サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Trackstar 540サイズ4極4250KVセンサードモーター

Generating Links

Trackstar 540サイズ4極4250KVセンサードモーター

価格:

Now save 節約 ¥0.00 ¥0.00

¥7,780.82
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9192000121-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

Turnigy TrackStarセンサ付きブラシレスモータは、優れたパフォーマンスを提供します
信じられない価格!Trackstarシリーズモータは高い今日で使用するために最適化されています
電力、1/10スケールのレーシングトラック、車とバギー。

4極モータは、あなたの即時の加速を減らすが、より多くのトルクを提供し、改善されました
高速化のために連動されている重い車のための理想的であるトップスピード、。

品質アルマイト処理CNCモーターを搭載することができ、手巻き、高純度の銅巻線と
強力な焼結ネオジム磁石は、この口径のより良い価格のモーターを見つけることができません
どこか他の!彼らはまた、微調整を可能にする調節可能なタイミングを備えています
あなたの乗り心地のパフォーマンスセンサーは、滑らかなスタートアップや加速を保証しながら。

TrackStarブラシレスモータは、1/10の車、トラック、バギーのための偉大なアップグレードを行いますか、
540サイズのモーターを使用していない何か。

特徴:
•優れたトルクと低速ドライバビリティのためのセンサーベース
•調整可能なタイミング
•任意のセンサ付き/センサレスESCに対応
•CNC機械加工ビレットT6アルミニウムモーター缶
•高純度銅巻線
•ハイパワーはんだタブ
•強力な焼結ネオジム磁石
•精度は最大エネルギー変換のために設計しました

仕様:
KV:4250KV
最大電流:55A
最大出力:610W
アイドル電流:2.1Amp 0.0057ohmを
シャフト:17ミリメートルXø5mm
重さ:195グラム
推奨ESC:80A
細胞数:2-3s Lipoly
ボルト穴の間隔:25ミリメートル&25ミリメートル
接続: 直接はんだ付け

注:センサーケーブル付属します

  • KV ( RPM / V ) 4250.00
  • 最大電流( A ) 55.00
  • 抵抗( MH ) 6.00
  • 最大電圧( V ) 11.00
  • 電力( W ) 610.00
  • シャフトA (ミリメートル) 5.00
  • 長さB ( mm)の 53.00
  • 直径C (ミリメートル) 35.00
  • ことができます長さD (ミリメートル) 48.00
  • 総丈E (ミリメートル) 71.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

pecky38 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 16, 2015

Very good motor. I pair it with TrackStar Gen 2 120A SCT sec and they give my SCT plenty of power. Very smooth both low and high speed. I waterproof both with varnish (especially the sensor component) and I can dive my SCT into water without problem. I currently tested it up to 80km and planned to test it >100km with a higher pinion gear. I added a heat sink (151000014) and the motor temperate is around 60'C in a sunny day with ~32'C air temperature. So a cooling fan is recommended if you want to give it a very tough job and I believe it should handle well too! 100pcnt recommended.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 17, 2014

mmmmmmmmmmmmmmmmmmmmmmmmmm

Chubbs | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 04, 2014

What a monster of a motor. I installed this in a Turnigy Trooper with a 120A ESC, and geared down to an 11T pinion (from 14T stock) expecting to get a small but noticeable speed boost. Instead, I got a 4wd semi-guided missile that's nearly impossible to control for any reasonable person. the truck is spinning all 4 tires on pavement for at least the first 40 feet, by which point it's probably going 45mph (a guess) and still pulling hard. If you are a basher, this motor is great (though I suspect the trooper's durability may suffer due to the increase in crash energy). But if you're a racer, I think most people will find this motor is too much for use on a smaller, indoor SCT track. I'll be dialing my throttle setting back to 60pcnt or so just to maintain control around the track.



Also of note, this motor does not actually fit the trooper without modification to the heat sink/motor mount, due to the location of the motor lead wire soldering pads. It's a 5 minute fix with a dremel tool to cut up the heat sink.



So other than too much power (which I never thought I'd say, ever), and the mounting difficulties which don't seem unusual,this motor is great so far. 5 stars for now, subject to change if the motor blows up or something.

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!