新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

TURNIGY AerodriveXp SK 3548-970 / 850W

TURNIGY AerodriveXp SK 3548-970 / 850W

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
215 g
SKU:
SK-3548-970

Combine

essential items and
acc
商品概要

TURNIGY AerodriveXp SKシリーズ
AerodriveXP SKシリーズモータは、それらのR / Cプレーンのためのアウトランナー技術の最高をしたい人のために設計されています。典型的には約8〜10%の効率改善は、同様のクラス化モーター上見ることができます。

モデル:SK-3548-970kv
オン:8
抵抗:0.024RM
アイドル電流:1.78A
缶のサイズ:35ミリメートル
ことができます長さ:48.5ミリメートル
重さ:167グラム
シャフト:5ミリメートル
最大アンペア:60A
最大ワット:850W
ボルト穴:M3
ボルト間隔:25ミリメートル
ベアリング:NMBデュアル特大
セル数:3〜4セルLipoly
マグネットタイプ:N45SH
推奨プロップ:14x7
パワー同等:0.25 0.46グローエンジンに

Product
Specifications

追加情報

  • 単位:
    SK-3548-970
  • Brand:
    N/A
  • 重量(g )
    215.00
  • 長さ
    0.00
  • Width:
    0.00
  • 高さ:
    0.00
  • KV ( RPM / V )
    970.00
  • 最大電流( A )
    60.00
  • 電力( W ):
    850.00
  • 長さB ( mm)の:
    49.00
  • ことができます長さD (ミリメートル)
    36.00
  • 最大電圧( V )
    15.00
  • シャフトA (ミリメートル):
    5.00
  • Unit Weight (g):
    167
  • 直径C (ミリメートル)
    35.00
  • 総丈E (ミリメートル)
    70.00
  • 抵抗( MH ):
    24.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
5 selle
provato il motore a banco con Lipo 4S 4500mA 30c;
con elica APCe 14/7 58 A assorbimento, 3,4 kg trazione
con elica APCe 13/6,5 50 A assorbimento, 3 kg trazione
Sono molto soddisfatto di questo motore risponde a quanto dichiarato.
Equipagger il mio bimotore C27J , 260 cm apertura alare, con due di questi motori.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is awesome. I have used it to power a 72inch wingspan Falcon. It was to powerful for this model so I have now transferred it to power a Wot 4 using a 12x6 APC prop. on 4 cells performance is ballistic. On 3 cells the model flies aerobatically. This motor is very versatile and will handle a variety of props and models. I am very impressed!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Le moteur est arriv avec le bobinage brul et deux ferrites qui accrochaient (sans doute un test avant trop pouss expdition suivi d une chute) c'est le deuxime que j ai le premier est toujours impeccable.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I Just finished the plane and it has a 11" x 7 three blade prop , Master Aircrew.The motor run smooth and strong giving 88 watts . 50 A. enough to lift up my Pilatus Porter that I show you by clicking the tab FILES.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent little motor with real power.
Here's what I got with a watts-meter.
1) Turnigy battery 3000 mah , 4 cell , 20 C
12 x 6 prop , 900 watts , 62 Amp
11 x 7 prop , 890 watts , 54 amp.
These calculations are made for flying a VQ Pilatus Porter , arround 6 pound model . This means that the engine behaves like a size .46
I think the best option would have been flying it with a propeller 13 x 5 , three blade prop from Xoar, but no body has it in stock.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
14.03.2011

Bench Test with my Watts Up:

Nano-Tech 2200 3S 45C, 11x6 Chery Wood E, 460W, 42,5A

I think a 12 x 5 Propeller wil be good too.



Zippy 2800 4S, APC 14x7E, 948W, 71,2A,

Zippy 2800 4S, APC 13x6,5E, 970W, 70,7A

Zippy 2800 4S, APC 12x8E, 936,7W, 67,5A

Zippy 2800 4S, APC 11x6,5, 810W, 56,5A

for 4S lipos I recommend 12x5 propeller.

in this test with 4S lipos after 30 sec. the motortemp. was /- 50C





verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received this engine and i was disappointing to find out that a magnet is probably loose and it touches the rotor at a certain point during the rotation. I will have to disassemble it and try to glue it with either CA or epoxy. Hope it works as advertised afterwards, for now I will give it only 2 points due to the low quality of assembly and need of finishing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Il motore verr montato sul Mentor della Multiplex per fare aerotraino; appena fatti i test a banco lo monter e poster i risultati.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Habe diesen Motor in einen Sprinter ( Reichert Modell CZ) eingebaut Top Leistung und ein Super Preis
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought two of these, and installed one on a EFlite Ultimate running 4S and a 11X8.5 APC prop. Motor mount had to be modified to fit the plane, it appears to be non-standard versus other Turnigy 3548 motors. Plenty of power and torque. Runs pretty quiet, and the amp draw on this setup is 42A and about 650W. Overall a good motor, but plan on modifying the motor mount to adapt to firewall screw spacing. I only put about 5 flights on this setup so far, but I am satisfied with this product!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。