サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy 4208 620kvブラシレスマルチローターモーター

Generating Links

Turnigy 4208 620kvブラシレスマルチローターモーター

価格:

Now save 節約 ¥0.00 ¥0.00

¥3,892.95
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
922000015
送料無料したい? クリックする こちらへ 詳細情報を参照する

あなたは、マルチローターのパフォーマンスを真剣にしている場合は、このTurnigy MULTロータモータよりもう探す必要はありません。ハイエンド45SHマグネット、高極数、カスタムモーターマウント、エクストラロングワイヤーで建てられ、このモータは、マルチローターのアプリケーションのために純粋に設計されています。

このモーターは、5ミリメートルシャフトを搭載し、さまざまなスタイルの小道具で使用するためのコレットスタイル小道具アダプタが含まれています。また、あなたのクワッドローターフレームで迅速かつ簡単にインストールするためのマウントボルトオンクロスが含まれています。

これは修正された飛行機のアウトランナーではありません。これは特に、マルチローターのアプリケーションのためにゼロから設計されました。

仕様:
KV:620rpm / V
缶のサイズ:45ミリメートル
シャフト:3.17ミリメートル(5ミリメートルプロップ実装用の小道具のアダプタが含まれます)
モーターマウント穴:16ミリメートル/ 19ミリメートル
推奨ESC:30A
定格ワット:180W
重量:79グラム
細胞数:3〜4S Lipoly
モーターワイヤーの長さ:390ミリメートル

  • KV ( RPM / V ) 620.00
  • 最大電流( A ) 30.00
  • 抵抗( MH ) 129.00
  • 最大電圧( V ) 15.00
  • 電力( W ) 180.00
  • シャフトA (ミリメートル) 3.18
  • 長さB ( mm)の 21.00
  • 直径C (ミリメートル) 42.00
  • ことができます長さD (ミリメートル) 8.00
  • 総丈E (ミリメートル) 32.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Antonie_Kruger | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 12, 2013

I bought 5 of these for a big H-quad project. Paired them with hobbywing 40A ESC's(Its what I had lying around). I did not use the supplied prop holder. Replaced the with prop holders that screws onto the shaft with a clamp screw. I use 12x4.5SF props on 4S battery. I use an APM flight controller and get around 12 to 15minutes flight time. I like the motors. They seem well made and balanced. Good enough for my application. The supplied prop adaptors suck, but the motor runs great. Thanks guys, great value for the price.

Dominik | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 27, 2013

Figured out the same issue as mentioned in the previous review. The prop holder is not very good designed. When testing the motor the prop went to the ceiling and broke.

Recommendation is to use loctite to glue the adapter to the shaft.

The price of the motor seems reasonable.

Also I figured out timing issues with the plush 30A controller using fast/medium/slow timing. In low speed the motor is stuttering in every timing mode of the controller.

Kyuhyong | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 18, 2013

Bought 4 of these motors to build quad with AQ600 frame.
Runs ok but one thing I would like to comment is about the included prop holder.
The holder does not hold the prop tight enough so that the prop turn a little bit. Also I noticed that the holder is not centered to the shaft of the motor. I see some vibration due to un-centered prop holder.

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!