Turnigy 5A SBECは、一定の5Aを供給します高度なスイッチングDC-DCレギュレータです。それは2で動作します - 7細胞Lipolyパックとあなたの受信機に一定の5または6Vを供給し、無干渉です。仕様：タイプ： スイッチング入力保護： 逆極性保護出力（定数）：5V / 5Aまたは6V / 5A
Have running some of this. Works perfect. It easy feeds 6pcs of powersucking 9g Digi Servos in a 2,5m Glider without making some electric trash. I'm happy with it!!works great and its small and light weightGreat use for power up CDI and RXWorks well and the wires are a decent length to begin with so no fussing around trying to get power to it from the main battery. I chose to power it separately from a 2s 1000mah pack for use in one of my large EDF models.Very good and stable voltage.This powers a Raspberry Pi 1 Model B just fine.
But it won't allow a Raspberry Pi 2 to boot - it continually tries to boot but browns out after a second or two, and then repeats. This Pi was tested good using a USB power supply both before and after the test with the SBEC.
Both Pis were tested with a 5200MaH battery, with the SBEC set to 5V and connected to the 5V/GND GPIO pins of the Pi (via a Pi Cobbler and breadboard).
Here's the battery used: http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=84097I wasn't happy powering 6 servos and telemetry unit off the BEC on a 30A ESC so added one of these. Works perfectly.Been using these for years. Have several, very reliable and easier to use than old nimh.At last, i don't have to pull my B17 apart all the time. One of these, another battery and another RX and it saves a heap of time at the field or at home.bon produits de belle qualit et vraiment pas cher