サプライヤーになる ブログ
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Turnigy Aerodrive SK3 - 3530-1340kvブラシレスアウトランナーモーター

Generating Links

Turnigy Aerodrive SK3 - 3530-1340kvブラシレスアウトランナーモーター

価格:

Now save 節約 ¥0.00 ¥0.00

¥5,108.45
出荷先:
  • USA
  • Global
購入済み
到着予定時刻: 着予定時刻はありません [ ? ]
現在の状況:
在庫切れ!
SKU:
SK3-3530-1340
送料無料したい? クリックする こちらへ 詳細情報を参照する

Turnigy SK3モーターズは、モータの品質とデザインで、前方の次の飛躍です。私たちはそれらに利用可能な最高品質の磁石、ベアリングや材料を調達し、モータだろうだけでなく、ライバルを開発し、多くの大手モーターの品質は、今日市場に製造凌駕する技術者に指示しました。

その結果、品質ダブルシールド付きベアリング、焼結ネオジム磁石と毎回を巻き、正確で一貫性を確保した文字列に巻かれたステータを使用して、効率的、高口径のモータです。

Turnigy SK3モータは、妥協のない品質のブラシレスモータを求めているモデラーに適しています。

仕様。
オン:24Tを
電圧:2〜3S Lipoly
RPM / V:1340 KV
内部抵抗:0.052オーム
マックスロード:28A
最大出力:375W
シャフト径:4.0ミリメートル
ボルト穴:25ミリメートル
ボルトねじ:M3
重量:76グラム
モータープラグ:3.5ミリメートルブレットコネクタ

  • KV ( RPM / V ) 1340.00
  • 最大電流( A ) 28.00
  • 抵抗( MH ) 52.00
  • 最大電圧( V ) 11.00
  • 電力( W ) 375.00
  • シャフトA (ミリメートル) 4.00
  • 長さB ( mm)の 32.00
  • 直径C (ミリメートル) 35.00
  • ことができます長さD (ミリメートル) 30.00
  • 総丈E (ミリメートル) 52.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

none | 確認済みの購入者

  • Overall
  • Quality
  • Value

Excellent replacement motor

Jun 17, 2022

motor that came with train star assent was pure junk. locked up after a few minutes. The SK3 replaced it after spacers installed.

Alain | 確認済みの購入者

  • Overall
  • Quality
  • Value

OK

Nov 12, 2021

Bon produit à un prix abordable

Rudog | 確認済みの購入者

  • Overall
  • Quality
  • Value

Motor can be excellent.....

Dec 16, 2019

....replacement for some of the Avios and Durafly r/c aircraft models

David | 確認済みの購入者

  • Overall
  • Quality
  • Value

Amazing motor!

Mar 10, 2017

I use this for my Flight Test foam board airplanes the require the C power pack and it turns my planes into rocket ships! I use a 9x6 prop with a Plush 40 amp esc and a 3S 2200 40 c battery. That is the magical combination and is fantastic!!!

michael | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 23, 2016

So disappointed: The SK3 3530 out of the box looks like quality construction but I needed to reverse the position of the shaft. Done it before should be no problem right? This motor does not come with an allan wrench like the Eflite motors do, after selecting the proper wrench size and getting a good tight fit, the set screws stripped out because they were too soft, that's it, the motor is now useless 5minutes out of the box, maybe stick with Eflite if you anticipate needing to reverse the shaft position.

Matthew | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 16, 2015

"A leap forward in quality" WHAT A JOKE. I bought 4 of the motors, initially one was faulty (Bad bearing). Hobby king replaced it. Now, another has failed. I'm staying away from cheap crap with projects I care about. I would advise you to do the same.

Gabe | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 03, 2014

I use this motor for ssc combat. 4 cell 2650 mah 40 c batt. 8x3 ma combat prop. 60 amp plush esc. This combo flys circles around glow powered ssc combat planes. Give it a try you won't regret it.

Gyula | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 22, 2014

Few measurements of static thurst:
GWS sw 9x4.7, 441w,1200g; (Best power, 1500 mAh 3s 20 c is on limit!!!)
Graupner e 8x4, 300w, 840g; (Best efficiency)
APC e 8x6, 420w, 780g; (lost efficiency not a good choice)
GWS sw 8x4.7, 420 w, 1010g; (More power if you need, but lost efficiency!)
Excellent for 500-600 g 3d, with avarage half throtle 10-12 min on 1500 mAh (with the help of wind :-)), 3s with graupner prop , or best power with GWS sw 9x4.7 if you have enough accu power with low weight.

CReal | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 30, 2013

I just wrote a review yesterday but I have to write this, with the smallest carbon fiber folding prop that can be purchased here that is the 9,5x5 size this motor draws 32amps static on the ground at 12500rpm, and in the air 28amps 13500rpm 10,2v... What the hell read the description, what is written there is what you get. Amazing motor!

CReal | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 29, 2013

Had my first flight with this motor with a phoenix 2000 glider. The plane comes with a folding 10x6 prop, too much for this but here is some data, will get smaller prop.
tgy super brain 40a data with 2.2 25-50c nano:
no load current 3.3a 20k rpm
10.6v 49a 10800rpm on the ground static
10.5v 43a 11700rpm in the air.(about 100-110km/h)
note that on 80pcnt throttle amp draw is 25-26a at 10600rpm, so with a smaller prop it spins like there is no tomorrow for sure.

Will get smaller prop but its a really great motor, will buy sk3 or ntm in the future.

  1. 1
  2. 2
  3. 3
顧客ファイル
another view from mike rimfir.10 vs sk3 Download [1367]
rimfire.10 vs sk3 3530 1340 from mike Download [1428]
SK3-3530(DT3007-14P) MOTOR (edited).pdf Download [131]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー