サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy Aerodrive SK3 2830-920kvブラシレスアウトランナーモーター

Generating Links

Turnigy Aerodrive SK3 2830-920kvブラシレスアウトランナーモーター

価格:

Now save 節約 ¥0.00 ¥0.00

¥4,227.71
数量:
出荷先:
  • Global
現在の状況:
在庫あり
SKU:
9192000242-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

Turnigy SK3ブラシレスモータはまだモーター進化において一歩前進です。

もう一度、私たちはそれだけではないだろうライバルモーターを開発するエンジニアを指示したが、利用可能な最高品質の磁石、ベアリングや材料を使用して、今日の市場で主導的なモーターの品質を上回ります。

その結果は、効率的で強力な、最も目の肥えたモデラーのための十分な堅牢でモータの優れたシリーズです。

SK3シリーズ用品質二重シールドベアリングのすべてが、焼結ネオジム磁石と文字列に巻かれたステータ(市販の永久磁石の最強タイプ)は、正確で一貫性のある巻線、毎回のようにします。

Turnigy SK3モータは、妥協のない最高品質のブラシレスモータを求めているモデラーのに適しています。

特徴:
•ダブルシールドベアリング
•焼結ネオジム磁石
•文字列に巻かれたステータ
•高品質仕上げ
•スーパースムーズな操作

仕様:
電圧:6.4〜12.6V(2〜3S LiPoly)
RPM / V:920kv
最大出力:165W
最大電流:17A
アイドル電流:0.95A
抵抗:140mh
シャフト:3ミリメートル
ボルト穴の間隔:16×19ミリメートル
ボルトスレッド:M2
プラグ:3.5ミリメートルの弾丸
推奨ESC:20A
モーター寸法:30×28ミリメートル
重量:55グラム

含まれるもの:
モーター
マウント&ネジ
プロップアダプター

  • KV ( RPM / V ) 920.00
  • 最大電流( A ) 16.00
  • 抵抗( MH ) 140.00
  • 最大電圧( V ) 12.00
  • 電力( W ) 150.00
  • シャフトA (ミリメートル) 3.00
  • 長さB ( mm)の 32.00
  • 直径C (ミリメートル) 28.00
  • ことができます長さD (ミリメートル) 30.00
  • 総丈E (ミリメートル) 48.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Rick | 確認済みの購入者

  • Overall
  • Quality
  • Value

Seems OK

Nov 16, 2022

I bought this for an older ARF. It wasn't a perfect fit because Electrifly uses a proprietary mount in order to get people to buy their overpriced merch, but with a little engineering I fit it in. It runs but I have not yet flown it.

Marianne | 確認済みの購入者

  • Overall
  • Quality
  • Value

Very good motor

Apr 22, 2022

I use these motors in 1/16 scale tank models. They are perfect, they don´t need a lot of current, are quiet and have a lot of power.

Maxime | 確認済みの購入者

  • Overall
  • Quality
  • Value

Good but...

Sep 06, 2021

Good motor but not with a Tower Pro Slowfly Propeller 9x6 Bone as the motor after 2mn flight at 50/60% throttle was VERY hot.
My 3D printed Albatros didn't appreciate.
No recommanded proppeler in description. No manual. It's why I put only 3 stars on overall rate.

erwin | 確認済みの購入者

  • Overall
  • Quality
  • Value

a good replacement

Jan 30, 2020

I tested the 2836 with my Dachgleiter 2800 g weight no problem with 9" propeller and Battery 11,1 V This motor is a replacement for planes up to 2000 g .

SandyGabby | 確認済みの購入者

  • Overall
  • Quality
  • Value

Inexpensive perfection

Aug 12, 2019

Every plane that I have built over the last 6 years has an Aerodrive SK3 motor. I have purchased over 50 of the SK3 motors of various sizes and have not had a failure yet. They are installed in planes from 8 ounces to over 20 pounds.

Mike | 確認済みの購入者

  • Overall
  • Quality
  • Value

Barely enough for the Phoenix 1600 on 3S

Jun 03, 2019

I've been looking for something to fit the HK Phoenix 1600 motor glider running the stock prop and spinner on 3S. This motor is up to the task if you use throttle management. After running down a 1500mAh pack at 50-100% throttle the motor came down very hot to the touch but I think I will stick with it as I tend to use too much throttle on maidens.

Michael | 確認済みの購入者

  • Overall
  • Quality
  • Value

Ok in Phoenix 1600

Apr 26, 2019

Bought this for the phoenix1600 glider as a replacement for the stock motor that burned out and hobbyking’s SK3 2822 replacement that also burned out due to a faulty esc (now replaced). The 2822 was way undersized anyway.
This motor runs about 15.1A on the stock prop using 3S 1500mah nano tech pack. Doesn’t get very hot in bench testing.
Main problem is the shaft is pointed the wrong direction for this style of plane so you’ll need a set of small Allen keys to reverse it. It has flat keyed parts on the shaft that would put it at a weird length so I didn’t use them.
Can recommend this motor size and kv for the Phoenix 1600 with stock prop which measures around 10x5 but isn’t marked. Just try get the version with the shaft coming out of the stator end to avoid having to swap it around.

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!