Spedix S250QカーボンファイバーレーシングドローンCC3DモーターPDB ESCプロペラ/ワット（ARF）

• Overall
• Quality
• Value

Excellent flier; kit went together well; excellent value on Spedix S250Q racing quad.

Apr 07, 2018

I bought this during the warehouse sale. ARF is a bit of a misnomer, as it is no where near Almost Ready to Fly. It's a kit. It took me about 5 hours to assemble and program. I was a little worried when I discovered that OpenPilot is GONE (the interface for the CC3D board included with the kit. LibrePilot has replaced OpenPilot. I had to flash the board with new firmware. No problem doing the flash. When the flash was done the board the the software coexisted peacefully. The "instructions" are VERY minimal. I do have one gripe...the "instructions" show motor #1 with a CCW prop...so that was the key to the way I set up the quad. When it lifted off, it whirled like a dervise on the yaw axis...all of the motor rotations were backwards. Easiest solution was to remove the two front arm assemblies and swap them side to side...then do the same thing with the back two arms. Back outside and this time it flew flawlessly. I have about 1 hours flight time on it now, still on the props that came with it. Plenty of power. Flying on 3s 2200mah. Getting about 15 minutes with gentle flying. I estimate speed to be about 50mph with the 3 cell. Haven't tried a 4 cell yet, but I'm guessing maybe 70mph? Very smooth, steady, and precise in the air. Flying FPV with a Caddx camera and goggles. With the sale price, this provides tremendous bang for the buck. The "regular" price is still a great deal. Start figuring what it would cost to buy 4 motors, 4 ESC's, frame kit, power distribution board, CC3d FC board, props, etc. It would cost you twice what the kit costs. Comes with SunnySky motors which are working very well. As per my usual process, I used loctite on all metal to metal screw connections. NO screws stripped or failed to secure. Some of the button head screws were a sloppy fit with a 1.5mm allen wrench and I had to use a 1/16" wrench instead; minor annoyance. Nothing has vibrated loose. Used tiny drop of elmers white glue to secure the nylon standoffs.

• Overall
• Quality
• Value

Really enjoy flying Spedix S250Q Quad

Apr 04, 2018

Purchased this on sale, wasn't to sure about it from reviews. My experience has been great. I did have some screws that the sockets were different (2.5mm x 10mm) some I used a 2 mm and a 1/16" wrench. I watched videos online to see how to assemble quad and program flight controller. The props that come with it will break very easy. (They are identical to the Gemfan props) I purchased the Dalprops with bull nose and they work very well. Overall I really like it for money I paid. ($41.36)

• Overall
• Quality
• Value

great for beginners with engineering skill, if price is low

Jan 24, 2018

Hi,
i did not plan to become a drone pilot, but I bought it to get free shipping.
It took me quite a while to get it running.
I am using:
- Taranis Q X7
- a XSR-M receiver
- GPS module to geht flight data no the Transmitter
- 3S 2200mAh 30-60C Lipo
My Story:
I finally installed librePilot on my PC, then USB connection worked, flashed it, configured it, used it, crahsed it, fixed it, flight it again, added GPS, more flying.
Negatives:
- QUAlITY could be better. As others wrote, some of the screws are screwd up. But hey, 2 out of 4 are enough to hold it together :D :D
- Carbon frame is very fragile mine broke
- Pylons are heavy plastics
- manual is much too brief
- flight computer did not work out of the box for me
Positives
+ if you got it flying, it is great fun. it got actually some power
+ very cheap => good VALUE
+ very cheap spare parts (frame)
+ programmable flight controller
+ nice LED looks
CONCLUSION:
If you wanna seriously fly races => get some high quality stuff.
If you wanna start doing stuff with drones and you know how to set up things => go for it!
If you need to find something more in your cart to get free hong-kong shipping => go for it!

• Overall
• Quality
• Value

Customer Rated

Jun 28, 2016

All of my screws stripped as-well. I tried multiple different wrench sets on each fresh screw just trying to get a decent snug tight before they would spin loose and strip. (I tried standard wrenchs too but these are made for metric).

On my 5th flight with a fresh battery after a 5 minute break from flying the previous battery I tookoff to test my video range over a lake. In less than a minute of flight time as I was returning to myself, all rotors stopped dead. My CC3D board gave out on the 3rd flight and it plummeted into the lake. Complete loss. I ordered this kit a week ago for $76.99, since then HK has increased the cost to $142.43
A nice little slap on the face to cap off this whole experience. Even though I have a bunch of spare parts I doubt I will ever build a Spedix again.

• Overall
• Quality
• Value

Customer Rated

Jan 10, 2016

every screw i used on the body stripped before even being tight. this is a new level for the disgusting quality of screws hobbyking provide. I installed 1 arm wrong and cannot remove it because these screws have just worm away leaving no groove at all. i don't even know how it is possible and if you spend 500 years in china looking down ever shady shop you will not find worse quality screws.

All hobby flyers know what the importance of good quality parts are and also one of the motor caps were missing so i need to get reverse threaded lock nuts....wonderful