新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 2826-980kvブラシレスアウトランナーモーター

Turnigy Aerodrive SK3 - 2826-980kvブラシレスアウトランナーモーター

QTY:

Now save save AU$0.00 AU$0.00

AU$22.83
Stock:
重量:
113 g
SKU:
SK3-2826-980

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要

Turnigy SK3モーターズは、モータの品質とデザインで、前方の次の飛躍です。私たちはそれらに利用可能な最高品質の磁石、ベアリングや材料を調達し、モータだろうだけでなく、ライバルを開発し、多くの大手モーターの品質は、今日市場に製造凌駕する技術者に指示しました。

その結果、品質ダブルシールド付きベアリング、焼結ネオジム磁石と毎回を巻き、正確で一貫性を確保した文字列に巻かれたステータを使用して、効率的、高口径のモータです。

Turnigy SK3モータは、妥協のない品質のブラシレスモータを求めているモデラーに適しています。

仕様。
オン:30Tを
電圧:2〜3S Lipoly
RPM / V:980 KV
内部抵抗:0.174オーム
マックスロード:10A
最大電力:96W
シャフト径:3.0ミリメートル
ボルト穴:16ミリメートル&19ミリメートル
ボルトねじ:M3
重量:44グラム
モータープラグ:3.5ミリメートルブレットコネクタ

Product
Specifications

追加情報

  • 単位:
    SK3-2826-980
  • Brand:
    いいえ
  • 重量(g )
    113.00
  • 長さ
    110.00
  • Width:
    45.00
  • 高さ:
    80.00
  • KV ( RPM / V )
    980.00
  • 最大電流( A )
    10.00
  • 電力( W ):
    96.00
  • 長さB ( mm)の:
    28.00
  • ことができます長さD (ミリメートル)
    12.00
  • 最大電圧( V )
    11.00
  • シャフトA (ミリメートル):
    3.00
  • Unit Weight (g):
    44
  • 直径C (ミリメートル)
    28.00
  • 総丈E (ミリメートル)
    40.00
  • 抵抗( MH ):
    174.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Used on a Phoenix 2000 glider. After 5 flights, I tryied to put full throttle for 1mn. The motor overheted and burned.
Quality
Value
Overall
Quality
Value
Overall
Der Motor hat exakt die gleichen Daten wie der Hacker A20-30M (30 Turns; 980kV; 0,174 Ohm) und hat in der Praxis auch die gleichen Leistungsdaten. Bei Betrieb mit einem vollen 3s Lipo nimmt er 11,5 A mit einem 9x4,7 Prop. Ein wirklich guter Motor.
Quality
Value
Overall
Quality
Value
Overall
Only three flights so far but pleased. Use it on a 400g Crack Yak Big from RC Factory together with a YEP 20A ESC. Very smooth and fast response, the Yak climbes effortless using 10x4.7 so far but have 10x3.8 to be tested as well.
So far I recommend it. Only negative is that shaft the wrong way for most planes so prop saver cannot be used.
Quality
Value
Overall
Quality
Value
Overall
Better than NTM motors, works great with my Q450, 3S 2650mah lipo, 10X4.5 cheap props and SimonK flashed 30 ESC's (and you can get replacement bearings!)
Quality
Value
Overall
Quality
Value
Overall
Havent yet run these but they seem okay. I would buy these over Tmotors anyday
Quality
Value
Overall
Quality
Value
Overall
I have a number of sk3's in the 28mm range and have found them to be well designed, 'pretty',and quite robust and durable. I have plowed them into old tera ferma many times and have been amazed that, except for a few scratches, they have come through to fly again. Their cost is a bit more but you get what you pay for with sk3's. Power to size and weight is excellent also. Great price too- compare at your LHS and this motor would run $30 to $40. Thanks Turnigy and HK for another fine product.
Quality
Value
Overall
Quality
Value
Overall
Very nice. Combined with HK 12A Blue ESCs and 8x4.5 props on a 550mm DIY stick quad. The frame, bare, came out to 230g. So it is a light quad. The motors are barely warm to the touch, same with the ESCs. Flight time is decent. the motors have been consistent performers over 7-8 sessions. No odd behaviors or sounds. Thanks.
Quality
Value
Overall
Quality
Value
Overall
I was a little concerned about this motor after I placed my order, but that all changed once I sent my bird on its maiden flight. I installed this motor on the hummer epp 3D plane which weighs about 450 grams. After the maiden, (8-10 min of flight), I checked my set-up for heat, and everything was cool to the touch. Overall, I am very happy with this motor. It is a nice little efficient package for my set-up. I am running it with a 3cell 1100 man batt, a 25-30 esc (over the top), and a 1047SF prop.
Quality
Value
Overall
Quality
Value
Overall
Ich habe 6 dieser Motoren bestellt. Innerhalb von krzester Zeit mit GLS geliefert. Verwendet werden sie in einem Hexacopter. Als Prop benutze ich einen Standart GWS Slowfly von HK.
Die Motoren sind ausgezeichnet gewuchtet und von sehr guter Qualitaet.
Quality
Value
Overall
Quality
Value
Overall
iuse them on my mini quadcopter works great no bearing issues runs flawless
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

顧客ファイル
Drawing download now [85.91Kb]

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。