サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy Aerodrive SK3 2826-1130kvブラシレスアウトランナーモーター

Generating Links

Turnigy Aerodrive SK3 2826-1130kvブラシレスアウトランナーモーター

価格:

Now save 節約 ¥0.00 ¥0.00

¥3,261.61
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9192000238-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

Turnigy SK3ブラシレスモータはまだモーター進化において一歩前進です。

もう一度、私たちはそれだけではないだろうライバルモーターを開発するエンジニアを指示したが、利用可能な最高品質の磁石、ベアリングや材料を使用して、今日の市場で主導的なモーターの品質を上回ります。

その結果は、効率的で強力な、最も目の肥えたモデラーのための十分な堅牢でモータの優れたシリーズです。

SK3シリーズ用品質二重シールドベアリングのすべてが、焼結ネオジム磁石と文字列に巻かれたステータ(市販の永久磁石の最強タイプ)は、正確で一貫性のある巻線、毎回のようにします。

Turnigy SK3モータは、妥協のない最高品質のブラシレスモータを求めているモデラーのに適しています。

特徴:
•ダブルシールドベアリング
•焼結ネオジム磁石
•文字列に巻かれたステータ
•高品質仕上げ
•スーパースムーズな操作

仕様:
電圧:6.4〜12.6V(2〜3S LiPoly)
RPM / V:1130kv
最大出力:173W
最大電流:17A
アイドル電流:0.95A
抵抗:0.139オーム
シャフト:3ミリメートル
ボルト穴の間隔:16×19ミリメートル
ボルトスレッド:M2
プラグ:3.5ミリメートルの弾丸
推奨ESC:25A
モーター寸法:28のx 26ミリメートル
重量:43グラム

含まれるもの:
モーター
マウント&ネジ
プロップアダプター

  • KV ( RPM / V ) 1130.00
  • 最大電流( A ) 13.00
  • 抵抗( MH ) 139.00
  • 最大電圧( V ) 12.00
  • 電力( W ) 125.00
  • シャフトA (ミリメートル) 3.00
  • 長さB ( mm)の 28.00
  • 直径C (ミリメートル) 28.00
  • ことができます長さD (ミリメートル) 26.00
  • 総丈E (ミリメートル) 31.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

CapnBry | 確認済みの購入者

  • Overall
  • Quality
  • Value

Don't let model number fool you

Dec 11, 2018

I picked up this motor on a super sale, but the 2826 model number is pretty deceptive. That's the overall size of the motor, not the stator diameter and length as most model numbers are. If you check the product specifications, they say the can dimensions are 21x06mm. That seems a little low as this appears to be around a 2208 size motor (only measured from the outside, this is an estimate, it very well might be a 2106). I get 0.6A@8V no-load current, and 0.22ohm phase resistance. The power rating is just 125W, so on 3S you're looking at a max 10A draw. The best match for this motor is probably 3S and a 8x4.5 prop (530-580g thrust), or at most a 9x4.5 (620g thrust) although this isn't a great combination for efficiency. An EMAX 2210 1270KV will give you more thrust at greater efficiency and uses sensible model naming.
The quality is quite good for what it is though, and includes a 5mm shaft prop spinner and mounting bracket/hardware, as well as 3.5mm bullet connectors preinstalled on the motor wires.

Juan D | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 15, 2016

the motor seems high quality but specs are wrong. HK is selling two Aerodrive SK3 2816-1130 with the same name and different specification. The clear or dark picture (with the same name) are the only difference you can see in their list.
I tested this motor up to 12.3A and up to 152W and gets very hot. So my conclusion is that the stated "max current 17A" & "max power 173W" are wrong and the right numbers are those of the other listed motor (dark) with "max current 13A" & "max power 125W". The same issue is going on with other SK3 motors... Hope this help!!!

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!