サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

スピリットミニスポーツグライダー815ミリメートルEPO(PNF)

Generating Links

スピリットミニスポーツグライダー815ミリメートルEPO(PNF)

価格:

Now save 節約 ¥0.00 ¥0.00

¥12,016.17
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
087000036
送料無料したい? クリックする こちらへ 詳細情報を参照する

スピリットは、高速組立と簡単に部品の交換になり一緒に建設高度なクリップで華麗かつ高速ミニグライダーである、それはまた、ミニに御霊を回すための理想的であるプッシャーポッド変換キット(プッシャーモーター含まれていない)が付属していますFPVプラットフォーム。

タフなEPOフォームから作られ、御霊が迅速かつ組み立てが容易でもあり、モーターと折りたたみ小道具がプリインストールされているとESC&サーボのも、事前に嵌され、翼&すべての移動テールは、単に一緒にクリップと2 PC上羽ねじは、実際には、モデルを構築するよりもデカールを適用するには時間がかかります!おそらく精神とFPVしたい人のために、モデルは、あなたがポッドに独自のモーターを組み立てた後、ノーズコーンと異なる小道具/スピナーをブランキング交換は、設定を変更すると、高速かつ簡単です(何のモータが含まれていない)プッシャーモーターポッドが付属しています潜在的にあなたの精神を楽しむの異なる方法を提供しています。

それが来るように、霊がオフ素晴らしいパワーグライドと迅速かつ機敏な、飛ぶ爆風である、それは飛ぶことは、この偉大な小さなグライダーを容易にする悪い傾向と楽しいの膨大な量を持っていません。パルスを上昇させるのに十分な速まだ公園で飛行するのに十分小さい、聖霊は完璧なグラブであるnは格好良いモデル、容易に輸送、組み立てやすく、堅牢でかつ飛ぶやじるフライ、スピリットは非常に多くありますお金のためのモデルの!

特徴:
プラグ・アンド・フライ....単にあなた自身のレシーバ/バッテリーを追加し、飛びます!
高速かつ組み立てが簡単
トラクターや推進式の選択
タフEPOフォーム建設
簡単な交通のための取り外し可能な翼
優れた制御のための全ての移動テール
アセンブリのためのツールが付属し....何の接着剤は必要ありません!
簡単な部品交換のための翼と尾を一緒にクリップ
優れた飛行性能

仕様:
翼幅:815ミリメートル
長さ:623ミリメートル
フライング重量:345グラム
推力:580グラム(トラクター)
モーター:2621ブラシレスアウトランナー1100kv
プロップサイズ:8時間×週5日の折りたたみ
ESC:20A BEC /ワット
サーボ:5グラム×4

含まれています:
プッシャーモーターポッド、ブランク5x4.5プロップ、スピナー&ノーズコーン
説明書
ツール
Y-リード

必要なもの:
独自の4チャンネルTX / RX
22-26ブラシレスアウトランナーモーター2200kv(プッシャーCongurationのみ)
450mAh〜シティ500mAh 3S Lipolyバッテリー

  • 翼幅(ミリメートル) 815.00
  • Spirit Glider
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Mat | 確認済みの購入者

  • Overall
  • Quality
  • Value

I am really liking this plane!

Sep 20, 2017

Fantastic little plane. Easy bolt-together (two screws) wing, comprehensive fixing kit which allows for either front folding prop or top-mounted pod configurations. Even comes with an actually quite nice little screwdriver. Decals have to be applied and this is definitely the most time-consuming part of the build, it took me about 20 minutes with all the other parts being either plug together or screw in.
In flight it's pretty stable once trimmed but not too fast; cuts though wind quite well. Probably good as a second plane but use the recommended D/R & Expo from the rcgroups.com thread as a starting point as the ailerons on this little acrobat are very sensitive.
Other than that the only other things are buy several batteries - they only last around 4-6 minutes and you'll burn though them in no time. And buy a micro/parkflyer sized receiver with at least 4 channels & either normal servo end-pin sockets or adapters. There's not much space and receiver install can be a challenge so going with servo end-pins is probably the best idea.

