新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

スカイウォーカーファルコンフライングウィングARF EPO1340mm

スカイウォーカーファルコンフライングウィングARF EPO1340mm

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
1593 g
SKU:
304000002

Combine

essential items and
esc
battery
motor
商品概要

スカイウォーカーファルコンは、超耐久性のあるEPOから構築さ1340ミリメートルスパン飛ぶグライダーです。このモデルは、あなたが望むしかし、あなたが機体をフィットすることを可能にするキットの形で供給されています。

理想的に設計されており、フラットフィールド飛行用のブラシレスアウトランナープッシャー電源システムに適しています。ミニFPV明確な可能性作る天蓋の下のスペースがたくさんあり​​ます。翼と斜面に優しいEPOを介して3個の炭素スパーにたくさんの強さのおかげで - ファルコンはまた、非常に耐久性の傾き高騰モデルを倍増します。

ファルコンは、ボックスの多くを刻みます!電気配慮した設計上の考慮事項を搭載。このような外部ESCとして冷却空気流へのESCを露出するようにマウントし、ケーブル配線に成形しました。トップに取り付けられサーボが地面から制御結合を維持し、ラフな着陸エリアにストリッピングサーボを防ぎます。

ビルとフィットアウトは非常に迅速かつ簡単です。フィンと翼に乗ってわずか数媒質CAジョイントを必要とします。それからちょうどあなたのラジオや電源システムを追加し、設定は完了です!でもデカールはあなたのために事前に適用されます!


スペック
ウイングスパン:1340ミリメートル
全長:620ミリメートル
モーター:2208 2215サイズ、1800 2200kvへ
バッテリー:3S 1500 - 2200mAhのリポ3S
プロペラ:5x5-6x4
重さ:510グラム

含まれています:
説明書
ハードウェア
サーボ延長のリード
プライモーターマウント
キャノピーマグネット

必要なもの:
デルタミキシングを使用して独自の4チャンネルTX / RX
1500mAh〜2200mAhの3S Lipolyバッテリー
2×9グラムサーボ
22/28 1800kv +ブラシレスアウトランナーモーター
20A〜30A ESCワット/ BEC
6X4プロップ

Product
Specifications

追加情報

  • 単位:
    304000002
  • Brand:
    N/A
  • 容量(mAh )
    いいえ
  • 重量(g )
    1593.00
  • 長さ:
    680.00
  • Width:
    180.00
  • 高さ
    345.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This model is great! Easy to build, easy to fly, it can go super fast or just cruise around with a 1000kv motor.

Best 30 bucks I've ever spent!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Easy to build - I am using it as a second FPV plane. Very light and easy to launch. Can fly very slowly which is important if you fly close to ground. The cover is lost when flying fast - the magnets aren't strong enough. However - it's not needed for flying and cooling is now better :-) If CG is right it's a great deal for no money!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great wing, easy to build and quality is not bad either. Just add more or better magnets to the canopy or you will lose it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
4 stars because its cheap, however beware. The decals are NOT pre applied, There is NO manual provided, the Canopy on mine is Black NOT clear. The supplied glue is rubbish and needs 12h to set so recommend you use your own. Otherwise its great value for money!

Suggest HK update the product details to not provide a false expectation
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great plane, glides very well, can carry a load, can be easily modded for FPV although room can run out quickly, so light OSD, 3000mah 3s, sorted!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A very nice little wing that goes together easily, although the fit of some of the parts could be better. I set it up with a 1200kv 2826 NTM motor, 30a speedy, a 3s 2200Mah 20c Zippy and 8x6 APC prop. Flies very well but it's certainly no missile, especially with that lazy motor, but it will give 30 min flights with ease. Could be just the thing for long range FPV flights. Hand launch is a little difficult, especially in wind as there isn't much to hold on to with you fingers underneath the fuselage. CG is at 300mm and seems about right. It will cruise around easily at half throttle and is exceptionally smooth and stable and tracks well in the air but care must be taken not to fly too slowly as the stall is very sudden and the resulting spin is vicious and does take some altitude to recover from.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great flying model.good glide ratio,very stable and fast. painted it looks better.Balanced and so stable. I run a Turnigy 2836/8 1100 Kv
motor and a 9x6 prop giving 200 watts but she will fly on half throttle so a good buy.

http://youtu.be/YDT6mXMOhXk
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
BEST plane I've got! and I have a few, This is my second falcon, I was so impressed with the first which I use nearly daily that I decided to get a second to try a different setup, I might put wheels on it? what do you reckon
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi easy to build ,super price,I bulit an impeller on the tail (siehe files)end and she flies straight like an arrow glides also really well, for this price you cant go wrong and she is really durable ,Im having lots of fun with this one especially with 50mm EDV a must buy, canopy! you have to screw it down magnets are just not enough.
PB
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Size is not too big nor to small. Just nice to train up on wings before I get the darkwing.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Skywalker Falcon

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
motor

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。