新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

T-45 R / C EPOジェット(キット)

T-45 R / C EPOジェット(キット)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
2389 g
SKU:
LS-T45ARF

Combine

essential items and
esc
battery
servo
acc
商品概要

T-45は米海軍で使用されている今日でも空母可能なトレーニングジェットです。このスケールT-45はRCジェット機のパイロットとしての訓練で必ずステップです!

耐衝撃性、超タフなEPOフォームから成形このジェットは組み立ての準備ができていますし、また、操縦可能なフロント着陸装置、固定主脚と5ブレード64ミリメートルEDFファンユニットを含んでいます。

あなたは3S1Pの1500mAhのリポ、30Amp ESC、4チャンネル以上とエレボンミキシングと送信機と受信機、3×9グラムサーボ(操舵可能なフロント着陸装置のための1つ、エルロン用とエレベーターに1つ)が必要になります。 64ミリメートルEDFユニットは、EDFブラシレスモータの設置ご希望の風を作る胴体にプリインストールされています。

仕様:
ウイングスパン:780ミリメートル
長さ:880ミリメートル
フライング重量:〜610グラム
ダクテッドファン:64ミリメートルファンユニット(付属)
電池収納部:90x46x46(MAX)
ラジオチャンネル:4

必須:
バッテリーの1500mAhの3s1p
モーター:(64ミリメートルEDFファンユニットを合わせて)B2040ブラシレスinrunner
ESC:30A
サーボ:3×9グラム
ラジオ:あなた自身のTx / Rxの

Product
Specifications

追加情報

  • 単位:
    LS-T45ARF
  • Brand:
    N/A
  • 容量(mAh )
    いいえ
  • 重量(g )
    2389.00
  • 長さ:
    835.00
  • Width:
    205.00
  • 高さ
    295.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Das Modell aus EPO ist echt sehr Stabil und hllt einiges aus.

Ich fliege das Modell mit einem 4200kv Motor und einem 30A regler und einem 8Blatt Impeller als akku verwende ich ein 1900Mah 3S 30C akku und damit sind ca 3 1/2 Minuten vollgas drinn es passen aber auch ohne probleme die Turnigy 3000mAh 4S 20C Lipo Pack (Produkt ID: T3000.4S.20)rein aber da sollte mann dann den passenden motor dazu haben sonnst raucht der motor ab.



Das modell ist sehr stabil in der luft und ist auch was fr vortgeschrittene Anfnger.



Handstart ist ohne probleme mglich und das landen ohne Fahrwerk ist auch kein problem.

Das Modell ist echt zu empfehlen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
took mine for its first flight this morning....as the ground was too wet for ground take off I did hand launch....1st light toss....took off level no problem whatsoever, fantastic flyer, I using a 35esc 6 blade EDF 4300KV with a 3S 1300mh Nano Tech. Lands beautifully it very gracefull in the sky and very fast on rolls which I like and yet very stable. not super fast with this set up but fast enough far from slow. But as a trainer fighter jet it suites it very well and the construction time was about 40mins quality pretty good. Can fly this jet slow too easily under 50pcnt throttle. Nice performing T45.5/5!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I had Motor, Speedy and Batteries already. Perfect for me, Plane was quick to build and flies great. I have never installed the undercarriage , bellylanding is easy to do. Only bad thing is the red nose. The material is too thin. I add some foam from inside, that helps to avoid any damage.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The plane is rather far pre-built, thus a kit, and mine had all parts well aligned and glued. The cons were the fan unit was not so easy to replace as it was glued in (I had a complete unit ready for this). Also the main wing lock, rear pins, are pretty weak.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super zufrieden mit dem Teil. Hab ein leichtes EZFW eingebaut. Damit macht es noch mehr Spass. Sieht super aus. Und ist wohl ein bisschen schneller, war mir aber nicht wichtig. Motor: Turnigy 2615 4800kv, ca. 31A an 1,6Ah 3S.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this kit, its good quality and arrived with no damage. It took me 7 hours to assemble which i built with spare parts i had laying about, and for the maiden flight it flew really well. Ailerons only need about 60pcnt travel. I didnt have enough power on 3s so i put in a 4s 1600mah nano tech which fits snugly. I burnt the motor out and left a smoke trail behind me which i had a chuckle about so now im waiting on a replacement motor and fan that can handle 4s. Its best to set this hawk up to handle 4s. The only real drama is accessing the fan inside. Theres no proper cut out for it. U can put the motor in using magnetic screw drivers but to remove the whole fan unit u need to cut the bottom of the fuse. Space is a lil tight up front so i mount the esc in the air ducting, works well. Other then that its a sweet flying little edf on 4s.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super gemachter kleiner Flieger. Die Flugeigenschaften sind mit 3S 1800 eher trainermig und vollkommen problemlos. Ausgerstet wurde der kleine mit den Komponenten aus einem zerbrselten AMX Jet. Der Impeller der beiligt ist haargenau der gleiche. Ein Stck mattschwarz lakierter Joghurtbecher als Schubdse (53mm)bringt reichlich Performance.
Querruder ber 2 Servos im Flgel direkt anlenken, die eingebaute Torsionsanlenkung hat reichlich Spiel. Die Oberflche ist fr einen Schaumflieger wirklich gut. Etwas zustzliches Klebedekor und der Dinger wird richtig hbsch. Nehme gleich noch einen zweiten fr einen fiesen 4S Antrieb und werde auch das Seitenruder noch anlenken. Tolles Gert fr zwischendurch.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Amazing value for money.Although not for the novice builder as the instructions are pathetic.Great quality epo frame with ply and cf in the right places.Use a strong servo for the elevator as it has to push two rods to two seperate elevator halves.My set up is.
Motor/fan-Lander 64mm 4000kv
Esc-Turnigy trust
Servos-Turnigy mg's 2kg torque
Tx/Rx-Frsky.
Battery-1800mah 4S
AUW-670g-Power-665watts @40amps.
Some foam need removing to gey battery far enough aft for cg.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great kit received it today and built it today amazing quality for the price, this one will run on 1500mah 3s1p and 4800kv inrunner. considering buying second for more powerful set up. very impressed, great quality, great price, great job HK.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mijn eerste vlucht gedaan en gelijk fpv gevlogen. geprobeerd met een 3 cells 2200 kwam ie niet los van de grond. toen een 3cells 1000 mah en vloog perfect voor een beginners edf (niet eens naar de cg gekeken op het oog alle stuurvlakken recht gezet en hoefde tijdens het vliegen niks uit te trimmen) Vliegt ook super langzaam en heel goed controleerbaar. goede vliegtijd terwijl mn fpv set op de zelfde accu zat. extra gewicht van de orange stabilizatie en zelfgemaakte rudder 1 servo en stuurstang extra :) 4 goedkoopste 9gr servo's en stuurt super precies kon het gewoon niet geloven. landen op gras zou ik niet aanbevelen met landings gestel.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。