サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy 1/16 4WDナイトロレーシングバギーエンジン(実行する準備ができました)

Generating Links

Turnigy 1/16 4WDナイトロレーシングバギーエンジン(実行する準備ができました)

価格:

Now save 節約 ¥0.00 ¥0.00

¥20,220.06
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9249000748-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

その小さなサイズにだまされてはいけません。これは深刻な1/16分ニトロレーサーです!

我々は、この偉大な小さなニトロバギーを取り、アップグレード0.07エンジンであっても、より良い、それを作りました! Turnigy 1/16 4WDナイトロレーシングバギーは現在、より多くの電力と高いトップスピードを提供しています、ちょうどあなたがあなたの力空腹の食欲を満たすために必要なもの!

0.07のCIニトロエンジン、チューニングされたパイプ、シャフトドライブ四輪駆動を開始引っ張る作られた日本で始まる - スチールシャフトやディスクブレーキと、この小さなバギーは、すべてのボックスを刻みます。調整可能なアッパーコントロールアーム、ショックアブソーバ支点、ショックアブソーバープリロード、リアサスペンションのロールセンターとダウン調整可能な停止:それは、次のような箱のうち調節の大きな範囲を持っています。

画像の上に簡単に見には、サスペンションアーム、ショックマウントと隔壁として作り付けの耐久性やオーバーエンジニアリングコンポーネントのデモンストレーションを行います。これは、より多くの1/16分より1/10スケールレーサーのように構築されています!

この車は完全に高トルクステアリングサーボ、スロットルサーボと全ての結合プリインストール/調整で構築され、実行可能な状態に到着しました。含まQuanum 2.4GHzの3CHの無線システムは、同様にプリインストールされています。わずか8 AAA電池、燃料、グロープラグドライバを追加し、あなたの準備ができて岩に!

仕様:
サーボ:15グラム高トルクマイクロ
ドライブ: フルタイム4WDを、ツイン差動
:187ミリメートル
身長:101ミリメートル
トラック:191ミリメートル
長さ:280ミリメートル
ホイールベース:177ミリメートル
ギア比:11.2:1
エンジン:0.07 CI
地上高(F / R):20〜30ミリメートル

必須:
8つのx AAA電池(受信機と送信機用4用4)
ニトロ燃料
グロープラグドライバー

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Kalango | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 31, 2015

I agree with you. The car mechanics is very interesting. But to start its motor, that's a nightmare. I even bought on ebay a kit to replace the pull starter by an outside electric starter, and I installed it. It worked once or twice, and again the same problem: the one-way bearing stops working. I did lot of times lubricated this bearing, as the manufacturer argues. At last, I gave up. The car is just taking place in my garage. What a pit. This bearing kills this magnificent car. Hobbyking should fix it.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 27, 2015

This buggy is so fun to play with! I like playing with it!

Jerre | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 21, 2015

Dont waste your money on it. I bought one for a christmas gift and it wont run. I got it started one time and now it doesnt start anymore. I had to order some parts for it and it takes forever to get it. I will never buy for this site again.

Riccardo | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 05, 2015

This little car is far from being perfect. Out ot the box it has 2 problems:
1- The springs of the clutch are too delicate and mine broke during the break in process. You can easily replace them with standard 1/8 clutch springs.
2- the one-way-bearing of the pull starter will stop working after 6/7 tanks (if you are lucky). But simply cleaning the bearing will solve (temporarily) the problem. I clean it with what in Italy is called "Svitol".

After solving those problems... The car is really fun to drive! Apart from the pull starter issue, the engine is really reliable and starting it is the last problem you will have with this little buggy.

Final thoughts? I don't recommend it as the first rc car for a guy new for the hobby,
in general smallest is the car, bigger are the problems.
But, if you have some experience with rc cars, you can have plenty of fun with the turnigy 1/16 nitro buggy!

Mikael | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 12, 2015

Very well designed buggy. But has some issiues when arriving in the box!!
Three of the shocks were empty of oil?? One clutchspring broke during the first tank. Resulting in hard starts and no idle. Worst of all was that the steering servo cable was pinched in between the radiobox and the lid so bad that it resulted in a short between the signal wire and positive. The reciever jammed at full throttle during the second tank ending at full speed on my neighbours rear wheel of his parked car. Front suspension in fragments!!!
Dont get me wrong i still recommend this awesome buggy. But please check it from front to back before startup!! Best regards Mike

__LCZ | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 26, 2014

The Rc car is fantastic. The one way ball bearing is a piece of shexx. It is broken in a couple of starts...

WON GI | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 22, 2014

.
.
.

Rafael | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 08, 2014

Otimo carro para iniciantes. Realizando uma boa regulagem no carburador ele se torna um excelente carro.

Brad | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 05, 2014

This little beauty is more like a piece of jewellery than a buggy. Very well designed, with precision befitting it's scale. A little hard to start, but fierce when it gets going. With a little bit of carving, trimming, and bending, ground clearance can be maxed out for use in grass, provided you have a drawer full of HSP shocks to work with (cheap) like I do. The stock shocks are actually quite good, but won't give that extra 10 mm of travel that the suspension will easily accomodate. Put a flap of vinyl bumper sticker under the shock piston for good rebound damping.

MrMous | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 08, 2014

well... its loud for one, and pretty quick. Upgrade parts if you can.

  1. 1
  2. 2
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!