新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • USA

TowerPro 4130-6T 425グラム/ 477kv / 70Aブラシレスモーター

TowerPro 4130-6T 425グラム/ 477kv / 70Aブラシレスモーター

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
450 g
SKU:
TP4130-6T
商品概要

Towerpro 4130-6T
これは、モーターのtowerpros新品種の一部です。
ベアリングとシャフトの品質だけでなく、微調整ステータとマグネットのデザインを改善しました。

スペック。
サイズ:51ミリメートルの直径のx 89.2L
重さ:425グラム
アイドル電流:2.2A
お奨めリポコンフィグ:4-5セル(14.8V最小)
定数:477Kv
軸径:6ミリメートル
マックスEfficency:55A
最大負荷:70A
最大電力(W / 60代):1600
推奨プロップ:14x8


モーターが示すプレートとスピナーアダプタ(コレットタイプ)をマウント頑丈な合金が付属しています。グラブねじとシャフト保持器は、異なるファイアウォールは場所をマウントするためのシャフトを逆に緩めることができます。

Product
Specifications

追加情報

  • 単位:
    TP4130-6T
  • Brand:
    N/A
  • 重量(g )
    450.00
  • 長さ
    0.00
  • Width:
    0.00
  • 高さ:
    0.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Grate Motor! cool, quiet, powerfull.

thanks UH
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Awesome motor - plenty of grunt for a 10 pound model Sea Fury. Quiet runner on 14x 8.

Highly recommended
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this motor for an Extra 330 fiberglass from CMP that did not work out. I recently built another 330 from a different company for this motor. Wing length is 63 inches, plane weighs about 7lbs. This has turned out to be the best plane I have flown yet. This motor turns out 1200 watts @ 62 amps turning a 15X8 APC electric prop on 6s1p. Power trane runs cool and long. Using Sentilon 100 amp ESC from UH. Power to weight ratio is 2 to 1, more than ample for 3D. This motor is quiet, smooth, powerful. ESC provides smooth/linear response and control. 22.2 volts provides top end RPM.

If I were to build another plane like this one I would not be able to improve with any other choice of power train. I recommend this setup very highly.

I am curious to try the bigger brother to this motor for larger craft. This is a perfect setup, my best.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this motor for an Extra 330 fiberglass from CMP that did not work out. I recently built another 330 from a different company for this motor. Wing length is 63 inches, plane weighs about 7lbs. This has turned out to be the best plane I have flown yet. This motor turns out 1200 watts @ 62 amps tuirning a 15X8 APC electric prop on 6s1p. Using Sentilon 100 amp ESC from UH. Power to weight ratio is 2 to 1, more than ample for 3D. This motor is quiet, smooth, powerful. ESC provides smooth/linear response and control. 22.2 volts provides top end RPM.

If I were to build another plane like this one I would not be able to improve with any other choice of power train. I recommend this setup very highly.

I am curious to try the bigger brother to this motor for larger craft. This is a perfect setup, my best.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put this motor at a klemm35 from Graupner (2m/80inches wingspan, about 4.5kg/10lb total weight). This model is meant for a 15-20cc 4stroke gas engine. The tower pro motor easily pulls the 10lb model on 5s lipo (3700mAh) and a 14*7 APC like prop. The motor is very silent and has no vibrations. The plane is loose from the ground after a 30m runway (100feet). The average amp during flight were 16Amps during a scale like flight (15min on a 4000mAh lipo accu). A bigger prop will allow for aerobatics (can be up to 16*10 on a 5s according to the review above). All in all, a very good perfomance that made me happy. And therefore absolutely recommendable also due to the very high performance to cost ratio.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this motor with 6S 5000mAh in a 1,93m Jamara Decathlon with 3,5 Kg weight. Power is enought to have fun with the plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi,



here some technical data:



I used 5 Fepos. All Measurements under load:



1. 16x10



6200 U/Min

44,3 Ampre

14,8 Volt



> 655 W



2. 16x10 with 2,5



5900 U/Min

50 Ampre

14,7 Volt



> 735 W



3. 17x11



5760 U/Min

60 Ampre

14,5 Volt



> 870 W



I fly the 16x10 with 2,5 in a Magister ( Modell ~ 2,5 kg) from Multiplex. Battery is a 5s2p fepo. With this powerful Engine the Magister fly vertical in the sky.



Great Engine.



5 Stars !



greetings from Germany

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall


With 6cells at 1500 meter above sea level I get 8750 RPM from a APC 13*8 for only 25 Amps . It seems to be as efficient as the bigger AXI's . You cant go wrong at the price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just put this motor in the Graupner Aeroshell T6 with a 5 cell lipo and 14x7xoar prop and all I can say is ..WOW!!! This thing has some power, 100' loops are no problem. This is a 7lbs plane, and the motor is the most powerfull for its size.

Chuck
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。