サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy 5A 1SブラシレスESC

Generating Links

Turnigy 5A 1SブラシレスESC

価格:

Now save 節約 ¥0.00 ¥0.00

¥1,693.87
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
T5A-1S
送料無料したい? クリックする こちらへ 詳細情報を参照する
Turnigy 5A-1S ESCと1S(3.7-4.2v)リポ電池をサポートし、非常に小型軽量のブラシレススピードコントローラ内蔵の0.5A / 5V BEC出力。マイクロヘリと屋内チラシに最適です。
特徴:
マイクロプロセッサー制御
極めて低い抵抗
3Aの連続(5Aサージ)
1Sリポ電池または3セルニッケル水素/ニッカド
高レート調整可能なスイッチング(PWM:8KHzの/ 12kHzの/ 16kHzの)
BEC:最大0.5A(スイッチング)
低電圧カットオフ:3.0V
プログラマブルカットオフタイプ(ソフトカットオフ/ハードカットオフ)
プログラマブルブレーキタイプ(/ソフトブレーキ/ハードブレーキを無効にします)
時間進みプログラマブル(高/低/標準)
プログラマブル電流制限(非常にensitive /標準/無効/小文字を区別しません)
プログラム可能なスタートアップの種類(非常にソフトスタート/ソフトスタート/高速起動)
熱保護(100摂氏)
inrunnerとアウトランナーブラシレスモータのほとんどに適用されます。
アーミングプログラム上の安全な電力は、モータが誤ってオンにならないことが保証されます。
自動シャットダウン信号が失われたり、電波干渉が無線接続.After 3秒以上深刻になるされている場合、最も低い位置にスロットルを動かし、再確立されたモーターを再起動することができます。
注:Turnigyモンスタープログラミングカードを搭載したプログラマブル。
スペック。
電圧:3.0〜4.2V
続き電流:3A
バースト電流:5A
バッテリー:1セルリポ/ 3セルNixx
BEC:5V / 0.5A
サイズ:25 * 13 * 5ミリメートル
重量:2グラム

私たちは、お客様が送信してESCをプログラムしないことを示唆しています。
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Stephen | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 12, 2016

I replaced a brushed motor and Esc for one of theses 1s ESC and a 1-2s brussless motor and now the model flys much better and for longer .
Great result.

Mnogovat | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 04, 2013

.

Sokonomi | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 18, 2012

Just a heads up, these things are not suitable for multicopters. Far too slow to handle it. They are quite nice though.

Knifenslow | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 03, 2011

Great little esc provided you use the sub 2 gram servos so as not to overload the tiny switch mode power supply. I'm running this with an AP03 7500kV motor, 4025 GWS prop, orange Spektrum compatible 4ch receiver and two of the 1.7g linear servos and sub 30g flying weight for vertical performance.

Knifenslow | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 05, 2011

Noticeably more thrust from the AP03 7500 kV motor than I got previously with the XP 3A 1S esc.
It does stutter with the AP03 7500kV motor on startup on the fast start setting and won't start at all on the other two settings unless the prop is given a flip. I haven't experimented yet with the timing mode so see if that helps.
Switch mode esc seems to handle load from orange 2.4 gHz Rx and two 2.5 g sub micro servos without getting hot.

El Tomy | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 10, 2011

Great esc, bec runs 2 hs55's with no problem. Get the program card as it is hard to hear the motor beeps. Pulling 2 amps in the vid.



http://www.youtube.com/watch?v=K7wIipaCIp0

Harrow | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 09, 2010

This is a great ESC. The best part is that even if you use single cell Lipo, it still puts out 5 volts to your radio. That's right, it has a switching voltage booster for the receiver supply!!

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 11, 2009

Very small and light.easy to use.

tonioaltea | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 07, 2009

regolatore leggerisimo per micro motori,funzionale ed a baso costo

顧客ファイル
photo instructions Download [3603]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!