新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

TGY AerodriveXp SKシリーズ35-36 910Kv / 310ワット

TGY AerodriveXp SKシリーズ35-36 910Kv / 310ワット

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
187 g
SKU:
SK-3536-910
商品概要
TURNIGY AerodriveXp SKシリーズ
AerodriveXP SKシリーズモータは、それらのR / Cプレーンのためのアウトランナー技術の最高をしたい人のために設計されています。典型的には約8〜10%の効率改善は、同様のクラス化モーター上見ることができます。これは次のように一部起因しています。
ステータラミネーション:0.2ミリメートル
マグネットタイプ:N45SH
ベアリング: デュアルオーバーサイズ(日本語)
モデル:SK35-36 910
KV:910rpm / V
オン:8
抵抗:75
アイドル電流:1.12A
シャフト:4ミリメートル
重さ:112グラム
定格電力:310ワット
ESC:30A
細胞数:3〜4 Lipoly
* 7 10、* 8.5 11、12 * 5:プロップを推奨
パワー同等:0.30 0.40グローエンジンに

*マウントとプロペラアダプター付属品(図示せず)を含みます
結果は。SKモーターズ岩であります!
サードパーティのテスト結果は903rpm / VのKvを、次のデータを持っているために、このモーターを示します。
重さ:112グラム
KV:903
Rmのオーム:0.0621
I / O:1.11A
ステータ:28x14mm
テスト結果はまた、このモーターはスコーピオン3014から18/3014から22またはDualsky XM3536CA-8よりもほど良くない場合は、より良い性能を持つことを示して!
Product
Specifications

追加情報

  • 単位:
    SK-3536-910
  • Brand:
    N/A
  • 重量(g )
    187.00
  • 長さ
    0.00
  • Width:
    0.00
  • 高さ:
    0.00
  • KV ( RPM / V )
    910.00
  • 最大電流( A )
    0.00
  • 電力( W ):
    310.00
  • 長さB ( mm)の:
    39.00
  • ことができます長さD (ミリメートル)
    24.00
  • 最大電圧( V )
    14.00
  • シャフトA (ミリメートル):
    4.00
  • Unit Weight (g):
    112
  • 直径C (ミリメートル)
    35.00
  • 総丈E (ミリメートル)
    58.00
  • 抵抗( MH ):
    75.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Der Motor luft mit 4S sehr gut, mit 3S hat er "Startschwierigkeiten" d.H. luft nicht sauber an, sondern stottert fr mehrere sekunden. Ideal fr Scale Flugzeug um Motorstart eines Verbrenners zu simulieren... nein einfach mhsam. Die Welle ist viel zu weich. Gehrteter Stahl wre ideal. Wann lernt Hobbyking mal, dass weicher Stahl fr Motorwellen ungeeignet ist??
Power und laufruhe sind tiptop.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have been very impressed with the specimen I got of this motor. Even though many have had bearing problems on this and similar motors, my 910kv motor really is superb. Test data as follows:
4s, 1000 25C Turnigy Nanotec (only had 2x 2S 1000 packs, 4s 2200 45C's on order now :D ), 11x5.5E APC, 40A Hobbywing ESC (same as Turnigy Plush) excellent match. Voltage dropped to 14 from over 16 - this will be much better on the 2200's. RPM was 10500, Amp draw 23.9. This means 335W, which will give me about 200W/kg, gr8 for 3D flying, and it will be more on the 2200 45C's. Motor was cool after 1 min run. This is going to be a perfect match for my e-Flite Pitts... a solid 5 stars.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
"This is an archived page. This product is no longer available and has been replaced by a newer product."



What!?!?!?



One of the very best motors HK has offered and now it's gone???



Bad move, HK. This motor can be used with 4-cell batteries, and the NTM Propdrive "replacement" can't. What kind of "replacement" is that?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I fly with this motor for a month, with a 11*7 prop, and on 3s lipo.

I use it for FPV and need a motor i can trust-It gives a lot of power to my 2,3 kilo homemade model.

But sadly today i stops in mid air-I was lucky enogh to get my plane home in 1 peace-But the motor was burnt inside.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used 3536-900 in a BF109 Messerschmitt Foami ( LN Models )

- Total Weight = 850g
- Lippo = Turnigy Nano 2200 3s
- Propeler = 9x6, 10x6, 11x6
- Controller = 30A (hot) changed to 40A

Very good acceleration, i can fly with only 30 Throttle, very low consumtion 130mah, i fly about 12 minutes.

My first 30A Controller got hot, so i changed to 40A, much better now.

As others said, the bearings are a little bit noisy, but don't worry or replace them, you need two of them:

- ball bearing = 4x9x4mm called 848zz
and
- ball bearing = 4x12x4mm called 804zz

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hola, monte 8 motores de estos en mi oktokoptero, excelentes no se calientan, llevo lipo 4S helices 10x4.7 trabajan bastante descansados. excelente respuesta a la aceleracion. Los recomiendo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great little motor for the dollars. I don't stress it at all 3S, 13x4 23a.

be aware motor not supplied with 4mm prop adaptor (been on backorder for weeks) and the shaft will bend if you have a ding so order one while your at it (also been on backorder for weeks)



verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tres bon moteur, belle finition
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Absolute Crap, didnt last 60sec's testing, pulling 280watts on a 3S, 14x4.7 prop, nothing but smoke....just as well I tested otherwise my octocopter(yes i brought 8 of these...) would of gone bye bye!

Avoid these like a kick in the nutz!

:(
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
5 star for a very good motor/price report. I bought a total of 6 along time, each and every one runs very fine today, after aprox 10 months since the first test. 4 of them were for a quadrocopter which flew well, then I use'em in a variety of planes, single or pairs (bimotor), on big planes with 4S battery, or small planes, etc.

I don't know if something it's changed now in production line and quality or I just was plain lucky in the first time, but I recomand it!!!

verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。