining FPV gear is EagleTree. Flying weight is 1850gm. The Park480 motor is a little small for this size aircraft, but I get good efficiency (90W cruise at 50~55kmh). On a calm day it will give me 20 minute flights from 75pcnt discharge of the battery. The V6 wing isn't as rigid as earlier versions; I removed all the CF tube and replaced with 2.5mm GF rod glued in channels across top and bottom, making the wing one piece. Lots of other mods, see the files tab for build pics.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have been flying this plane for a couple of months now. The gear - Turnigy Park480/1320kV motor, APC-clone 8x6 prop, 45A ESC, 5000/3S/25c LiPo, 12g metal gear servo's on ailerons and 10g plastic servo's on tail. There is a OrangeRX R800X and 2 R110XL receivers (6 antenna should be enough I think). The FPV gear is a 600tvl camera on a pan mount, and transmits through a 200mW 5.8Ghz unit with a cloverleaf. The remaining FPV gear is EagleTree. Flying weight is 1850gm. The Park480 motor is a little small for this size aircraft, but I get good efficiency (90W cruise at 50~55kmh). On a calm day it will give me 20 minute flights from 75pcnt discharge of the battery. The V6 wing isn't as rigid as earlier versions; I removed all the CF tube and replaced with 2.5mm GF rod glued in channels across top and bottom, making the wing one piece. Lots of other mods, see the files tab for build pics.

Love my V6 Skywalker. Wish i can buy a second one for backup !
Hear lot of people said this V6 is better than the new V7

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love my V6 Skywalker. Wish i can buy a second one for backup !
Hear lot of people said this V6 is better than the new V7

this is my seventh skywalker. the simple fact is, the 1680 is the one, the only FPV plane to have!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this is my seventh skywalker. the simple fact is, the 1680 is the one, the only FPV plane to have!!

This is my 3th Skywalker. I love this plane. it's easy to fly and stable. and with the right setup you have about 18 minutes of flight with your GoPro onboard as well

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my 3th Skywalker. I love this plane. it's easy to fly and stable. and with the right setup you have about 18 minutes of flight with your GoPro onboard as well

Enormous space for fpv equipment!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Enormous space for fpv equipment!

Perfect for fpv, tons of room for all your equipment

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect for fpv, tons of room for all your equipment

I don't think I can say much that others haven't already said. It's a Skywalker. Well known as a fantastic FPV plane.



I am pleased to see so much carbon. Some already in the wings. Plus a nice thick and long joining rod. I can't see it snapping. There's another in the tail and a strip for the elevator.



It comes in 2 halves, which I like. This gives me every chance to make my mods. I'll be putting a bit more carbon here and there around the rudder and anywhere else that looks weak.



It came a bit battered. Not enough for me to send it back. But, enough to make me wonder how it happened. It was very well packed.



It has long gouges on one side. It looks like someone has drawn lines down it will a carbon rod. Not too bad... But they're there.



Still, I'm happy. If I'd seen it I'd still have bought it. And after I've built it and covered it... It won't look much like it does now.



I realise that I should fly it before I write about it. But, it looks just like the older versions and they fly well. There are changes. Nothing drastic.



I am happy to have my new Skywalker:-)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I don't think I can say much that others haven't already said. It's a Skywalker. Well known as a fantastic FPV plane.



I am pleased to see so much carbon. Some already in the wings. Plus a nice thick and long joining rod. I can't see it snapping. There's another in the tail and a strip for the elevator.



It comes in 2 halves, which I like. This gives me every chance to make my mods. I'll be putting a bit more carbon here and there around the rudder and anywhere else that looks weak.



It came a bit battered. Not enough for me to send it back. But, enough to make me wonder how it happened. It was very well packed.



It has long gouges on one side. It looks like someone has drawn lines down it will a carbon rod. Not too bad... But they're there.



Still, I'm happy. If I'd seen it I'd still have bought it. And after I've built it and covered it... It won't look much like it does now.



I realise that I should fly it before I write about it. But, it looks just like the older versions and they fly well. There are changes. Nothing drastic.



I am happy to have my new Skywalker:-)

This plane fly like a bird, i did no need of trimming at all, fast build about 2 hours, it need a lot of weight in the nose, i did a fly with 4000mha 4S Lipo but nose was not heavy enough, i add one additional battery ( 3000mha 3S not connected just for the use of weight) on the top of the connected one and still not enough weight, i than install the GoPro 2 camera with the protection case, and BINGO it fly alone.
I was in love with my EPP-FPV i have to say a new love arrived.
in conclusion i was worry about the previous tale comments in discussion but nothing to worry about, and will handle the weight of the FPV equipment without problem, easy to carry around, i will advise this plane to any one even beginners really easy to fly, the foam wing is not the best quality but can be solved with fiber tape, at the price can't find better, thank's HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane fly like a bird, i did no need of trimming at all, fast build about 2 hours, it need a lot of weight in the nose, i did a fly with 4000mha 4S Lipo but nose was not heavy enough, i add one additional battery ( 3000mha 3S not connected just for the use of weight) on the top of the connected one and still not enough weight, i than install the GoPro 2 camera with the protection case, and BINGO it fly alone.
I was in love with my EPP-FPV i have to say a new love arrived.
in conclusion i was worry about the previous tale comments in discussion but nothing to worry about, and will handle the weight of the FPV equipment without problem, easy to carry around, i will advise this plane to any one even beginners really easy to fly, the foam wing is not the best quality but can be solved with fiber tape, at the price can't find better, thank's HK.

Customer files
Manual - Skywalker 1680 V6 FPV Platform Download [5066]
No File Name Download [5051]
VOG Skywalker V6 001 Download [57]
VOG Skywalker V6 002 Download [35]
VOG Skywalker V6 003 Download [39]
VOG Skywalker V6 004 Download [45]
VOG Skywalker V6 005 Download [68]
VOG Skywalker V6 006 Download [46]
VOG Skywalker V6 007 Download [44]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save