Turnigy 28から26-CQ 1300Kvブラシレスアウトランナー

• Overall
• Quality
• Value

Customer Rated

Jun 21, 2011

Runs great on my GP Extra330sc foamy, unlimited power. I use a 9*6 apc style, 10A at 11.1V. Great quality, price an POWER. thx HobbyKing!!!!!!!!!!

• Overall
• Quality
• Value

Customer Rated

Apr 15, 2011

buen motor, se recomienda no usar una helice mayor de 9X6 para mantener el consumo un oco bajo o el motor estaria forzado.
usado en un aeromodelo de 400g y vuela relajado sin problemas aun si se le pide torque lo entrega sin problemas
un motor bueno

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 22, 2011

Skvely motor, kamos ma tento motor ve svem letadle,rozpeti asi 880mm a delka asi 650 a musim rict,ze to jsou prdy,opravdu velmi vykonny moturek k tomu ESC 15-20Amp a nema to chybu

• Overall
• Quality
• Value

Customer Rated

Dec 28, 2010

Tested a GWS 7x6 prop with 3S 1000mAh battery. Turns just over 9000 RPMs pulls just less than 10A and shows just over 100 watts. Will be trying it out in a 32" KESL wing.

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 24, 2010

this comes with very long screws for the propsaver

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 23, 2010

nice motor for 400g plan

• Overall
• Quality
• Value

Customer Rated

Aug 14, 2010

Very good motor. I have about 6 flights on an Elictricfly RC Universe Bi Plane and have pure verticle performance with an 8x3.8 prop and a Rhino 610 3C battery. Will certainly buy again when I build another foamy.

• Overall
• Quality
• Value

Customer Rated

Jun 28, 2010

Installed on Yak 54 flat foam AUW 9.5 oz with 3S1P Lipo 1000 mAh with APC prop 8x4. After a flight of 12 minutes the motor was well done. Melted the windings and never ran again. Had good power while it lasted

• Overall
• Quality
• Value

Customer Rated

Apr 21, 2010

excellent product...light weigh and suitable for foamies.

• Overall
• Quality
• Value

Customer Rated

Feb 07, 2010

Continuation optimistic, I tried both 7x4, and 8x4 props from GWS, Master Aircrew and APC. The motor does not have enough torque to turn an APC 8x4 to a workable RPM, it only got to 7900 RPM and 13oz (364g) of thrust. The best combination was the GWS DD8040 (8x4) prop. With the GWS DD 8x4 prop I got 10500 RPM, 13.5amps and 19oz (532g) of thrust with a Turnigy 3 cell 25C 1000mah battery and a Turnigy plush 12amp ESC.