サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

SU47ツイン55ミリメートルEDFジェット(KIT)

Generating Links

SU47ツイン55ミリメートルEDFジェット(KIT)

価格:

Now save 節約 ¥0.00 ¥0.00

¥5,231.85
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
SU47BRKT-KIT
送料無料したい? クリックする こちらへ 詳細情報を参照する

ケースにジェット戦闘機の設計での技術的な進歩を示すために、実験機としてロシアにSokhoiによって開発されたSU-47は、高い機動性と攻撃の高角度のために前進後退翼の構成を使用します。

あなたは、実験的なEDFジェットを探しているなら、SU-47はすべて右のボックスを刻みます。前進翼の設計は、ふてくされて、通常のEDFジェット観衆から頭角を現すだろう。また、ツイン55ミリメートル3ブレードEDFユニットを搭載し、SU-47ツイン55ミリメートルEDFキットは通常のEDFのfoamieジェット、上記のステップである制御面と簡単にアクセスバッテリーコンパートメントヒンジ。あなたは3翼ファン、(操舵可能な前輪用のコントロールサーフェスの2および1)3×9グラムサーボ、11.1Vの2200mAhの3S1Pリポバ​​ッテリーとあなた自身に対応するために、2.3ミリメートルの軸と2×2040-4300kvブラシレスinrunnerモーターが必要になります送信機と受信機(送信/受信)とビルド時間の時間かそこら。

仕様:
長さ:1024ミリメートル
翼幅:750ミリメートル
ウィングエリア:12.7dm2
フライング重量:〜700グラム
ウイングロード:55グラム/ dm 2で
ダクトファン: ツイン55ミリメートル3ブレードファンユニット(付属)
バッテリー:11.1Vの2200mAhの20cは(必須)
バッテリーエリア:38ミリメートルX 27ミリメートルX 105ミリメートル(MAX)
サーボ:3×9グラム(必須)
ESC:2×18A(必須)

必須:
モーター:2×2040 4300kvブラシレスinrunner(シャフト2.3ミリメートルで)
サーボ:3×9グラム
バッテリー:11.1V 2200mAhのの3S1P 20cと
ESC:2×18A
ラジオ: あなた自身のTx / Rxの

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

bill987 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 27, 2013

Pas facile pas conseill aux dbutants

perdana RC | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 16, 2013

low price for high class and good quality

Vlad_Ru | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 01, 2012

Attention!
I bought the engine for the aircraft to the shaft of 2.3 mm as it is written in the description.
Collet which is sold bundled with edf can be mounted on a shaft with a minimum size of 3 mm.

supper sonic | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 02, 2011

I haven't receaved my plane yet but have ben reading alot on it and it sounds like a good buy can't wate to get mine

ng | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 12, 2011

fixed 2x 4.3k out runner motor, power shld be enough to lift the plane. look through the manuel but unable to find the c.g. anyone can share the c.g of this plane? thanks

Cptn.Crunch | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2011

Update-Aug 2. I modified the airframe to accept a single fan just ahead of the area for the original two fan position. I used the T-2815 4800 KV with a 40 amp SC and a 2200 Nano. Internal ducting was easy using depron and plastic pop bottle parts with the twin exit/efflux tubes reduced to the same size of other single fan setups. No dead weight but I did fill the flimsy nose cone with expanded Gorrila glue. Excellent flight performance, easily over 100kmh, rolls perfect and lands well with a little power on. Easily my favorite jet now.

Clayton | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 28, 2011

OK, so this is not a good first EDF, I have gone through a series of misfortune and after making some repairs I have finally flown this. I have found the CG needs to be roughly 1/2 to 1" back from the wingtips. Since up elevator creates the effect of a aileron up wing spoiler as everything is connected by linkage. I have found that it helps to have some amount of down aileron at nuetral elevator so you get a flaps effect. This thing needs speed to get airborne so get some good esc's with heat sinks and some powerful motors. I had to use a 1300 Mah 3 S battery to get it off the ground and it was admittidly a short flight. If you wanted to have separate aileron servos and evelavtor servos the added weight in the back may help with the balance. It flew nicely once airborne. The one rock got sucked up and broke a fan blade so it didn't have the power it should have butwith high nose up I had good control. I'm thinking about buying a second kit now that I have some of the basic info to help it be more succesful. Hope you get one and sort it out so we can all learn from your efforts. !!!

Tartago | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 20, 2011

I got this plane from FIY in ARF mode.

Built in less than 45min.

The stock EDFplusESC responded very well to 2.2 nano-tech 25C & Turnigy 2.2 20C.

The plane flies excellent, the only weak point is the front landing gear that is easily broken. I glued a piece of plywood with a hole to replace the plastic one.

Manouverability is superb. Rolls are absolutely axial, no bad tendencies.

Landings need to be done carefully with some speed .

GuitarPlaya | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 26, 2011

Have had the pleasure of having two of these Used Hk foam safe and HK five minute eoxy. Hk esc, KMS inrunners from phase 3 F-16 Caorona 4ch synth RX Turnigy 9X TX.

Both hit the ground not on purpose. Cg no brainer built in with the placement of the battery tray 2200 HP 3S easy ROG.

Do not think I will try another

will probably put the power set in an A-10 kit

Happy landings

EDFANMAN | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 11, 2011

I RECEIVED MY SU-47 KIT,IT APPEARS WELL DESIGNED,PARTS FIT PROPERLY.

THE ONE OBSERVATION HERE IS THAT THE EDF UNITS SUPPLIED WITH THE KIT ARE UNAVAILABLE ,THEY ARE DIFFERENT FROM THE USUAL 55 EDF UNITS IN A FEW IMPORTANT WAYS,IS THERE A WAY I CAN PURCHASE TWO ADDITIONAL UNITS,I DO NOT WANT TO USE A DIFFERENT STYLE UNIT.

Thanks

mike

mwb8345a@aol.com

Try to include as much data as possible.

  1. 1
  2. 2
顧客ファイル
SU-47 CG Download [19]
exhaust pipes and motors Download [72]
mounting the fan and esc Download [113]
55mm fan system Download [120]
fan blade 55mm Download [35]
MANUAL Download [6]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー