サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy Aerodrive SK3 - 2122-1800kvブラシレスアウトランナーモーター

Generating Links

Turnigy Aerodrive SK3 - 2122-1800kvブラシレスアウトランナーモーター

価格:

Now save 節約 ¥0.00 ¥0.00

¥2,635.08
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
SK3-2122-1800
送料無料したい? クリックする こちらへ 詳細情報を参照する

Turnigy SK3モーターズは、モータの品質とデザインで、前方の次の飛躍です。私たちはそれらに利用可能な最高品質の磁石、ベアリングや材料を調達し、モータだろうだけでなく、ライバルを開発し、多くの大手モーターの品質は、今日市場に製造凌駕する技術者に指示しました。

その結果、品質ダブルシールド付きベアリング、焼結ネオジム磁石と毎回を巻き、正確で一貫性を確保した文字列に巻かれたステータを使用して、効率的、高口径のモータです。

Turnigy SK3モータは、妥協のない品質のブラシレスモータを求めているモデラーに適しています。

仕様。
オン:7Tを
電圧:2〜3S Lipoly
RPM / V:1800kv
内部抵抗:0.16オーム
マックスロード:7A
最大電力:55W
シャフト径:2.0ミリメートル
重量:23グラム
モータープラグ:2ミリメートルブレットコネクタ



  • KV ( RPM / V ) 1800.00
  • 最大電流( A ) 7.00
  • 抵抗( MH ) 0.00
  • 最大電圧( V ) 11.00
  • 電力( W ) 55.00
  • シャフトA (ミリメートル) 2.00
  • 長さB ( mm)の 24.00
  • 直径C (ミリメートル) 21.00
  • ことができます長さD (ミリメートル) 22.00
  • 総丈E (ミリメートル) 28.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

MilanPastor | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 26, 2012

Dvouplopnk z EPP rozpt 500mm, vha 195g uveze pohodln s 2S LiPo a vrtul 8x4E.

steverb | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 20, 2012

Very small in size, includes 3 motor mounts & pre-soldered connectors .
Prop has to be connected with included prop saver. There is no other way to mount props as shafts do not extend past motor, so keep that in mind.

Jason | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 31, 2012

I just finished a rough static test on my bench here of my friend's SK3-2122-1800kv.

Overall, the motor is small, but packs a pretty big punch. Good solid feeling magnets. The only odd thing is the back of the motor has a screw and self-locking nut (the kind with nylon built into them to keep it from coming off). I'm not sure what that's all about, but the built in prop saver works fine. I didn't have to unscrew the set screws to get the o-ring on, but did have to stretch the o-ring to slip it under the screws. No biggie there.

As noted in the Discussion section, the best prop for 2S operation does appear to be an 8x4 which in my tests gave 230 grams of thrust @ 6.7 V, approx. 46 Watts input power, and approx. 7A input current.

I also tested using a 3S setup and for thrust, the best (of the props I had) was a 5.7x3 which yielded 157 g of thrust @ 4A, 50W, 12.3V.

Here's my numbers:
V : prop : Watts : Amps : Thrust
6.7 : 8x4 : 46 : 7 : 230 g
6.x : 7x6 : 54 : 7 : 215 g
6.0 : 6x5 : 41 : 6 : 153 g
12.25 : 5x5 : 70 : 5.6 : 75 g
12.3 : 5.7x3 : 50 : 4 : 157 g

**NOTE** the above numbers are _rough_ and not meant to be scientifically accurate! They are static and eyballed. Just to give you an idea of what one hobbiest has seen with this motor.

I hope someone finds these number useful. I like the motor. Would be good on a 100 - 150g plane I'd say... doing 3D. Or for sport

ahmad | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 08, 2011

this motor has extreme vertical climb power !!!!! i run on it 2s 20c 610mah rhino pack and it give me around 9 minutes of hard 3 d flying and i use 8x4 gws prop it has more power then original hacker but it drain the battery more then hacker motor but power is awsome!!!!!!! recommendo

顧客ファイル
Prop mount done with 3D printer Download [24]
Drawing letter format 1:1 Download [24]
Drawing Download [58]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!