新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 2826-1240kvブラシレスアウトランナーモーター

Turnigy Aerodrive SK3 - 2826-1240kvブラシレスアウトランナーモーター

QTY:

Now save save AU$0.00 AU$0.00

AU$22.40
Stock:
重量:
116 g
SKU:
SK3-2826-1240

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要

Turnigy SK3モーターズは、モータの品質とデザインで、前方の次の飛躍です。私たちはそれらに利用可能な最高品質の磁石、ベアリングや材料を調達し、モータだろうだけでなく、ライバルを開発し、多くの大手モーターの品質は、今日市場に製造凌駕する技術者に指示しました。

その結果、品質ダブルシールド付きベアリング、焼結ネオジム磁石と毎回を巻き、正確で一貫性を確保した文字列に巻かれたステータを使用して、効率的、高口径のモータです。

Turnigy SK3モータは、妥協のない品質のブラシレスモータを求めているモデラーに適しています。

仕様。
オン:22Tを
電圧:2〜3S Lipoly
RPM / V:1240 KV
内部抵抗:0.095オーム
マックスロード:16A
最大出力:150W
シャフト径:3.0ミリメートル
ボルト穴:16ミリメートル&19ミリメートル
ボルトねじ:M3
重量:45グラム
モータープラグ:3.5ミリメートルブレットコネクタ

Product
Specifications

追加情報

  • 単位:
    SK3-2826-1240
  • Brand:
    いいえ
  • 重量(g )
    116.00
  • 長さ
    110.00
  • Width:
    45.00
  • 高さ:
    80.00
  • KV ( RPM / V )
    1240.00
  • 最大電流( A )
    16.00
  • 電力( W ):
    150.00
  • 長さB ( mm)の:
    28.00
  • ことができます長さD (ミリメートル)
    12.00
  • 最大電圧( V )
    11.00
  • シャフトA (ミリメートル):
    3.00
  • Unit Weight (g):
    45
  • 直径C (ミリメートル)
    28.00
  • 総丈E (ミリメートル)
    40.00
  • 抵抗( MH ):
    95.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I buy this one and the new version to make a fast comperisation if you like to have a detailed test like this entry thank you :) ###

Old Version: hobbyking.com/hobbyking/store/__39312__Turnigy_Aerodrive_SK3_2826_1240kv_Brushless_Outrunner_Motor_EU_warehouse_.html ###

New_Version: hobbyking.com/hobbyking/store/__80588__Turnigy_Aerodrive_SK3_2826_1240kv_Brushless_Outrunner_Motor_EU_Warehouse_.html ###

Quality: the new Version is a little bit better, less spherical bearing clearance, and better black mounting plate.###

Weight: the new one is 2.2 gram Havier because it different propeller mounting everything else is same.###

Performance: New one as 20 gram less Trust, and 0.5 gram/watt /less Efficiency and run Hotter!###

my opinion: What I dont like on the new one: its shaft holding its very big 7 mm this made it difficult to make a hole on a 10 mm Carbon squared tube###

Conclusion: for me win the old one!
Quality
Value
Overall
Quality
Value
Overall
These motors are a lemon! Bought 4 of them, and all 4 were bad right out of the box. The magnets were glued poorly so they touched the inner part, making unpleasant noise and not letting it spin freely. I had to re-glue some magnets, that solved the problem for some time. After about 15 flights one of the motor started to behave weird: it has start to overheat much more than the rest, starting to spin with half-a-second latency (tried diff. ESC to make sure) and making noise again. It finally leaded to a crash - motor stopped in the air, then restore again but it was too late to stabilize. For the money spent I had not expected poor quality like that.
Quality
Value
Overall
Quality
Value
Overall
Very good engine, not a power beast, but very good balanced and silent.
Quality
Value
Overall
Quality
Value
Overall
nice motor, gives out 160w on my 2200 3s pulling only 15.7 amps on a 8x4 prop.

caution for those intending to use it on plane, you will have to reverse the shaft as I think it comes more suitable for multi rotors, but the reversing process is very simple
Quality
Value
Overall
Quality
Value
Overall
Hi

Just a a small prop test for the 2826-1240kv Turnigy Aerodrive .



Using a Hobbyking HK-010 Power Analyser



Battery used

Zippy 30c/40 c - 2200 mah -202 grams



PROPS AMPS WATTS THRUST

7x4 12 148 565

8x3.8 15 187 840

8x4E 12 140 710

9x4.7 17 195 930

9x7.5 26 230 710





Battery used

Zippy Rhino 30c/40 c - 1300 mah - 93gms



PROPS AMPS WATTS THRUST

7x4 10 119 460

8x3.8 13 140 645

8x4E 10 114 640

9x 4.7 15 162 720

9x7.5 23 245 720



I didn't use a prop bigger than a 9 inch because of the maximum Amps on the Motor (16 amps) even then the 9x7.5 was to much

hope this helps

Regards

Vince Nash

Quality
Value
Overall
Quality
Value
Overall
Purchased two of these and both brand new out of the box were bad. I place one into a P-38 and almost lost the plane after the second flight. The motor burnt up in air. I was able to land and save the plane for the next time. When I arrived at home, I started to test the next one out of the box and instantly it fried as well. I can not say that I have had a good experience with this motor.
Quality
Value
Overall
Quality
Value
Overall
Compared to the Turnigy Aerodrive, the SK3 motors are quieter and smoother.

I used 4 of these with 9x4.5 props, QBrain 25amp ESC, and F330 Quad frame. It flew like a dream, smooth and super fast.

I was fooling around and dumped it in the pool, fried the esc, Lipo OK, ESC fried, and 1 motor fried. The other 3 motors were dried out and work fine.
Quality
Value
Overall
Quality
Value
Overall
I purchased two of these to install into a Kenitic, within moments the first one burned out. I then replaced it with the other that I had purchased and it too was bad. I would not recommend this motor, at this time.
Quality
Value
Overall
Quality
Value
Overall
Motor bueno y liviano, espero ponerlo en un Pipe j3 hecho de kit, espero sea suficiente
Quality
Value
Overall
Quality
Value
Overall
Have four of these on my Hobbyking H4 Quadcopter Frame, plenty of power with 10*4.5 props, Quad weight 1,211g and only need half power to hover, plenty left to load the quad with other gadgets. Will buy more.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。