新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • USA

TURNIGY 28-30-azj 14A 1100Kvブラシレスアウトランナー

TURNIGY 28-30-azj 14A 1100Kvブラシレスアウトランナー

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
89 g
SKU:
TR28-30-azj
商品概要

モデル:TR-28-30-azj
最大のEff:12A
最大負荷:14A
KV:1100
重量:57.9gr
プル:400-900gr
プロップ:10x5か10x6
電圧:6〜10V
無負荷CURRません:.9A
サイズ:30ミリメートル

推奨BESC:30A

Product
Specifications

追加情報

  • 単位:
    TR28-30-azj
  • Brand:
    N/A
  • 重量(g )
    89.00
  • 長さ
    0.00
  • Width:
    0.00
  • 高さ:
    0.00
  • KV ( RPM / V )
    1100.00
  • 最大電流( A )
    14.00
  • 電力( W ):
    0.00
  • 長さB ( mm)の:
    27.00
  • ことができます長さD (ミリメートル)
    15.00
  • 最大電圧( V )
    10.00
  • シャフトA (ミリメートル):
    3.00
  • Unit Weight (g):
    57.9
  • 直径C (ミリメートル)
    28.00
  • 総丈E (ミリメートル)
    55.00
  • 抵抗( MH ):
    0.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Trs fragile, le support de l'axe est simplement coll dans la cage, et ce parfois de travers
L'axe est trs fragile, facile a plier.

Sur 5 achets, 2 bons, 1 bruyant, 1 dsax et un dont le filtage tait inutilisable.

Very fragile, the support of the shaft is simply stuck in the body, and sometimes it's awry
The shaft is very fragile, easy to bend.

Purchase 5 of these motors, 2 are good, 1 is noisy, 1 has an unusable filtage of the shaft

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's very nice finish and good quality. The motor is not bad but the shaft is too fragile. After use for sometime and few time the bearing make noise. It's pity I can't find the shaft replacement part
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased 5 of these and installed 4 on a Quadcopter. I am using 10x6 props and they pull it off the ground at less than 1/2 throttle.
The quadcopter weight is 3.5 lbs. Lots of extra power available and no problems with any motor. Only part I changed is the two mounting bolts which hold the motor to the mount. They are hex head set screws and I replaced them with regular hex head screws. They draw about 9 amps each at 1/2 throttle.
Allen
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tento motor je za tu cenu dobr,len nalisovanie driaka hriadela je dost chabe.Pri tvrdom pristati nemusi vzdy vydrzat.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little motor, tons of power am using it on a super cub with aelorons added with at 30A blue series ESC from HK and a 10x8 prop. They plane will go verticle if I need it to. Motor is just amazing for such a tiny package. I also ran a 10x6 prop but jumped to the 10x8 to see how the ESC would handle it and it barely gets warm. For the money you can't beat this motor. I am buying more.......
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
empeado en un avion de 700 gr con una lipo 2S de 2200 y esta sobrado de potencia
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
28/02/2011
comprei este motor para usar em um piper 1,2m de env., o motor bastante forte e econmico, alm de ser uma boa opo a um custo baixo!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Looking for a small engine and verry powerfull,here it is:TURNIGY 28-30-azj 14A 1100Kv,but be verry careful,to not hit him on the ground buecouse was put him on my new prototip plane,made by my self and the engine has suffered somme crashes and the bearings now are not centred and the engine now make a nasty sound,so be carefull and do not make mistakes like me,i want to say that the engine is werri well made,and the shaft is ok,only two times the shaft hit the ground but is ok.....verry resistent.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I tested this motor on a biplane with 25 A SS ESC, 10 x 3,8 SF prop and 1 800 mAh Zippy. Total weight ~ 700g. Not enough power to hover. The motor is hot. I will try a 10 x 4,7 SF prop. I am sure the temperature will be too high.

I will do individual bench tests to log more data.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This little motor works great in my Slo-V....even on a 2s it pulls very strong!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。