新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global

ソロPRO 180 3Gフライバーレス3Dマイクロヘリコプター - イエロー(AUSプラグ)(RTF)

ソロPRO 180 3Gフライバーレス3Dマイクロヘリコプター - イエロー(AUSプラグ)(RTF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
1660 g
SKU:
NE30231824102

Combine

essential items and
battery
商品概要

ソロプロ180 3Gフライバーレス3Dマイクロヘリコプターが到着しました!これは、喜ばせるために確信しているフライバーレスコレクティブピッチ3Dマイクロヘリコプターです。唯一の105グラム飛行重量の重さ、これは一つの小さなまだ非常に可能なヘリです!

そのブラシレスメインモータ、高品質のフライバーレスシステム、およびシャフト駆動テールで、ソロPRO 180は、全く新しいレベルに3Dマイクロヘリコプターを取ります。シャフトドライブテールはロックでは、市場で他のマイクロヘリの追随を許さないと感じています。このマシンは本当にはるかに大きいヘリのように飛びます!

J6 PRO 6CH 2.4GHzの無線機もこのパッケージに含まれています。これは、このような、やのような多くの優れた機能を持つソロProの100のような他のソロProのヘリとの結合を可能にする高品質のラジオです。

モデルタイプの選択
反転チャンネル
デュアル料金
CCPMミックスのセットアップ
スワッシュプレートタイプ
一般ウイングミックス
調整可能なスロットル/ピッチカーブ
ジャイロ感度調整
スロットルホールド機能
メモリトリム
送信パワー
モード1またはモード2の選択急が(無線機の背面にあります)


このパッケージには含まれJ6 PRO 6CH 2.4GHzの無線、可変レートバッテリー充電器、および3.7V 680mAhのlipolyで飛行する準備ができています。フライトバッテリーを充電し、あなたが飛行する準備が整いました!


スペック。
ローター直径:12.52 "(318ミリメートル)
全長:14.17 "(360ミリメートル)
重量:3.7オンス(105グラム)
バッテリー:3.7V 680mAh lipoly
無線タイプ: モード1またはモード2(無線機の背面に急がせることにより、ユーザが選択可能)

*このバージョンでは、AUSの充電器の電源プラグが付属しています

Product
Specifications

追加情報

  • 単位:
    NE30231824102
  • Brand:
    N/A
  • 容量(mAh )
    いいえ
  • 重量(g )
    1660.00
  • 長さ:
    346.00
  • Width:
    193.00
  • 高さ
    246.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
As a newcomer to the hobby/sport I bought the Solo Pro 180 3G because I thought it would be less intimidating than anything larger such as Trex 450/500. Out of the box, the Solo Pro 180 is a little feisty for the beginner such as myself. After a few minor crashes (and minor repairs), I decided to tame this little beast! To start with, the Pitch Curve in normal mode was flat at /- 15 degrees or more! If you're a beginner try something like 45-50-55-60-65 for pitch. This I found was more than enough perhaps -5/ 10 degrees. Also a Throttle Curve of 0-20-40-60-75 gave a hover a little over mid stick and a 6 minute flight. With the Pitch & Throttle set like this I was able to lift off quickly without the Heli tilting to one side! I also set the D/R normal rate to 80pcnt for all axis and set the Ail/Ele expo curves to -50E and Rudd at 00E. These settings worked great for me but experiment for yourself. I gave 3 stars for Value because spare parts can add up quickly and 4 stars for quality because some parts are not very robust! If you want to save on repairs for this little Heli, "Don't fly it"!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
As a relatively newcomer to the hobby/sport I bought the Solo Pro 180 3G because I thought it would be less intimidating than anything larger such as Trex 450/500. Plus my Solo Pro 260A turns one way better than the other! OK, out of the box, the Solo Pro 180 is a little feisty for the beginner such as myself. After a few minor crashes (and minor repairs), I decided to tame this little beast! To start with, the Pitch Curve in normal mode was at least /- 15 degrees or more! If you're a beginner try something like 45 - 50 - 55 - 60 - 65 for pitch. This I found was more than enough perhaps -5/ 10 degrees. Also a Throttle Curve of 0 - 20 - 40 - 60 - 75 gave a hover a little over mid stick and gave me a 6 minute flight. With the Pitch and Throttle set like this I was able to lift off reasonably quickly without the Heli tilting to one side! I also set the normal rate sensitivity to 80pcnt for all axis and set the Ail/Ele curves to -50E and left Rudd at 00E. This worked great for me but feel free to experiment for yourself and enjoy this little gem. I gave 3 stars for Value because spare parts can add up quickly and 4 stars for Quality because some parts are not very robust! If you want to save on repairs for this little Heli, "Don't fly it"!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
As a relatively newcomer to the hobby/sport I bought the Solo Pro 180 3G because I thought it would be less intimidating than anything larger such as Trex 450/500. Plus my Solo Pro 260A turns one way better than the other! OK, out of the box, the Solo Pro 180 is a little feisty for the beginner such as myself. After a few minor crashes (and minor repairs), I decided to tame this little beast! To start with, the Pitch Curve in normal mode was at least /- 15 degrees or more! If you're a beginner try something like 45 - 50 - 55 - 60 - 65 for pitch. This I found was more than enough perhaps -5/ 10 degrees. Also a Throttle Curve of 0 - 20 - 40 - 60 - 75 gave a hover a little over mid stick and gave me a 6 minute flight. With the Pitch and Throttle set like this I was able to lift off reasonably quickly without the Heli tilting to one side! I also set the normal rate sensitivity to 80pcnt for all axis and set the Ail/Ele curves to -50E and left Rudd at 00E. This worked great for me but feel free to experiment for yourself and enjoy this little gem. I gave 3 stars for Value because spare parts can add up quickly and 4 stars for Quality because some parts are not very robust! If you want to save on repairs for this little Heli, "Don't fly it"!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
As a relatively newcomer to the hobby/sport I bought the Solo Pro 180 3G because I thought it would be less intimidating than anything larger such as Trex 450/500. Plus my Solo Pro 260A turns one way better than the other! OK, out of the box, the Solo Pro 180 is a little feisty for the beginner such as myself. After a few minor crashes (and minor repairs), I decided to tame this little beast! To start with, the Pitch Curve in normal mode was at least /- 15 degrees or more! If you're a beginner try something like 45 - 50 - 55 - 60 - 65 for pitch. This I found was more than enough perhaps -5/ 10 degrees. Also a Throttle Curve of 0 - 20 - 40 - 60 - 75 gave a hover a little over mid stick and gave me a 6 minute flight. With the Pitch and Throttle set like this I was able to lift off reasonably quickly without the Heli tilting to one side! I also set the normal rate sensitivity to 80pcnt for all axis and set the Ail/Ele curves to -50E and left Rudd at 00E. This worked great for me but feel free to experiment for yourself and enjoy this little gem. I gave 3 stars for Value because spare parts can add up quickly and 4 stars for Quality because some parts are not very robust! If you want to save on repairs for this little Heli, "Don't fly it"!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good idea but poorly implemented. Flies ok after proper setup but incredibly fragile and the slightest bump bends and breaks everything. Spare parts never in stock. Transmitter is a nightmare to program and incompatible with other systems so you're stuck with it, and as it has no model memories it's useless for anything else.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little heli, very twitchy. Found mine to be way out of trim, and the tail rudder was only giving deflection one way.

