TrackStar 380センサレスブラシレスモーター3800KV

• Overall
• Quality
• Value

As expected

Apr 28, 2021

Works great, currently have the 3200kv version installed in my custom scratch built rc. The 3200kv will pull the tires at about 20mph if i can keep it straight, dont think i need the extra 600kv but i wanted it. Still yet to install but if it works anything like the 3200kv it should be psycho. As previously mentioned has no flat side so you will have to grind your own, i recommend going slow, and only grinding what you need so your gear wont try to slide back on shaft. i run it in 3d printed gearbox, gets warm after about 15 minutes of abuse but nothing serious. Anything more then 3 or 4 lbs i would go for a bigger motor, but this works great for my application.

• Overall
• Quality
• Value

Bought for Bad Bug

Jan 09, 2019

Does the job. does not have a flat side to anchor pinion, but this has not proved an issue as yet. Have run on 2S, 3S, and 4S. Does get hot and I would recommend a heat sink/fan if you are using in an rc car.