合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy 250サイズ1806-2280kv(4 CW / CCWのセット)

Generating Links

Turnigy 250サイズ1806-2280kv(4 CW / CCWのセット)

購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9045000025-0
送料無料? ここを クリック 詳しく知ることができ!

心の中で250サイズのマルチコプタービルダーを使用して設計、Turnigyはより良い値のための4つのユニットのフルセットとしてその人気1806-2280kvモーターをパッケージ化しています。改良されたベアリングにより、CW / CCWシャフトや弾丸ナットは、これらは、品質とより多くのよりも、仕事をするモータの堅牢なセットです。

これらのモータはほとんどのフレームおよび5~6インチの範囲内で最も人気のある小道具に適合するように適応されている5ミリメートルモータ軸を収容するためのハードウェア実装の二組が供給されます。

これらの小さな発電所モータは素晴らしいパフォーマーとして認識されているので、あなたは、あなたの支出に見合う最高の価値をしたい場合は、このパッケージはあなたが探していた取引があります。

特徴:
•4本セット
•予算が気に
•ブレットナット
•CWとCCW回転

仕様:
サイズ:1806-2280KV
重量:(モーターあたり)19.2グラム
電圧:2〜3細胞
プロップシャフト:5ミリメートル
回転:2 CW 2 CCW
取付:12x16mm(ロングとショートのハードウェアが含まれています)
最大推力:460グラム

  • KV ( RPM / V ) 2280.00
  • 最大電流( A ) 10.00
  • 抵抗( MH ) 0.00
  • 最大電圧( V ) 13.00
  • 電力( W ) 0.00
  • シャフトA (ミリメートル) 5.00
  • 長さB ( mm)の 15.00
  • 直径C (ミリメートル) 23.00
  • ことができます長さD (ミリメートル) 8.00
  • 総丈E (ミリメートル) 25.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • Turnigy EMAX Motor Set
ビデオをアップロードする

ビデオをアップロードするには登録してください サインイン または 新規登録

レビューを書くために登録してください サインイン または 新規登録

Marko | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Sep 25, 2016

Great motors for 250 size quad.Great punch paired whit Afro mini 20 amp esc's. Small but powerfull!

jkosmides | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Aug 07, 2016

I was disappointed with these motors because 3 out of 4 hesitated and performed inconsistently. Admittedly, it was my first quadcopter build, but after checking and rechecking the solder work and everything else on my quad, I swapped them for Emax motors and had no problems. Later, after a crash and destroying a motor, I put on a KingKong motor and it worked fine - so my point is that I know how to solder and build my quad but these motors would jitter and just not run very well consistently. I can't recommend.

Bvbike | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Apr 06, 2016

Great little motors... installed on a Kingkong 188 frame with tri-blades 4 x 4.5 genfan props... powerful little setup. Might buy another set to fit on a Diatone 180 Lizard. Recommended for sure. Cheers!

Dave | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Feb 19, 2016

These motors are resilient quality tough little micro motors!!!
Used for TriCopter build >25 crashes a couple where prop completely broke and yet these motors keep on ticking. After about crash 15 I had to replace motor with last 4th motor.

However just recently took motor apart and cleaned it and now the motor once declared dead is alive again...and so I have my reserve 4th motor for when my next spectacular but terrible Tricopter crash!

Ran Haveshush | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Nov 08, 2015

Great little but by no means surprisingly powerful and efficient motors.
I run them on a H-King 250 frame with a Zippy 2200mAh 3S lipo (AUW 530g),
And the quad is fast and agile with a flight time of about 14.5 minutes.
BTW: The motors doesn't even get worm...

Here is a video: https://youtu.be/7cmYPz0gV_0

Reptilianhybrid | 確認済みの購入者

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Nov 08, 2015

these motors are awesome they spin really fast , and make my quad go "vroom vroom

Stephen | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Aug 27, 2015

These are pretty good entry motors for 250 sized quads. All four of mine worked and I like the CW/CCW motors as it helps keep the props on tight(if you put them on correctly). I have ran these on 5030, 5040 and three-bladed 5045's all with success. My 250 weighed around 550-600 grams and with 3-bladed 5045 the vehicle performed great. I don't think these motors have enough power to lift gopro additionally without severe performance hits. I'd buy them again!

Mark4 | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Jun 21, 2015

Motor #1 Kv test out of the box 1830Kv on 3S. more to test I hope they are all the same. looking at them I think the other 3 will spec out at 1830 as well. Only 450Kv short of the advertised spec. Nice motor otherwise for the price. If they all spec out at the 1830 I think I will still be happy with the power on the Dart 250. It's the first 250 FPV'er so I don't need to go fast. "It flew fast so it crashed fast" Might be disappointing for someone who has flown real 1806-2280Kv motors though.

remauled | 確認済みの購入者

  • Quality
  • Value
  • Overall

Customer Rated

Dec 10, 2014

Ran mine on mini thorax (hex) and works great on 5x3 gemfan on both 4s and 3s with 12A AFRO.



Motor is cool to touch at landings and sounds very healthy.



A great product, though i've to admit my setup on minihex with NAZA Lite has high speed (AIL) oscillation on fast forward flights (no fault of motors).

Skybraker88 | 確認済みの購入者

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Dec 08, 2014

Great little motors they're fast and pretty tough, crashed'em flying fast and low. Got them on the new Hobby King fpv Gost Edition Quad with the 12amp Afro esc and the Acro Naze32 flight controller.

  1. 1
  2. 2
ファイルをアップロードする

登録してファイルをアップロードする.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!