サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

スピーディ複合EPパフォーマンスグライダー1600ミリメートル(ARF)

Generating Links

スピーディ複合EPパフォーマンスグライダー1600ミリメートル(ARF)

価格:

Now save 節約 ¥0.00 ¥0.00

¥13,707.53
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
HK-B002
送料無料したい? クリックする こちらへ 詳細情報を参照する

スピーディあなたは....速度をそれを推測....のために構築されています!うまく複合胴体を作ったプライサーボとバッテリートレイ事前に取り付けられたとの深い光沢仕上げを持って水平尾翼&エレベーターがあるように、取り外し可能な2個の翼はバルサの建設です。

事前製作のハイレベルと組み合わせて、このモデルの単純さはスピーディが本当に組み立てのほとんど関与一部となるパワートレインをフィッティング、クイックビルドであることを意味しています。スピーディはわずか3サーボのを必要とし、一般的な2200mAhの3S Lipoly(含まれていない)上で実行して、構築するために、高価でもあります。

右モータでは、迅速なコンポジット/バルサ、それはまた、今後数年間続く必要があり、それはあなたの腕と脚をコストを持っていないという、高速の楽しみの時間を提供します!実用的で安価なは、多くの場合、高性能モデルに関連付けられている言葉ではありません、スピーディは、ルールの例外です!

仕様:
翼幅:1600ミリメートル
長さ:970ミリメートル
フライング重量:917グラム
ウィングエリア:28dm2
ウイングロード:33グラム/ dm 2で
エアフォイル:RG14

必要なもの:
4チャンネルトランスミッタおよびレシーバ
28ミリメートルブラシレスInrunnerモーター2200kv
3×9グラム〜12グラムサーボ
40A ESC BEC /ワット
35ミリメートル折りたたみプロップスピナー
3S 11.1V 2200mAhのLiPolyバッテリー

  • Speedy
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 12, 2015

Hi, I recived de plane Ok. I have a question for you. I need one 90 degree sma plug (not Rp sma plug) for my radio. When i order that, appears only RP-SMA. How can I order the SMA?

Thanks in advance for your early answer.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 31, 2015

Fantastic model! I've gone with a turnigy 1370kv Inrunner with a 9.5x5 folding prop on 4s (520W). some simple mods required for assembly. It flies brilliantly. My settup gives ample performance but not really a true hotliner. It flies just like a Dynamic S but 30 percent better in every way! (including price) recommended buy.

Micho69 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 16, 2015

rc aircraft fuselage is designed for motor N3536 1200 to 1700 kV. It is wide enough for mount motor. The engine has an ideal weight - need not be buried then undertake forward / center of gravity due to / the elevator servo is better to use 19 g. is stronger and place it ought not to tail but the more forward / also because the center of gravity. The hole for the tail servo must seal and into the elevator back to stretch the liner. The body is too fat,,,, for 28 mm motor and has a very heavy tail.

robson_silva | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 14, 2014

Para ficar com o cg equilibrado precisou de 513 gramas de lastro no nariz, o modelo bem feito, mas peca por ter muito peso de cauda.

RTom1 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 28, 2014

Compared to my buddy's "GL-Speedy Fiber Glass Hotliner" mine (this one ) is much more durable (use of plywood reinforcements inside of fuselage also aft of wings, wing joiner made of GFK instead of ply, better servo covers and some more). And all for about GBP12,- less than that one!
But still there is a bit of work to be done to make it a real hotliner (if possible at all)...

Drgsi | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 23, 2014

4 stars for the need of re-enforcing it ; otherwise superb. After reading some reviews of wing snapping under tight turns , I decided to run an extra Carbon Fiber Tube spanning 80pcnt of the wing and re-enforcing the wing joining formers . I used the same motor/Prop for the MORAY with 4 S 2700mAh nanotech battery. This glider is a blast ; Be careful with the elevator while transport ( a bit fargile) ; so far 20 flights no problem in tight turns ; speed good ~ 80mpH and do not recommend testing the limits but can go faster.

Richard | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 26, 2014

Flew mine for the first time yesterday.It climbs like mad with the power on,so adjusting the thrust line is going to be fun.It was a pig to put together,it has a nasty stall when it turns right (let you work that one out) On the plus side it is cheap....and glides very well. I am using a 1200kv motor, 40 a esc , 9*6 folding prop,and a rhino 3s 2250 30c pack. Still needed church roof to ballance.You pays your money,you takes your chance.

DwildPilot | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 18, 2014

I love this Speedy flies great. I'm having fun the day I got it.

Qestro | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 03, 2013

The Speedy product description here identifies a 1 piece wing. However the product is supplied as an inferior 2 piece wing which is the the same as the cheaper GL Speedy.

The Speedy version is supposed to be superior to the GL Speedy and is supposed to have the superior 1 piece wing and stronger fuselage as described here but instead HK send out the 2 piece wing version instead but with the superior fuselage...

HK claims they sent the correct product but it is not..... HK quality control is getting worse and worse as this is the third model that has arrived either incorrect, missing essential parts or simply broken in transit!!!

Great to see HK expanding and generally providing a great service but there seems to be increasing issues with supplying the correct products.

Qestro | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 19, 2013

Product ordered was 1 piece wing Speedy but model delivered was 2 piece wing and inferior design GL speedy. Not happy as I already have the gl version and did not need another one. Average QC HK. 3 of the last 5 planes ordered from HK were either damaged or supplied with incorrect/missing components or the wrong product. HK does not follow up such warranty claims and your warranty policy is a farce... I am tired of HK customer service as other is none to speak of at the moment.

  1. 1
  2. 2
  3. 3
顧客ファイル
unbekannte Teile Download [55]
Manual Speedy Download [2540]
Anleitung DE Speedy Download [523]
Servo Einbau Beispiel Download [195]
No File Name Download [223]
MANUAL Download [1]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー