New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

T5692 TurnigyプロコンプブラシレスInrunnerモーター1320kv

T5692 TurnigyプロコンプブラシレスInrunnerモーター1320kv

Discontinued Product

Please continue searching for a similar product.
SKU:
T5660-1320
WANT FREE SHIPPING? Click here to find out more!

あなたが大規模なもパフォーマンスボートまたは1/5スケールRCカーのための深刻な電力が必要な場合は、Turnigyプロコンプシリーズinrunnersよりもう探す必要はありません。これらの見事に設計されモータは、高品質、超高性能&信頼性を提供します。モータが再ビルド可能であり、取り外し可能なエンドキャップを備え、モータ軸は、機械加工、フラットを有しており、モータのこのモンスターによって生成される極端なトルクを処理するために、直径8ミリメートルです!

仕様:
サイズ:56x92mm
KV:1320rpm / V
最大電圧:30V
Lipoly細胞:8S
最大効率:6000ワット
最大効率で電流:190A
最大電流(10S):375A
無負荷電流:4.2A
内部抵抗:0.0043
シャフト:8ミリメートル
重さ:813グラム

  • 単位 T5660-1320
  • Brand -
  • 重量 1140.0000
  • 長さ 0.00
  • Width 0.00
  • 高さ 0.00
  • KV ( RPM / V ) 1320.00
  • 最大電流( A ) 375.00
  • 抵抗( MH ) 0.00
  • 最大電圧( V ) 30.00
  • 電力( W ) 6000.00
  • シャフトA (ミリメートル) 8.00
  • 長さB ( mm)の 92.00
  • 直径C (ミリメートル) 56.00
  • ことができます長さD (ミリメートル) 84.00
  • 総丈E (ミリメートル) 116.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

BIG MOTOR , this motor is huge , running on a 150A controller , lowest speed current draw at 15 volts is just above 1 amp , max speed on 15 volts , current is just above 5.8 amps both readings on unloaded motor , great quallity , but better sleving over 3 main wires could be better , as one has split on mine , but i will replace it :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

BIG MOTOR , this motor is huge , running on a 150A controller , lowest speed current draw at 15 volts is just above 1 amp , max speed on 15 volts , current is just above 5.8 amps both readings on unloaded motor , great quallity , but better sleving over 3 main wires could be better , as one has split on mine , but i will replace it :)

Running on 8s (esc is the Turnigy AquaStar 240A HV) in a 45" hull. The thing is scary!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Running on 8s (esc is the Turnigy AquaStar 240A HV) in a 45" hull. The thing is scary!

this would go nice behind the hobbyking jet drive for large boats
oh yeah bring it on , 1/4 scale jet boats

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this would go nice behind the hobbyking jet drive for large boats
oh yeah bring it on , 1/4 scale jet boats

All I can say is Wow! I wish it wasn;t winter and I could slip this bad boy into my 40" mono to test.

Definately NOT a leopard clone. Different core & windings 4 SURE!!

I haven't recieve my TP power motor yet to compare construction. I will follow up.

This motor has 16 steps as per other poster on this brand as opposed to 12 steps for leopard motors.

For once i am stumped as to who makes these?? Or which brand it is derived from unles HK actually did request a factory to make their own vrand.

I will have to consult some other motor GURU's to see if this is a 4, 6 or even an 8 pole like a Neu 2210.

Core resembles a Neu or Aqua craft UL1 motor in that looking from the outside in, it looks incased. Maybe I will take it apart but, I don't really want to at this time.

WIres that exit the rear vent holes should IMO be better insulated with lots more heat shrink or Med. to large size silicone fuel tubing. 4mm ID require and rear vent holes are approx. 9mm in diamter.

I wish they would tell us how many poles it is so I don;t fry an esc on testing!!!! LOL, will use cheapy esc on bench I guess.

More to come ! Merry X-mas!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

All I can say is Wow! I wish it wasn;t winter and I could slip this bad boy into my 40" mono to test.

Definately NOT a leopard clone. Different core & windings 4 SURE!!

I haven't recieve my TP power motor yet to compare construction. I will follow up.

This motor has 16 steps as per other poster on this brand as opposed to 12 steps for leopard motors.

For once i am stumped as to who makes these?? Or which brand it is derived from unles HK actually did request a factory to make their own vrand.

I will have to consult some other motor GURU's to see if this is a 4, 6 or even an 8 pole like a Neu 2210.

Core resembles a Neu or Aqua craft UL1 motor in that looking from the outside in, it looks incased. Maybe I will take it apart but, I don't really want to at this time.

WIres that exit the rear vent holes should IMO be better insulated with lots more heat shrink or Med. to large size silicone fuel tubing. 4mm ID require and rear vent holes are approx. 9mm in diamter.

I wish they would tell us how many poles it is so I don;t fry an esc on testing!!!! LOL, will use cheapy esc on bench I guess.

More to come ! Merry X-mas!!!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!