Pawel | 確認済みの購入者

  • Overall
  • Quality
  • Value

Love it !

Jul 23, 2017

Very good plane after bix 3 . Easy to fly,fast i stayble...Thanks HK - love this plane

jon | 確認済みの購入者

  • Overall
  • Quality
  • Value

5 stars

Nov 04, 2016

Flew perfect right out of the box.c.g. in the manual works good for 500 ma 3s battery. Fast ,stable and fun. Good job HK five stars

foamflyer_de | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 16, 2016

I bought this litte glider in a sale and at first look out of the box I was really happy. The foam looked nicely smooth and durable and the sticker went on well. Unfortunately when I screwed the main wing on, nothing was really true with this glider. There was a huge angle between the vertical stabilizer and the main wing, so I cut down a bit from one side of the fuselage to make them even. Next thing I noticed is that the fuselage has no right angle to the main wing on mine, which bothered me before maiden.
But maiden flight went exeptionally well. It tracks like on rails, rolls like crazy and goes up vertical without a limit. It's quite fast, but can also been flown pretty slow with no tip stalls so far. Only the motor gets quite hot, so I need to pause after one flight to let it cool down a bit before the fun begins again!
Definitely recommended, if you don't care optimizing a bit with a cutter :-)

Robert | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 14, 2016

The Spirit Mini is an awesome glider. Out of the box is pretty much does it all - it flies like it is on rails yet is highly agile if you want to do aero's. The standard motor has heaps or grunt to move the Spirit along at a rate of knots. The glider is not quite a hotliner but it certainly does not want for speed. I am using 3S 850mAh packs in mine for about 8 minutes of powered flight. On the slope with about 15kph of wind, the Sprit is a good sloper. I can't pick a fault with my Spirit Mini Glider. I recommend this one. Good job HK!!

620ertom | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 17, 2015

The best Merlin-Clone in this shop :)

All links are same as the original only made of another kind of Plastics.

For sure it's not a hotliner but it is flying faster than expected. Nice plane for a fair price.

Ron | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 15, 2015

flew mine for the first time today. There was hardly any winds. All went well, I used a 850 3S nanotech that goes in the front, and all the rest is underneaty (esc and my receiver). I didn't bother using any velcro; the receiver lies loose but cannot move around enough to matter. The 3S 850 nanotech fits snug in the front, it is very tight, and that is a good thing. CG is okay in that setup; I hardly trimmed any elevator. I did trim out the ailerons, it tended to roll somewhat.
One thing I still need to fix is the ESC brake setting. The motor does not brake, so the prop keeps spinning (windmilling) even with throttle off. So I landed with a spinning prop, but it did not get damaged. Happy with this plane, will be taking it with me on vacation. Taking it apart and putting it back in the box is do-able. ESC got hot (warm anyway) on the bench, just feeding the receiver and servo's while setting things up. See how it will hold up after a few flights, maybe put in a slightly better ESC. I will have to see.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 17, 2015

I purchased this with the Kenetic and like the Kenetic better due to the design of the battery compartment but everything else is similar, this does have a 2-piece wing but since its only 815mm theres no need to break it down for transport.

barry29 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 23, 2014

Recieved the glider very fast, once I opened up the box, everything was super! for this price, you can't go wrong. I ordered 3 Lipo's 460mah 3S , and they fit perfect. Flying the glider is a piece of cake, track's like it's on rails. Very happy with it!

jetson3000 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 05, 2014

I bought this mini glider for fun but unfortunately the BL did not work from the beginning..that a pity..I'm not satisfied about the product!
Hey HK please double check the material purchased fro Freewing!
Now I have to replace the BL motor...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
顧客ファイル
Spirit User Manual Download [9578]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー