サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

TrackStar 1/18スケール7.5Tブラシレスパワーシステム(6100kv)

Generating Links

TrackStar 1/18スケール7.5Tブラシレスパワーシステム(6100kv)

価格:

Now save 節約 ¥0.00 ¥0.00

¥7,741.91
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9052000007
送料無料したい? クリックする こちらへ 詳細情報を参照する

TrackStarのパフォーマンスは、今でコンボパッケージを選択することは容易で来ます!

オン・セミコンダクタのMOSFETの高速シリコン・ラボラトリーズMCUと高品質を使用してTrackStar 18A ESCは、高品質、まだ手頃な価格の車のESCの中での新しい標準を設定します。インテリジェントMCUロジックとTrackStarシリーズのESCは非常に精密なバックモーターからの制御と位置決めフィードを起動可能にします。品質4極モーターを組み合わせた、これは非常に滑らかなスタートアップと加速とトルクに変換します。

Turnigy TrackStar 18A ESCはまた、通常、このサイズのESCには見られないプログラミングオプションのホストを誇り、Turnigy TrackStarのプログラミングカード経由で簡単にプログラムすることができます(別売)

ESC仕様:
続き電流:18A
バースト電流:25A
車のサイズ:1/18
バッテリー:2-3セルのリポ/ 4-9セルのNi-XX
L-BEC:5V / 1A出力
モータータイプ: センサレスブラシレス
サイズ:30×26.1 X 13.8ミリメートル
重量:(ワイヤを含む)26グラム
モータープラグ:3.5ミリメートルの弾丸の種類
バッテリープラグ: 必須
オン/オフスイッチ: はい
リバース: はい

モータ仕様:
オン:7.5Tを
KV値:6100KV
ポーランド:4
直径:21.5ミリメートル
モーターの長さ:37ミリメートル
2ミリメートル :軸径を拡張
延長シャフトの長さ:11±0.5ミリメートル
重量:60グラム
ロードする@ 7.2Vいいえ:2.7A
最大電流:40A
抵抗(Ω):0.021Ω
バッテリーの範囲:2〜3秒7.4V〜11.1V
動作温度:80°
最大温度130°
適当な車スケール:1/18
適当なESC:25A
積層の厚さ:0.2X20mm

注:
私たちは3Sで、このモーターを実行している場合は、あなたのギアを減らすことを示唆しています。

  • Trackstar 1/18 Scale Brushless Power System
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

colton | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 07, 2015

I bought this motor and ESC Combo and after a few days of use I noticed the motor gets really hot but I didnt think anything of it at the time.(Specs say 130 degrees) After a few hours of use is smoked the motor and fried the esc afterwards. very disappointed.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 10, 2015

I installed this system into my 1/16 TR-V7 with a 17t pinion. Screw holes match, no modification needed. Very compact, fast and fun. Almost too much power, needs lots of throttle control.

RC Roller | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 21, 2014


Turnigy 1/18 4WD Mini Stadium Truck TrackStar 1/18th Scale 7.5T Brushless power System (6100kv) = "HOLY CRAP"

did not come with proper mounting screws and screw for the mini stadium truck did not fit this motor other than that "HOLY CRAP"

Emanuele | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 28, 2014

After a few minutes using 3s lipo the engine is cooked and I broke the rotor. The motor and esc go to 3s why I broke everything ??? The engine was really strong,just insane !!!

sbstn | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 13, 2014

Using this on the 1/18 stadium truck. Much much better than stock, ESC allows really nice control, it is much more linear and easy to program. Motor is fast and powerful. Good performance on 2S. You will need 2.5mmx~7mm screws for mounting the motor (together with blue loctite), and a XT60 for the ESC.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 13, 2014

Fitted this in my RC18MT along with a Turnigy 2.2A 2S Lipo and god it shifts! Easy to install although could be supplied with a couple of 2.5mm screws to help mounting. The std size on the RC18 is 3mm so had to find two small screws! Not the End of the world though so still 5 stars, especially for the price!

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 01, 2014

the best combo for use with my 1/16 car from turnigy

trackstar is the best!!!!

Jure | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2013

This is very good system and very easy to install in to your car/boat.
I am using it in a boat and it responds really nice with 3s Li-po.

unclestumpy | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 30, 2013

Wow I installed this into a Team Losi Mini T 1/18, when the orig ESC died the replacement was $45 at my local Hobby Shop. The only problem is that I now have to replace the Spur and pinion because the orig wont stand up to the massive torque. It is Fast and responsive and has turned a paperweight into a fun RC Thrasher!!!!

BTW It comes preset to Lipo mode,

shane | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 02, 2013

put this in a hsp 1/18 buggy running a 2cell 70c 2200 lipo goes like holy hell great motor and esc combo

  1. 1
  2. 2
  3. 3
顧客ファイル
Losi mini t graphite Download [296]
Losi mini t graphite Download [288]
Home made mini t graphite Download [269]
Losi mini t graphite 3s lipo Download [280]
1/8 vs 1/10 vs 1/18 Download [222]
Scale stack Download [261]
Losi mini-t graphite Download [296]
Losi mini-t graphite Download [288]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!