新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 2822-1090kvブラシレスアウトランナーモーター

Turnigy Aerodrive SK3 - 2822-1090kvブラシレスアウトランナーモーター

QTY:

Now save save AU$0.00 AU$0.00

AU$22.03
Stock:
重量:
98 g
SKU:
SK3-2822-1090

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要

Turnigy SK3モーターズは、モータの品質とデザインで、前方の次の飛躍です。私たちはそれらに利用可能な最高品質の磁石、ベアリングや材料を調達し、モータだろうだけでなく、ライバルを開発し、多くの大手モーターの品質は、今日市場に製造凌駕する技術者に指示しました。

その結果、品質ダブルシールド付きベアリング、焼結ネオジム磁石と毎回を巻き、正確で一貫性を確保した文字列に巻かれたステータを使用して、効率的、高口径のモータです。

Turnigy SK3モータは、妥協のない品質のブラシレスモータを求めているモデラーに適しています。

仕様。
オン:50Tを
電圧:2〜3S Lipoly
RPM / V:1090 KV
内部抵抗:0.235オーム
マックスロード:7A
最大電力:80W
シャフト径:3.0ミリメートル
ボルト穴:16ミリメートル&19ミリメートル
ボルトねじ:M3
重量:31グラム
モータープラグ:3.5ミリメートルブレットコネクタ

Product
Specifications

追加情報

  • 単位:
    SK3-2822-1090
  • Brand:
    いいえ
  • 重量(g )
    98.00
  • 長さ
    105.00
  • Width:
    45.00
  • 高さ:
    80.00
  • KV ( RPM / V )
    1090.00
  • 最大電流( A )
    7.00
  • 電力( W ):
    80.00
  • 長さB ( mm)の:
    21.00
  • ことができます長さD (ミリメートル)
    8.00
  • 最大電圧( V )
    11.00
  • シャフトA (ミリメートル):
    3.00
  • Unit Weight (g):
    31
  • 直径C (ミリメートル)
    28.00
  • 総丈E (ミリメートル)
    33.00
  • 抵抗( MH ):
    235.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Very smooth turning. And very light weight.
Quality
Value
Overall
Quality
Value
Overall
I love these little beasts, strong enough for a FW330, these make my 260 zoom using a 3S 2200 mAh battery. Fancy packaging, and extra mounting bits too.
Quality
Value
Overall
Quality
Value
Overall
Motor macht auf dem Prfstand einen guten Eindruck. Meine Messergebnisse mit Turnigy Lipo 3/1200 und Hobbyking 12 A Regler sowie APC Style Propeller 8x4 von Hobbyking:
6,5 A, 8800 U/min, Schub: 320 g.
Quality
Value
Overall
Quality
Value
Overall
These motors where what I used for a quadcopter build a year ago and lets say they are a great choice. Flight time wise, I'm flying around 10 mins with a 0845 prop, 3s 2200 mah lipo, and 10amp escs. These motors are great for the price, they do get a little bit warm but not close to hot.
As for build quality, there is nothing to complain about except that one of the motors did get bent from a 25ft fall, as the bottom plate (the plate from where the shaft protrudes) seems to be the weakest part of the motor but then again it was 25 feet.
These motors are
Over all, I will buy these motors again as they are cheap, preform well, and look good on my quad.

Note-If you are going to get this motor, get some higher rated esc's because my 10 amp escs do get fairly hot, even at winter time.
Quality
Value
Overall
Quality
Value
Overall
Tested at 12 volts with a 8x4.5" propeller: static thrust = 369 grams, current = 6.82 A, that are good values. But the ball bearings are of a very low quality.

Quality
Value
Overall
Quality
Value
Overall
Good motor for small planes, It runs on 2 or 3 cell lipo and 8x4.5 prop with a 12 amp esc on my Magnum Reloaded.
Quality
Value
Overall
Quality
Value
Overall
These are very good motors, especially for a medium-sized quadcopter (I use the SK450 frame with these). not too expensive, yet good quality. Lots of bang for your buck.
Quality
Value
Overall
Quality
Value
Overall
Bought 2 pcs, but only bench tested them so far: 7.4Amps at 10.4Volt (semi charged 3S LiPo) with 8x4.5" prop. Quality seems fine.
Quality
Value
Overall
Quality
Value
Overall
vraiment tip top ses moteurs,

un ptit bemol, les 3 phases ne sortent pas toujours du mme ct par rapport au fixation du moteur. Ou ptte la faute pas d'chance
Quality
Value
Overall
Quality
Value
Overall
Very nice little motor.
It is a comparable motor to the KDA 20-50S.

33g with 2mm gold connectors and the prop holder (fixed with 3 screws).
The 3 screws are not the best quality, so don't screw them too strong, or the winding will break.

I have measured this motor (and the KDA 20-50S) with my Eagletree gear and uploaded the data to drivecalc. You can use this program to try different props. and find the right configuration.
(Turnigy SK3 2822-1090 - timing high)

perfect motor for small quadcopters:
measured for example following combination:
Turnigy Plush 10A
Maxx Pro. EPP0845 Prop.
Voltage: 11,15V
Current: 8,30A
RPM: 7132
thrust: around 425g

Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

顧客ファイル
Drawing download now [86.05Kb]

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。