サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy 2211ブラシレスモーター1700kv

Generating Links

Turnigy 2211ブラシレスモーター1700kv

価格:

Now save 節約 ¥0.00 ¥0.00

¥1,951.86
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
T2211-1700
送料無料したい? クリックする こちらへ 詳細情報を参照する
外形寸法:(シャフト付き)24ミリメートルX 23ミリメートル、34ミリメートル
重量:(コネクタ含まず)19グラム(kv1700)
シャフトの直径:2ミリメートル
フロントシャフトの長さ:9ミリメートル
積層厚さ:2ミリメートル
マグネットタイプ:45SH

最大のパフォーマンス
電圧:2S
最大電流:3.5〜6A / 20S
プロップ:7x3.5〜8x4.3
プル:180〜250グラム
150グラム屋内チラシのため。


データファイルをダウンロードします。
TURNIGY MOTOR DATA
  • KV ( RPM / V ) 1700.00
  • 最大電流( A ) 6.00
  • 抵抗( MH ) 0.39
  • 最大電圧( V ) 13.00
  • 電力( W ) 60.00
  • シャフトA (ミリメートル) 2.00
  • 長さB ( mm)の 23.00
  • 直径C (ミリメートル) 22.00
  • ことができます長さD (ミリメートル) 8.00
  • 総丈E (ミリメートル) 33.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 02, 2013

meiner war leider defekt! :-(

Dongskie | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 17, 2013

Perfect replacement for the Mini J3 Cub motor also here on HobbyKing.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 22, 2012

Luft schn ruhig und zieht wie ein Groer. Pull-Angaben sind korrekt.

Marek | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 01, 2012

Motor does not work. I burned out ESC. With another ESC motor just try to turn. After few seconds motor smoking. I tried change timing and also smooth start but without success. Completely wrong! They do not have output quality process in a factory?

DodgeHobby | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 16, 2012

Cracking little motor

Jason | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 30, 2012

I like this motor (and its smaller cousin the T1811-2000). Have been doing some static bench tests and here's some info so far. Hope it's useful to others:

prop:Amps:Volts:Watts:Thrust(grams)
7x3.5:2.7:7.76:20.9:133
7x6:3.5:7.57:25.7:119
7x6:4.x:7.x:?:140 <- (put it here real quick to see thrust, but didn't keep it long enough to see other numbers as I didn't want to risk over current. After a few seconds at this amperage the motor was very very slightly warm to the touch)

Of the limited set of props I tested I'm going with the 7x3.5 as it keeps the amps down and, hence, flight times should be longer. I'm targeting a 3D foamie for this that has a AUW of around 93 - 105 grams.

Thanks.

Narat | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 18, 2012

Neat, and small electric motor.

Power is good.

Kevin | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 12, 2012

I bought two of these for the tail of my cp heli. After installing the first one, i found that the set screws at the base did not properly fit in the holes. The second one was fine, so i guess i have one for spare parts. Works good, i'm gunna try the 2300kv next. Yes, i will buy two (just in case).

WebEng | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 26, 2011

I got a love/hate with these motors. I've bought 4 so far and use them exclusively in the Bonsai wing where they work great on a 2s 860ma Zippy with a 6amp Plush speedy. Flight times are well over 20 mins and gentle flying gets me to about 40 mins . With this setup, everything is almost cold to touch at end of flight. Won't quite hover though, but I reckon 3s would do it easy.



Here's the bad. The wires coming out of the motor are simply the ends of the windings which are twisted together. There is no support for the wires and since the windings are solid core (1 strand only), they cannot handle much flexing before they break. They're a real @ to solder back in place as they tend to break off at the base leaving almost no wire to work with. As I'm using these on Bonsai wings, there's not much protection and after a while, they will all fail unless you take some "Anti-Wire Flexing" actions to keep them safe.



Working with the Plush 6A ESC, they tend to work great when they're brand new, but after a week or so, they start cogging at start up. This seems to be motor related because if I connect another motor - no cogging. Mind you, sometimes they cog from brand new too. I suspect it's to do with resistance build up from flexing. I'm going to persist with these motors as I really like them when working well and will make more mods to make them reliable. Todays mod will b

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 10, 2011

bem pequeno e rpido. parece ser bom

  1. 1
  2. 2
  3. 3
顧客ファイル
elisa 180 x 90 fi 2 mm Download [150]
elisa 180 x 90 fi 2 mm Download [150]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

Related Tags