サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy 3560-1650 90ミリメートルEDFブラシレスファンモータ

Generating Links

Turnigy 3560-1650 90ミリメートルEDFブラシレスファンモータ

価格:

Now save 節約 ¥0.00 ¥0.00

¥6,236.95
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9244000011-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

あなたはスピードの必要性を持っているかだけで、より多くのタービンのようなヘアドライヤーをどのように90ミリメートルEDFの音を愛しています! TurnigyはあなたのためのEDFモータは、35シリーズアウトランナーは心の推力で一つになりました!

3560-1650は、1片に設計され統合された空力合金テールコーンと冷却ファンを持っています。大規模な5ミリメートルシャフトは、安全安心の無料羽根車をインストールするための平らな機械加工を持ち、等しいサイズの11ミリメートルベアリングで支持されています!あなたはどちらかグースであるか、またはフィールドで実施マーベリック、しかし、一日の終わりにTurnigyの90ミリメートルEDFモーターはあなたが燃えるありませんすることができます!

仕様:
KV:1650
最大電流:53アンペア
最大電力:1900ワット
現在の4.6アンペアアイドル
抵抗:0.4 MH
シャフト径:5ミリメートル
重量:168グラム
推奨ESC:70Aまたはより大きい
細胞:4-6細胞 (lipoly)
取付:25×25ミリメートル
コネクタ:4ミリメートル

  • KV ( RPM / V ) 1650.00
  • 最大電流( A ) 53.00
  • 抵抗( MH ) 0.00
  • 最大電圧( V ) 22.00
  • 電力( W ) 1900.00
  • シャフトA (ミリメートル) 5.00
  • 長さB ( mm)の 65.00
  • 直径C (ミリメートル) 35.00
  • ことができます長さD (ミリメートル) 32.00
  • 総丈E (ミリメートル) 83.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

C Eric | 確認済みの購入者

  • Overall
  • Quality
  • Value

3560-1650 of limited use for EDF

Nov 28, 2016

Ran 6S with a Haoye 7 blade 90mm fan. After only brief periods of WOT the motor temp would continue to rise to unsafe levels. Temp was over 195F with approximately 30 WOT. this was pulling 83amps/1700watts in cold weather with a cold battery.This motor will fry if running 6S and a high blade count fan. It may be OK on 5S but then only good for a very light 90mm jet.

4stripes | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 08, 2016

When running a typical 6 blade (wemo midi style) 90mm EDF it only produces less than 1300watts peak at 54amps on 6S. Motor bell was restricted in cooling with its fairing hole so small. Removed fairing for better cooling yet it still reached 130F drawing only about 1250watts for a short period.Only would be good for a very light model on 6S. 7S would likely give better performance.

alibaba_1780 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 01, 2016

Turnigy EDF 3560-1650 90mm Brushless Fan Motor bike is great for jet,, I use in my home-made jet planes, power generated by the motor Turnigy EDF 3560-1650 90mm Brushless Fan Motor is unusually large, jet aircraft can lift with 4 kg

Richard | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 22, 2016

Used this motor with a ducted prop 180X200. Produced 22N static thrust with 80A using a Rotorstar ESC fed from 5000mAh 4S 30C battery. Nice motor when new with incredible power to weight.

The long thin case is prone to poling so very short life at full power. Poling so severe that one of the magnets was chipped.

EDWARD | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 18, 2015

Finally did some test on this motor. All on 6s.
full charged 40C 4400mah. EDF unit: flyfly 7-blade, esc low timing, ~85 A, motor got ~160F after 1 min full throttle
new 5000mah 40C at 22.9 V. EDF: flyfly 6-blade, esc high timing, ~65 A. ~1400W. motor got warm but not hot after ~10 sec. No thrust data for either. Would expect ~70A at fully charged 44000mah battery.
Seems decent motor. Will soon put on Freewing F-18 for a flight test.

guitarPlaya | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 29, 2014

I put this motor in my Fly Fly F-100 6s400090c flight pack and this motor makes this plane vertical right after takeoff!!
Get one!!

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー