新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global
  • USA

小さなボルトブラシレスツインハルR / Cボート(385ミリメートル)

小さなボルトブラシレスツインハルR / Cボート(385ミリメートル)

QTY:

Now save save AU$0.00 AU$0.00

AU$127.47
Stock:
重量:
869 g
SKU:
HK-Bolt

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要
このブラシレスツイン船体ボートは小さいかもしれないが、それは非常に強力だと非常に高いトップスピードに到達することができます!
ボルトツイン船体R / Cボートは、強力な2604kv水冷ブラシレスモータ、ステアリングサーボとすべてのハードウェアが付属しています。
すべての品質のハードウェアが含まれており、ビーズブラストで仕上げや腐食を防止するために陽極酸化し、十分に機械加工されています。
スペック。
長さ:385ミリメートル
:180ミリメートル
身長:60ミリメートル
重さ:430グラム
モーター:20-40サイズ2604kv水冷brusless
ESC:30Aの水冷(必須)
サーボ:1×ミニサーボ
必須。
無線システム(2chの)&レシーバー
11.1V 3S 20Cリポ
30A水冷ESC
*すぐに到着スペアパーツ。
Product
Specifications

追加情報

  • 単位:
    HK-Bolt
  • Brand:
    N/A
  • 重量(g )
    869.00
  • 長さ
    470.00
  • Width:
    100.00
  • 高さ:
    215.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Awesome Quality and price.

Well packaged and no issues with servo yet. Just make sure the rubber boot doesn't bind up the servo as it's small and any excess friction will kill it. Screams on 4s.
Quality
Value
Overall
Quality
Value
Overall
Nice little boat. Remember to tighten all the screws and use nail polish or a threadlocker to avoid unwanted flying (sinking?) screws and/or pieces. You may also want to solder the tip of the flex shaft (where you tighten the grub screw of the coupler): doing this can prevent the unravelling of the flex shaft. To put out the flex shaft you have to remove the drive dog and the strut from the strut mount. The cooling jacket should have the inlet tube towards the lower part of the motor so the jacket will be filled with water before any water comes out.
Quality
Value
Overall
Quality
Value
Overall
Trs bon petit bateau pour dbuter.
J'y ai ajout un contrleur Tunrigy marine 35A et mon systme de radio (qui ne son pas inclus dans ce modle ARR "presque prt l'emploi").

Attention pour les batteries en 3s, maximum 2200mAh, au dela ca ne rentre pas, d'autant qu'il y a trs peu d'espace lintrieur du small bolt.

Le miens prend un peu l'eau ce qui est agaant pour un modle ARR, il faut imprativement prvoir du matriel rsistant l'eau.
En cas de retournement, le small bolt est difficile ramener, il tourne sur lui mme (ou alors je n'ai pas encore la technique^^).
Prvoir une canne pche, un short de bain ou un bateau de secours.
Quality
Value
Overall
Quality
Value
Overall
Very good fast boat the only disappointing thing is the sealing around the motor when i got mine I tested it for leaks in our bath and behold it was nearly half full of water within a minute or two ( i left thinking it would take a long time to leak)
But I also think that hobbyking should include esc.
But once I fixed these minor things It works well
Quality
Value
Overall
Quality
Value
Overall
boat came with missing ESC, antenna has no hole thus cant mount... contact customer support, then was ignored for about a week then contact again still no luck. its not worth the hassel so i ordered another ESC... makes it unfair and hard to trust for my next order, makes me wonder what my next order is going to be???????????????????
Quality
Value
Overall
Quality
Value
Overall
I have just received my small bolt, there is no ESC inside despite they said under their spec the ESC is include also on the antenna side there is no hole for me to plug in the antenna. Am i supposed to drill a hole myself? not happy
Quality
Value
Overall
Quality
Value
Overall
Real good deal, before you start, be sure you have sufficient space this ship feel god on larger areas. I use with 2200mAh, good run time not prone to jumping, but if you try to slow down boat has been momentaly submerged (always use sealing tape!). I try 1600mAh 30c and all appears much better, minimum submersion, ship is bit more lively (no "submarine" starts), it is necessary to to drive sensitive. Of course, run time goes down to 5-7min.
Two crown for quality down my boat arrive without ESC.
Quality
Value
Overall
Quality
Value
Overall
Ok!!! The missing ESC was applied as credit to my account for a
TR-M-35A ESC and I purchased it today. Although I had to pay $7.00 more in shipping I'm still happy with the excellent customer service. I'll follow up with a run report after I get the new ESC.
Quality
Value
Overall
Quality
Value
Overall
First run with a 35amp esc, a 2200 3s 20c lipo and an octura x432 prop, I have no heating issues what so ever, Quite a quick little boat for its size, after a few more runs the battery started to improve performance wise. Future plans for this boat is to put a 36 size 3900kv motor, 50amp birdie esc and a 35c 2100 zippy 3s battery. Hopefully I will see some speed improvements with that setup but for a beginner you cannot go wrong or go past a price like that! :)
Quality
Value
Overall
Quality
Value
Overall
Hab das SmallBolt seit einem Jahr und ziemlich viel damit rumexperimentiert mit dem Ziel soviel Speed wie mglich rauszuholen.

Ich habe den Original Motor gegen einen Walkera 380S WK-WS-28-003 (3100kV, Durchm. 37mm, Lnge 51mm) getauscht, der wesentlich mehr Bums hat. Den passenden Khlmantel gibt es von Gundert. Wellenkupplung habe ich zunchst aufgebohrt, spter gegen eine von MHZ ersetzt.

Als Propeller nutze ich die Hobbyking Prop. Nylon 1.4x32.

Als Regler nutze ich den Turnigy 60A Marine Regler, nachdem mir ein 45A Scorpion Regler abgeraucht ist.

Die original Abdeckung ist mir kaputt gegangen, bei dem Versuch sie nachzuformen weil die hinteren Ecken soweit aufgestanden sind, dass man sie nicht richtig abdichten konnte.

Am Rumpf habe ich das Heck von innen mit 5Min Epoxy nachtrglich verstrkt. Dabei verschwand auch gleich die Antennenffnung. Das Stevenrohr wurde mit Stabilit nachgeklebt.
Der bergang vom Messingrohr zum Strut wurde, wie hier schon einige male beschrieben mit Schrumpfschlauch abgedichtet.
Weiteres verstrken war nicht notwendig. Nach ca. 20 Akkus sind keine Risse oder Undichtigkeiten erkennbar.

Die Schrauben (Ruder/Strut) habe ich alle gegen Edelstahlschrauben mit Linsenkopf getauscht.

Als Akku nutze ich 3s 2200mA Turnigy mit 35c.

Fahrzeit betrgt ca. 5 bis 10 Minuten. Zur Probe wurde ein Akku n
Quality
Value
Overall
View all reviews
Upload
Videos
  • Small Bolt Brushless Twin-Hull R/C Boat

  • next race Matts weed cutting

Upload video
Upload
Files

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。