サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy Aerodrive SK3 - 2118年から2750年ブラシレ​​スアウトランナーモーター

Generating Links

Turnigy Aerodrive SK3 - 2118年から2750年ブラシレ​​スアウトランナーモーター

価格:

Now save 節約 ¥0.00 ¥0.00

¥2,417.23
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
SK3-2118-2750
送料無料したい? クリックする こちらへ 詳細情報を参照する

Turnigy SK3モーターズは、モータの品質とデザインで、前方の次の飛躍です。私たちはそれらに利用可能な最高品質の磁石、ベアリングや材料を調達し、モータだろうだけでなく、ライバルを開発し、多くの大手モーターの品質は、今日市場に製造凌駕する技術者に指示しました。

その結果、品質ダブルシールド付きベアリング、焼結ネオジム磁石と毎回を巻き、正確で一貫性を確保した文字列に巻かれたステータを使用して、効率的、高口径のモータです。

Turnigy SK3モータは、妥協のない品質のブラシレスモータを求めているモデラーに適しています。

仕様。
オン:9Tを
電圧:2〜3S Lipoly
RPM / V:2750 KV
内部抵抗:0.22オーム
マックスロード:5A
最大電力:39W
シャフト径:2.0ミリメートル
重量:17グラム
モータープラグ:2ミリメートルブレットコネクタ

  • KV ( RPM / V ) 2750.00
  • 最大電流( A ) 5.00
  • 抵抗( MH ) 220.00
  • 最大電圧( V ) 11.00
  • 電力( W ) 39.00
  • シャフトA (ミリメートル) 2.00
  • 長さB ( mm)の 21.00
  • 直径C (ミリメートル) 21.00
  • ことができます長さD (ミリメートル) 18.00
  • 総丈E (ミリメートル) 25.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Daniel | 確認済みの購入者

  • Overall
  • Quality
  • Value

Perfect

Jul 30, 2017

High quality motor with high power with 3s and 5x4 prop. Little bit problem with O rings because is impossible to assembly them - is not space beetween motor and heads of screws. If you assembly them than is O ring little bit damaged by head of screw and after swith on the power of motor propeller left motor because O ring will tear. I used rubber to ladies hair and all working perfect.

insaneRC | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 29, 2014

I have one of these on a racing plane of mine, I run it on 4s with a 4.7x4 prop. It puts out about 280-300grams thrust, and the plane pushes 120mph. When I land, the motor is just barely warm. Over all this motor is good deal, I think you will not be disappointed. You can also run a 5x5 on 3s, or a 6x4 on 2s.

rappa | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 06, 2014

godd motor!! hobbyking !!!

bstarkey54 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 10, 2014

About 10 people in my club use these motors and they are great!!! We use a 460 to 760 3 cell with no more than a 5 X 4.3 prop. We have put these on our Bonsai's and they just scream. Vertical until out of sight. They put out considerably more watts that that listed. We use the 15 - 18 A ESC's. Prettiest motor around and they scream. Lots of fun.

Yuto Kang | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 01, 2012

I mounted on of these on a 17" F-22 Raptor that I built from foam board. Using a 4045 prop, this F-22 screams on a 3 cell Lipo.
The Raptor with battery is just under 220 gr. and this little motor takes it our of site almost faster than you can cut back on the throttle. Very pleased with the motor and will definitely be order more for other foamies.
While a lot of the other motors seem to have problems with wires breaking or bearing, this motor is built as advertised. It's made really well and out-performs the other little motors of similar size. You won't be disappointed.

SomeUselessGeek | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 11, 2012

39 watts?!? They have GOT to be kidding. Last night I ran one of these motors on a HK EPO Park Jet for four minutes at OVER 100 WATTS. Way more power than I can get out of any other motor this size. At the end of a five minute session (mostly WOT) the motor was barely warm to the touch. Hopefully somebody with some instruments can measure the actual efficiency of this motor and put some numbers down here.

This is my new favorite line of motors.

iacei | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 27, 2011

Very nice powerfull motor on 3S with a 5x4 it rips the lamas ass!

Very good for my fox, even a bit overpowered.

Watch for the Amps though I would suggest a 12A ESC minimum.

顧客ファイル
MotorData(SK3_sv_1811).pdf Download [365]
Drawing Download [87]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!