新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

TURNIGY 50から45 890kvブラシレスアウトランナー(式:4010)

TURNIGY 50から45 890kvブラシレスアウトランナー(式:4010)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
285 g
SKU:
TR50-45-890
商品概要

モデル :TR50-45
入力電圧 :8〜22V(3〜5SのLi-PO)
KV:10%以内 890回転/ V
Dimentions:50ミリメートルX 45ミリメートル
軸径 :8ミリメートル
重さ :260グラム
推奨モデルの重量 :900〜1500グラム
パワー同等:.36,2stroke
ステータDimentions:40x10mm
スピードコントローラー必須:60A +
推定電力 :700W +

すべてのこれらのモータは、良い品質のベアリング、きちんとした巻線と強力な磁石を持っています。
これは、トルクをたっぷりと光モータです。

Product
Specifications

追加情報

  • 単位:
    TR50-45-890
  • Brand:
    N/A
  • 重量(g )
    285.00
  • 長さ
    0.00
  • Width:
    0.00
  • 高さ:
    0.00
  • KV ( RPM / V )
    890.00
  • 最大電流( A )
    0.00
  • 電力( W ):
    700.00
  • 長さB ( mm)の:
    45.00
  • ことができます長さD (ミリメートル)
    18.00
  • 最大電圧( V )
    18.00
  • シャフトA (ミリメートル):
    8.00
  • Unit Weight (g):
    260
  • 直径C (ミリメートル)
    49.00
  • 総丈E (ミリメートル)
    66.00
  • 抵抗( MH ):
    0.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Yo tengo pedidos a HK 4 motores de este 50-45 y siempre ha estado en mi pedido ya pagado muchos meses...bueno el colmo ahora lo quitaron del pedido y me dijeron que tengo $ 105 en bonos pero el envio quien sabe donde estara...Creo que ni ellos lo saben....Muy mal..Muy mal...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Este motor por su precio es bueno.Yo lo he probado con varios aviones ,y los resultados son buenos poniendo componentes de acuerdo con las caracteristicas de este motor,,,,El problema que tengo tres modelos esperando el envio de HK...Ya tiene 53 dias y todavia estan en backorder....NOTA..Si ya no tienen los productos en venta , quitelos del catalogo para saber y asi no esperarlos tanto tiempo.....Mal servicio de envios....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Este producto con relacion a su precio es bueno,pero el problema es que ya tiene 45 dias que esta en bakorder y no ha sido enviado...Le recomiendo a H.King que esta perdiendo confianza con este sistema de ventas y envios...mucho tiempo de espera...NO VUELVO A COMPRARLES YA NADA...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put it into the 46 size P51 with 13x5 prop, and 4S. It took off and lost power. After retrieving the plane and tested it by the road side, the motor went up in smoke.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am using this motor on a SPAD Deb 62" trainer. Guess what, its not a trainer any more... at half throttle its prop haning!!! I gave this to one of our best pilots at the field and he just loves it. All because of this little Gem. Am using Plush 80A, TR 3.3 4S 30-40C and a Master Airscrew 11x6. Thinking about a SPAD extra with the same setup but with a 12x8 prop. Just waiting for this item to be back in stock. Dont want to backorder and wait where HK some times takes an awful lot of time re-stocking items.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very powerfull motor, and very resistent. This is the only Turnigy motor with 8mm of shaft with 45mm of body, and fits perfect in my project, i use with 6s and no problem. Appears to have hight quality materials, and a strong magnetics, you can catch some metalic objects with the motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor arrived with no mount, the prop washer is too large (it is loose around the shaft) and the nut threaded hole is off center. Despite all of that I am giving it 5 stars. I made made my own mount, replaced crooked nut and oversized washer with good ones :-)

With APC 13X10E propeller, 3 cell 5000 mAh Turnigy LiPo and 60A Turnigy Plush speed controller the motor produced 65A of current, or about 800W of power. Very pleased with its performance. Thank you HK. But please, make sure you include all proper hardware for each item you sell. There are very few customers like me who have facilities to make their own mounts.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works great in a Tower Hobby MKII TRainer with Sentilon100amp and 5S....actually outperformed the Nitro motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I wanted to use this motor in my CAP580 from Great Plane, but at Half-power, it makes a curious sound and stop.... Well If anyone know how to fix it...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Depending in battery used my whattmeter shows different results:

Kokam 4s 2400mA 30C prop 11x8.5"= 50-52A, 650-660W

Turnigy 4s 3300mA 30-40C prop 11x8.5"= >70A,

>1000W!

In my EE Lightning 1900g I settled for:

Turnigy 4s 3300mA prop 11x5.5" > 50A, > 820W and ESC 80A Ubec - Power to spare....

verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。