I also found the swash positioning arm to be out of it's guide.



Make sure you do a thorough preflight check. They are not all RTF!



CAUTION: The product manuals included have been manually edited by HobbyKing blanking out all iterations of the Nine Eagles website. This caused damage to the product in my case and HobbyKing will not admit fault.

To add insult to injury, as of writing this HobbyKing has been out of stock of everything for 2-3 weeks now.



If it helps, the HobbyKing listing does seem to mention the mfg. part number so you may be able to find them elsewhere :D
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am disappointed with this helicopter, as others have said it will barely get off the ground out of the box, I am still trying to tune mine to hover without constantly turning in circles. I have moved the tail servo horn back to give the tail more adjustment, and put the servo rod to the centre hole, I tried the outer hole, but then had bad tail wag.
If anyone has had success tuning this heli please help!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is supposed to be set up and ready to fly, it's not, in fact mine doens't fly at all, the set up was completely wrong on the TX and my tail blade shaft is well bent like it's had a prang, but I haven't managed to get it to leave the ground at all and haven't hit anything, so it came like this. The box looked rather second hand and I'm wondering if this was some one elses return! Basically at the moment I think it's a load of crap and a waste of money! Not good enough Hobby King, you've pissed me off this time!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Gear mesh is way too tight. U/c is fragile. Should have used HDPE or PP instead of the brittle polymer used. Radio has no memory for other models. It would be a great toy if Hobby King stocked spare parts. Probably not their fault except that they should have told 9 Eagles that they would only stock this when parts were available. I don't suggest buying this till they get parts.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Delivery and email notices from HobbyKing is 5 Stars. Information was available right from the moment the order was placed till the goods arrived.

Had 260A before this 318 and both has been a wonderful experience.
The price is still a little steep for a micro this size especially when considering shipping cost. Could have gotten more audience if cost somewhere 30pcnt lower.

Manually turn the motor and it is smooth but When spooling up, it has such a jerky action that causes it to turn more than 120 degree yaw before lift off. Could be the effect from the Torque Tube. Heli tense to lean too much to the right during lift off and tail blades strike the ground too often due to the tilt and long tail blades.

Quality is premium for the heli but the looks of the transmitter needs a different liking, much similar to the feeling one's has with their 4ch transmitter.

Finally, would love to have HobbyKing stock up and makes spare parts available for us to buy. We are looking forward to the 228's due date too.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Solo PRO 180 3G Flybarless 3D Micro Helicopter - Yellow

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

顧客ファイル
Manual part 1 download now [3906kb]
Manual part 2 download now [5011kb]

Combine

essential items and
battery

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。