新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global

インペラ3200kv /ワットTurnigy 480S BL Inrunnerモーター

インペラ3200kv /ワットTurnigy 480S BL Inrunnerモーター

QTY:

Now save save AU$0.00 AU$0.00

AU$33.46
Stock:
重量:
149 g
SKU:
D480S-3200

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要
外形寸法:(シャフト付き)47ミリメートルX 30ミリメートル、60ミリメートル
重量:(コネクタを含まない)109グラム(kv3200)
シャフトの直径:4ミリメートル
フロントシャフトの長さ:13ミリメートル
積層厚さ:2ミリメートル

スペック。
バッテリー:3セル3S / 11.1V
RPM:3200kv
最大電流:60A
無負荷電流ません:2.8A
内部抵抗:22.3ohm
データ:
3S 11.1V
プロップ:4.75x4.75、5.5x4.5
最大電流:38.5A、50A
プル:700グラム、900グラム
ESC:60A
バッテリタイプ:3Sのみ
Product
Specifications

追加情報

  • 単位:
    D480S-3200
  • Brand:
    Turnigy
  • 重量(g )
    149.00
  • 長さ
    88.00
  • Width:
    45.00
  • 高さ:
    50.00
  • KV ( RPM / V )
    3200.00
  • 最大電流( A )
    60.00
  • 電力( W ):
    0.00
  • 長さB ( mm)の:
    47.00
  • ことができます長さD (ミリメートル)
    45.00
  • 最大電圧( V )
    11.00
  • シャフトA (ミリメートル):
    4.00
  • Unit Weight (g):
    109
  • 直径C (ミリメートル)
    30.00
  • 総丈E (ミリメートル)
    60.00
  • 抵抗( MH ):
    22.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Have mine in a "oldtimer" Multiplex Pico-Jet, and woow, a insane screamer on 3S .I believe it`s in the speed range of the Parkzone Stryker, maybe a little faster. ;) Do see other say its ok running it on 4S, I`l wont be doing that just yet. Even it`s tempting. The motor stays cool and it have lots of power. Quality seem`s really good too.
Quality
Value
Overall
Quality
Value
Overall
This is without a doubt the best motor I have ever owned. I put it in my FPV easyStar fully loaded, and this thing easily puts it into full vertical.

On a three cell it peaks at over 660 watts, and there is talk that it runs fine on a 4 cell.

Without a doubt, this motor has the best power/weight ratio I've ever seen.

and for $25? Wish I could rate it 10 crowns.
Quality
Value
Overall
Quality
Value
Overall
Put this on my old Zagi with a 6.5 x 5 prop HK 60amp ESC and Turnigy 2200mAh 3S 30C. Vertical climbs are possible, limited only by ones ability to see the model. ESC and motor get warm not hot. A great new lease of life to an old favorite model for around $60.
Quality
Value
Overall
Quality
Value
Overall
i think that is the best inruner motor.
Quality
Value
Overall
Quality
Value
Overall
I am using this motor on a Funjet with this
"Hobbyking SS Series 60-70A" ESC
Works great so far with a 6x5E prop
Which timing and other settings would you recommend?
Quality
Value
Overall
Quality
Value
Overall
Bought 2 of these for my funjet, 1 as a spare... draws about 70 plus amp and clocked a speed of 183 kph on a 4 cell setup... using a 4.5 X 4.5 prop.. sweet little thing!!! =) 2 Thumbs up for this motor... =)
Quality
Value
Overall
Quality
Value
Overall
Great motor! We use this on funjets and skyfun! On 4s with 5x5 prop!

It pulls around 100 amps and gives out around 1300 watts!

We tested it with a gps meter and my skyfun goes 235 kp/h!

Its a little beast!
Quality
Value
Overall
Quality
Value
Overall
moteur puissant avec belle finitions



merci hk

Quality
Value
Overall
Quality
Value
Overall
I use this in my funjet on 4s with 6x4 prop, pulling 76 amp and 960 watts, more than 50 flights with no problem, radar gun reads 132MPH, fastest motor on 4s setup I have ever had
Quality
Value
Overall
Quality
Value
Overall
These are well built motors with heaps of power, I used one for my high wing pusher/trainer.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。