合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

ST360クワッドローターフレームワットモーターとプロペラ360ミリメートル/

Generating Links

ST360クワッドローターフレームワットモーターとプロペラ360ミリメートル/

購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
031000132
送料無料? ここを クリック 詳しく知ることができ!

ST360は、品質の素材から構築された考え抜かれた360ミリメートルのクワッドローターフレームです。アームは、超耐久性ポリアミドナイロンから構成されている間、メインフレームは、アルミニウム合金です。

総会は含ま必要なすべてのハードウェアと簡単です。 ST360はあっても、独自の電源システムを選択することから当て推量のすべてを取り除く4モーターとプロペラを備えています。あなたは、単にあなた自身のブラシレスESCは、マルチローターの制御ボード、3S lipolyバッテリーと4CHの無線システムを追加する必要があります。

このフレームの大きな特徴は、カメラや他のアクセサリーを取り付けるためのメインフレーム底板の前面および背面に大型取り付けタブです。これは、空中映像を取るか、または任意の追加の取り付けブラケットを追加する必要なしFPVを飛ぶのに最適な方法になります。

ST360はまた、着色された武器(白2と2黄色)配向のために素晴らしいですしています。それはあなたが正しい方向に飛んで保つのに役立ちます。

私たちは、このようなマルチローターコントロールボード、ESCは、よりなどのマルチローターエレクトロニクスのフルラインを提供しています。空気中のクワッドローターを取得しやすくまたはより手頃な価格ではありませんでした!

特徴:
•品質のアルミ合金やポリアミドナイロンから構築されました。
•オリエンテーション用のカラーアームが右方向に飛んであなたを維持します。
•簡単にカメラが搭載するためのメインフレームの底板に大型取り付けタブをクリックします。
•簡単なアセンブリ。

仕様:
:360ミリメートル
身長:90ミリメートル
重量:170グラム(ワット/アウトエレクトロニクス)
モーターマウントボルト穴:16/19ミリメートル

ボックス内に含まれるもの:
ST360クワッドローターフレーム
4×ST2210ブラシレスモータ
4×8045プロペラ
バッテリーストラップ
すべての必要なハードウェア

必須:
独自の4CHの送信機と受信機
4×15〜25アンペアESC
1×HobbyKingマルチローターコントロールボード
1×1800〜3000mAhの3S 11.1V Lipolyバッテリー

ビデオをアップロードする

ビデオをアップロードするには登録してください サインイン または 新規登録

レビューを書くために登録してください サインイン または 新規登録

nooby | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Oct 25, 2015

The prop adapters keep falling of the motors. No matter how hard I tighten them. Be warned. You will need some sort of landing gear if you mount your battery under the frame. I'm using kk2 with hobbykings 20amp esc flashed with Simonk. Flies ok once you get it tuned in.

Matthew | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

May 26, 2015

This frame package is a good deal for a beginner, but suffers from poor design and quality issues.
Quality wise, my frame came with screws that were too large to fit through the holes in the aluminium plates - I had to manually enlarge each hole first before attempting to use these screws. After getting the screws 80pcnt of the way in, the heads stripped on EVERY single screw. Instead of being a cross head, they are a tiny Hex/allen key, whilst I had the right tool, the poor quality of the screws meant that as soon as they started meeting resistance, the head was stripped, rendering them all useless. I had to buy a new set of screws (which are very hard to find and expensive due to their size).
Design wise, the frame leaves no space for a battery, you are left to mount it underneath. The legs are too small for this and your quadcopter is expected to land on the battery which is hugely dangerous. Take a look around online and you will notice anyone with this quad has had to buy/build their own legs to get around this issue.
The redeeming factor is that the motors seem to be pretty decent and its fairly good value overall. Although I would rather have spent 10pcnt more and got a similar deal elsewhere for a better quality kit.

Justin | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Mar 03, 2015

Great kit for the money, plastic arms can break easily if your a beginner but it's cheap enough to replace even buy a new kit for spares. Motors are very good, very happy with it. Flies awesome.

Michael | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Nov 08, 2014

Loving this quad. I'm using an emax 4x esc with the kk2.1.5 board. Flies like a toy Hubsan quad - in a good way. Very responsive. Much smoother than a 450 size and big enough to still see. I get 13 minutes on FPV with a 3700mah battery. I stink at FPV, but I get similar flight times flying it harder line of sight. Amazing. Had one mishap that broke the foot on of the arms and nothing else. My 450 quad would have been in pieces.

Choubaka | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Sep 18, 2014

Excellent product. Not a lot of space between plates but easy with use of standoff.
Motors are powerfull.
My setup:
ESC: 30a afro
FC: KK1.5v4sc
HK PowerBoard 3.5mm bullets
3S 2200 ZippyCompact
13 minutes flight

Andrew | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Sep 09, 2014

My first Quad, Flies like a champ with the HK 2.1 board. All in without a radio the build was $110.00 US. Can`t beat it ! total assembly time about 3-4 hours. Motors are so quiet my friend with a DJI Phantom is jealous. I had to dial in lower rates on the T 9x it is so sensitive to stick movement.

Ahmad S | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Aug 07, 2014

Great quadcopter to get in the hobby , good value .
Do not overtighten the screws, you must buy m3x10 screws seperately to mount the motor.

Stefan | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Aug 04, 2014

It's a nice looking frame, but it has some downs. The holes for the lower aluminium plate didn't quite fit. Some force was needed to get the screws in with an angle.
Second problem is that the holes for the motors were fitting, but the screws length didn't allow to really get more than one or two turns into the motor.
I needed to make some corrections here. A little longer screws should do the job, but I worked on the plastic of the arm.
And the last downer: the motor on full throttle is really bending the arms. They should be a little more stiff imho. But that shouldn't matter too much, when in the air.

Still I love the product, but it could be a better quality to make it perfect.

My configuration is with a NanoWii controller (MultiWii 2.3) and Afro 20A Slim ESCs.
The Motors fall out of sync again and again and I need to investigate how to fix that. But thats another story... related to the ESCs I guess.

Jeff | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Aug 01, 2014

I've bought several of these. The motors, props, and arms are what break, so it's a really good repair kit for itself. However, the recent ones I've bought all have the same stupid flaw, the bottom panel has the holes drilled in the wrong place! They don't line up with the leg holes at all. I compared it to one that I built about 6 months ago (The first one) and the legs are the same, but the bottom plate's holes are in a different place... Bummer, because I'm trying to build a second one right now.

Flyer94 | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Jul 23, 2014

It's really good, very stable frame. Frame weight is 170 g, frame motors escs (Multistar 15A) is 400 g, take off weight (with Zippy 1800mAh 3S, Hobbyking Multi-Rotor Control Board V2.1, Turnigy 9X receiver and some wires) is 645 g. Hovering power consumption 6-7A with 3S, flying time is about 15 min. 2S setup is not flyable.
This quad could take up to 350g payload, but i prefer flying with FPV equipment of about 90g. There's enough space to place an Arducopter board with GPS module and telemetry small FPV set.
To sum up, it is an excellent, extremely durable quad and it's very affordable!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
顧客ファイル
No File Name Download [2192]
No File Name Download [2192]
ready to fly with KK2.0 v1.5 Download [70]
ST360 Download [567]
Myself with the quad Download [989]
everything required Download [4227]
here Download [1639]
ST360 Download [2496]
upgrade chassis Download [138]
No File Name Download [283]
  1. 1
  2. 2
  3. 3
  4. 4
ファイルをアップロードする

登録してファイルをアップロードする.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー