New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

55/64ミリメートルのためのTurnigy 2815 EDFアウトランナーの3500kv

55/64ミリメートルのためのTurnigy 2815 EDFアウトランナーの3500kv

Shipped From:
  • USA
  • Global

Now save save AU$0.00 AU$0.00

AU$15.00
Alert me
ステータス:
在庫切れ!
重量:
110 g
SKU:
T28151C3500
WANT FREE SHIPPING? Click here to find out more!
55/64ミリメートルのためのTurnigy 2815 EDFアウトランナーの3500kv
仕様:
3500 Kv-
寸法:51のx 28ミリメートル
シャフト:2.3 / 3.0ミリメートル
電圧:11.1V
重量:74グラム
現在の無負荷:1.9A
無負荷回転数:38460
負荷電流:17.8Aを
ロードRPM:32780
スラスト:485グラム
取付穴ボルトサークル:18ミリメートル
MTG。ホール数&サイズ:4×M2.5
 
2軸、2.3&3.0ミリメートルが含まれています
  • 単位 T28151C3500
  • Brand Turnigy
  • 重量(g ) 110.00
  • 長さ 90.00
  • Width 45.00
  • 高さ 55.00
  • KV ( RPM / V ) 3500.00
  • 最大電流( A ) 1.96
  • 抵抗( MH ) 36.00
  • 最大電圧( V ) 12.00
  • 電力( W ) 19.60
  • シャフトA (ミリメートル) 3.00
  • 長さB ( mm)の 48.00
  • 直径C (ミリメートル) 28.00
  • ことができます長さD (ミリメートル) 17.00
  • 総丈E (ミリメートル) 64.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have a put a post in the forum with stats for this motor a few of its brothers and sisters but ill put them here too. Motor is good quality and I think will run on 4S fine if kept under 500W.

3S 64mm 5 Blade Fan 19A, 220W, 11.7v 450g thrust (in plane)

4S 64mm 5 Blade Fan 30A, 450W, 11.7v 640g thrust (in plane)



3S 64mm 6 Blade Fan 19A, 216W, 11.45v 480g thrust (in plane)

4S 64mm 6 Blade Fan 29.5A, 430W, 14.8v 640g thrust (in plane)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have a put a post in the forum with stats for this motor a few of its brothers and sisters but ill put them here too. Motor is good quality and I think will run on 4S fine if kept under 500W.

3S 64mm 5 Blade Fan 19A, 220W, 11.7v 450g thrust (in plane)

4S 64mm 5 Blade Fan 30A, 450W, 11.7v 640g thrust (in plane)



3S 64mm 6 Blade Fan 19A, 216W, 11.45v 480g thrust (in plane)

4S 64mm 6 Blade Fan 29.5A, 430W, 14.8v 640g thrust (in plane)

I bought 2 of these for a GWS-262. I use 2 25A tower pro ESCs and a turnigy 2200mah lipo. Its too much for the lipo, it gets hot and puffed out. I'll try a 2600 mah next. Great motors, lots of power. Great value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 2 of these for a GWS-262. I use 2 25A tower pro ESCs and a turnigy 2200mah lipo. Its too much for the lipo, it gets hot and puffed out. I'll try a 2600 mah next. Great motors, lots of power. Great value.

Looks are good, some flaws.

I had to rebalance both of my motors, I needed lots of CA to balance them but after balancing they ran fine.



Axles supplied with motors were 2.3mm , 3mm and 3.3mm , but 3.3 mm will not fit because the hole is already almost too tight for 3mm axle!

I had to use brute force and hammer to get 3mm axle of and install 2.3mm.



Real life performance will tell more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks are good, some flaws.

I had to rebalance both of my motors, I needed lots of CA to balance them but after balancing they ran fine.



Axles supplied with motors were 2.3mm , 3mm and 3.3mm , but 3.3 mm will not fit because the hole is already almost too tight for 3mm axle!

I had to use brute force and hammer to get 3mm axle of and install 2.3mm.



Real life performance will tell more.

Motor appears to be of good quality. On a GWS 64mm, 6-blade fan, Hyperion 3S 2500mAh 25C, Phoenix 25A ESC-low timing, I was pulling 22 amps and 239 watts at 11 volts WOT. Sorry no thrust data, but holding the unit in my hand produced impressive thrust for a 64mm fan. The website says 17.8 amps as 'load current'. If I understand that to mean max continuous, than a five blade fan may be better. No thrust data, but impressive for 64mm unit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor appears to be of good quality. On a GWS 64mm, 6-blade fan, Hyperion 3S 2500mAh 25C, Phoenix 25A ESC-low timing, I was pulling 22 amps and 239 watts at 11 volts WOT. Sorry no thrust data, but holding the unit in my hand produced impressive thrust for a 64mm fan. The website says 17.8 amps as 'load current'. If I understand that to mean max continuous, than a five blade fan may be better. No thrust data, but impressive for 64mm unit.

Awesome motor, 540W on peak with a 5*5 prop and a 3S 1600 35C hyperion.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome motor, 540W on peak with a 5*5 prop and a 3S 1600 35C hyperion.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!