新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

T5682 TurnigyプロコンプブラシレスInrunnerモーター1700kv

T5682 TurnigyプロコンプブラシレスInrunnerモーター1700kv

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
992 g
SKU:
T5650-1700
商品概要

あなたが大規模なもパフォーマンスボートまたは1/5スケールRCカーのための深刻な電力が必要な場合は、Turnigyプロコンプシリーズinrunnersよりもう探す必要はありません。これらの見事に設計されモータは、高品質、超高性能&信頼性を提供します。モータが再ビルド可能であり、取り外し可能なエンドキャップを備え、モータ軸は、機械加工、フラットを有しており、モータのこのモンスターによって生成される極端なトルクを処理するために、直径8ミリメートルです!

仕様:
サイズ:56x82mm
KV:1700rpm / V
Lipoly細胞:6S
最大効率:4800ワット
最大効率で電流:180A
最大電流(10S):265A
無負荷電流:4.4A
内部抵抗:0.0038
シャフト:8ミリメートル
重さ:690グラム

Product
Specifications

追加情報

  • 単位:
    T5650-1700
  • Brand:
    N/A
  • 重量(g )
    992.00
  • 長さ
    0.00
  • Width:
    0.00
  • 高さ:
    0.00
  • KV ( RPM / V )
    1700.00
  • 最大電流( A )
    265.00
  • 電力( W ):
    4800.00
  • 長さB ( mm)の:
    82.00
  • ことができます長さD (ミリメートル)
    74.00
  • 最大電圧( V )
    25.00
  • シャフトA (ミリメートル):
    8.00
  • Unit Weight (g):
    690
  • 直径C (ミリメートル)
    56.00
  • 総丈E (ミリメートル)
    106.00
  • 抵抗( MH ):
    0.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I had a minor problem with one of the wires. Shrinking tube was not double as on other two, and after heating it, to change stock connectors, was cut a few centimeters due to heat. Then motor was tested under a load at 180A at 6s with a lot of cooling air. Rpm was 26K. After 4 min of almost full throttle smoke started coming out of the motor and I could here a "screatching noise". I stopped motor and thought the bearings were shot. Well, something worst had happened.The spindle/rotor of the motor holds the magnets together with a bit of blue epoxy(2 drops each only!!!) and a thin film of I guess, polyamide". Magnets had broken both epoxy and film and touching inside of motor. Final result 2 of them were badly scratched. Now I need to re-glue them with a very good epoxy hopefully, and balance the whole thing. That means a lot of work...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a Great Motor,and for the price you can't beat it. I have been running it in my 42' Mono now for 2 mounths every day,(5s 40c Batts) and no problems.This motor would also work great in a 1/5 scale truck or buggy.Awsome power,around 6 Horse Power,Instant throttle response.Will buy more as soon as they come back in stock.(hope they get more).Would recommend this motor for anyone needing massive power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wow... I fired up this bad-boy today for a quick test free-holding it. It spins up to max speed instantly with no load. Running at max speed It is incredibly smooth. Someone took the time to do a high quality build here and custom balanced the internal shaft and magnets.

What an impressive motor. This is beyond belief.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just got my hands on this big block and what I can say its a tremendous powerhouse to be used on 1 meter cat.Would like to know what is the best esc to connect to this beast?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wow! What a monster! It is definatly a TP Power Motor- Parts inside and Cables from the same manufactor. More Power then the Leopard 5682! Using this Motor in a 1/5 Redcat Rampage XBe- Insane Power!
This is a powerful High Quality Motor with incredible Torque.
4 Pole 18 Slot. Super Low Price!!! Buy, Buy, Buy!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。