サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy 3632ブラシレスモーター1200kv

Generating Links

Turnigy 3632ブラシレスモーター1200kv

価格:

Now save 節約 ¥0.00 ¥0.00

¥3,654.66
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
T3632-1200
送料無料したい? クリックする こちらへ 詳細情報を参照する
外形寸法:(シャフト付き)36ミリメートルX 38ミリメートル、54ミリメートル
重量:(コネクタ含まず)99グラム(kv1200)
シャフトの直径:4ミリメートル
フロントシャフトの長さ:18.4ミリメートル
積層厚さ:2ミリメートル
マグネットタイプ:45SH

最大のパフォーマンス
電圧:3-4S
最大電流:35〜40A / 20S
プロップ:10x5〜11x5.5
プル:1400〜1930グラム
1400〜1800グラム3D航空機用。




データファイルをダウンロードします。
TURNIGY MOTOR DATA

  • KV ( RPM / V ) 1200.00
  • 最大電流( A ) 40.00
  • 抵抗( MH ) 0.03
  • 最大電圧( V ) 13.00
  • 電力( W ) 340.00
  • シャフトA (ミリメートル) 4.00
  • 長さB ( mm)の 35.00
  • 直径C (ミリメートル) 37.00
  • ことができます長さD (ミリメートル) 14.00
  • 総丈E (ミリメートル) 53.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Gerard | 確認済みの購入者

  • Overall
  • Quality
  • Value

Excellent Motor/Great performance

Apr 26, 2020

I took a chance on this motor from the specs. Turned out great. I was able to change the shaft for a rear mount assembly. With a 41 oz. scratch built low wing plane, I am getting 270 watts of power with an 8 x 7 prop on 3 cells. Flight times exceed 7 minutes, but could go longer; I don't like to push motors/batteries to their limits.

Mikhail | 確認済みの購入者

  • Overall
  • Quality
  • Value

With a propeller of 262 X 150 mm, with a voltage of 11.4 V and a current consumption of 30 A, the thrust is 1.5 kg.

Dec 11, 2019

Good engine

Eric | 確認済みの購入者

  • Overall
  • Quality
  • Value

Good motors

Nov 19, 2019

These are good little motors for their size and price. I got two of them for a twin that I built. The motor shaft needed swapped so that I could mount them from the rear, but I have done that many times before so I went ahead and got these. The alan screws were so tight, and the hex head was so tiny that not even heating the bell around the screw could loosen them AT ALL. The heads just stripped. I ended up drilling them out, tapping the pin out and redrilling and tapping new screws into the bell. it was not a quick or easy process. Luckily everything stayed strait and the motors work really well now. But if you need to swap the shaft....beware

Bojan | 確認済みの購入者

  • Overall
  • Quality
  • Value

good

Mar 14, 2018

very good motor

croboki | 確認済みの購入者

  • Overall
  • Quality
  • Value

good

Mar 13, 2018

Strong and powerfull motor. Will buy again.

Napstr | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 23, 2015

Excellent quality - really powerful motor - great for 30 sized aircraft - spins a 11x5.5 or 12x6 with ease and provides great pulling power - perfect for 11-1200mm aerobatic aircraft

Chris | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 17, 2014

I got this motor for my Multiplex Fun Cub after bending the casing on another another motor when I reversed it.
This motor arrived wih abent shaft. I could tell before I put the prop on by the fuzzy appearance whn running and then by feelng the vibration.

Ralf | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 25, 2012

Ordentlicher und leistungsfhiger Motor. Zieht meine Pitts mit 1,5 Kilo bei

knapp 30 Amp. mit 10x6 Luftschraube an 3S zuegig in den Himmel. Die Glocke zeigt optisch eine minimale Unwucht, die Vibrationen halten sich aber in tolerierbaren Grenzen. Aber Achtung: Mein Motor war fehlerhaft montiert.

Die Welle war nicht weit genug durch die Motorglocke geschoben, so dass die Madenschraube, die als Verdrehsicherung in der Glocke sitzt, nicht auf der angeschliffenen Phase der Welle zu liegen kam. Da die Madenschraube nicht gesichert war hat sich beim 10. Flug die Welle samt Propeller nach vorne verabschiedet. Also vorsichtshalber kontrollieren.

nerijuso | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 23, 2012

Very good product. My place is fast enough with this motor. Maybe someone know what is replacement shaft for this motor? Has this shart hobyking? I was looking for it but I dont know which one will fit...

Graham helis | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 13, 2012

smooth power for the multiplex gemini

runs well on 11x7 prop

gets over 7 mins time out of it

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

Related Tags